Many industries use mechanical parts that place heavy demands on the steel used. Depending on the targeted function, the needed special properties may be mechanical strength, weldability, machinabilit...

Alloy 304/304H (UNS S30400/ S30409)is a modification of the most widely utilized "18-8" chromium-nickel austenitic stainless steel. The carbon content is controlled in the range of 0.04-0.10...

Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding. As a result, this alloy can be used in the ”as-wel...

304LN is used where an extremely low level of magnetic permeability is required. This derives from its high nitrogen content. Approximate Composition – 18% Cr, 9% Ni, 0.15% N (Exact composi...

Alloy 316L is molybdenum-bearing austenitic stainless steel. The higher nickel and molybdenum content in this grade allows it to demonstrate better overall corrosion resistant properties than 304, ...

Alloy 321 (UNS S32100) is stabilized stainless steel which offers as its main advantage an excellent resistance to intergranular corrosion following exposure to temperatures in the chromium carbide...

General Properties Alloy 347 is a stabilized, austenitic, chromium steel containing columbium which allows for the elimination of carbide precipitation, and, consequently, intergranualr cor...

STANDARDS INDUSTEEL TRADEMARKS UNS ASTM EURONORMS EN SUS ...

General Properties Alloy 420 is a hardenable, martensitic stainless steel that is a modification of Alloy 410. Similar to 410, it contains a minimum of 12% chromium, just sufficient enough to...

Nitronic 50 (S20910,xm-19) Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material. This austenitic stainless steel produce ...

A cold work tool steel, combining a high compression strength and a very good toughness. Its other advantages are a particularly high resistance to thermal softening and a good machinability in the...

Industeel can make heavy ingots up to 130 t unit weight in a full range of special steel chemistries. These ingots can then be transformed into high quality extra-heavy plates through a unique combina...