Outdoor project connects the feeder optical cable led out from the premise to the distribution optical cable led in the user’s building. The outdoor project involves such products as Fiber Distribution Cabinets, and Fiber Splice Closures. Fiber Distribution Cabinets can be selected depending on different ODN structures. It completes inlet and fixing of optical cables, splicing and termination of fibers and installation and management of optical splitter on an xPON access network and implements optical line splitting and capacity expansion. It can be used to install the optical splitter with different numbers of optical splitting ports. Fiber Splice Closures provide splice function between feeder cables and distribution cables. On the FTTx network, the fiber splice closures can also take over some functions of Fiber Distribution Cabinets. Fiber distribution cabinet Used for rapid network deployment this cabinet offers connection, distribution and dispatching of communication optical cables from the central office to each optical distribution node. It provides secure and reliable management of flexible fiber and optical cables. Features 1. High-quality steel sheet, surface plastic spray 2. Effective sealing performance, dust and splash proof: IP65 3. Single door, front operation 4. Modular structure, easy configuration 5. Rotary structure of optical patch panel 6. Available in FC, SC, ST, duplex LC adapters 7. Storage of the pigtails or fiber patch cords at the front 8. Perfect fiber route design to ensure bend radius of fibers 9. Reliable optical cable fixing, stripping protection and grounding Wall mount distribution box A indoor distribution system mainly adopted as a base station with base band unit (BBU) and radio remote unit (RRU). With the introduction of multiband RRU, indoor distribution systems need a large number of fiber resources. Sufficient fiber resources should be distributed and routed at one time in during the installation process. To meet the demands of various equipment interface from potential manufactures, pre-distributed multi-fibers should be terminated using the tower-mounted distribution box. It implements such functions as the inlet, fixation, and stripping protection for subscriber cables, splicing, protection, storage and management for optical fibers. It is used for connection from fiber to tower or from fiber to building, for connecting RRU and BBU. It is installed in the building or OSP near the antenna. Features 1. Pleasant appearance, easy installation single-mode double-fiber outside patch cord 2. Using bottom cable inlet locations, no interference among cables 3. Well designed structure and layout, convenient for routing and maintenance 4. Sealed enclosures protect fibers from rain and dust 5. Full front operation, single door 6. Termination using duplex LC adapter, mating with adapter at RRU end 7. Selective lower sealing assembly, compatible with outdoor connector and outdoor LC-type dual jumper fiber 8. Supporting wall-mounted or pole-mounted, adjustable range for pole-mounted is 60mm-120mm Fiber Splice Closure The optical fiber distribution box is applicable to connection and distribution management of optical cables. On the FTTx network, the fiber splice closure can also take over some functions of the optical cross connection cabinet and optical distribution box, and higher requirements are put forward for the number of inlet cables of the fiber splice closure. FTTC Outdoor Cabinet Feature 1. For FTTC application and can accommodate DSLAM, AG equipment 2. Single or several cabinets structure 3. Suit for base-mounted or overhead mounted FTTB Outdoor Cabinet Features 1. Provide broadband and voice service 2. Modular design with single or multi compartments to accommodate ONU equipment, batteries and voice & broadband blocks 3. Wall mounting or floor installation with plinth

Premises products used in residential buildings and office buildings (buildings of governments, enterprises and institutions, and commerce centers are added), connecting distribution optical cables to the cables connecting to the ONU. Based on optical access of different user groups, the project involves these products including optical distribution box, splice box, optical terminal box, fiber storage box, protection box, corridor optical cable, and drop cable. The fiber distribution hub completes functions such as optical cable inlet and fixing, fiber splicing and termination, optical splitter installation management, and drop cable coiling, storage, fixing, and splicing, and implements branch capacity expansion for the optical line. The optical fiber distribution box is used to connect to backbone optical cables and user access optical cables. It functions to distribute backbone optical cables and implements dispatching management. As a splicing device for FTTH, the splice box completes connection and distribution of backbone optical cables and subscriber optical cables. The optical terminal box is used to connect the optical cables of subscriber lines to optical fiber terminals and optical cables, and to implement functions such as optical cable inlet, fixing and stripping protection, fiber splicing and protection, and storage of pigtails or drop cables. The fiber storage box stores the drop cable before it enters the room. Fiber Distribution Hub Suitable for use in the network where optical splitters are distributed. It offers optical cable stripping and a fixing assembly, optical splitter module, splicing module, and storage area, completes the functions of optical cable inlet fixing, fiber splicing and termination, optical splitter installation management, and coiling, storage, fixing, and splicing of single-fiber drop cables, and implements optical splitting and capacity expansion of optical lines. Features 1. Material: non-metal 2. Integrated various optical splitter 3. Rotary distribution panel, double-layer cable management 4. Bow-type drop cable connector made in the field, redundant length cable storage inside 5. Smaller size under the same splitting port 6. Parking area for temporary storage of connectors 7. Applicable in multiple cables: drop cable, optical cable 8. Perfect fiber route design to ensure bend radius of fibers 9. Backbone optical cable is tap-off 10. Dust and splash proof: IP55(Outdoor) Fiber terminal Box An optical access device for FTTH, it can implement connection and distribution of backbone cables and subscriber cables. It is used in splicing (or mechanical splicing) and distribution of fibers. It is all wall mounted. Features 1. Two types: indoor and outdoor 2. Material: metal 3. Pleasant appearance 4. Available in SC, duplex-LC adapters 5. Lead in / out drop cables or fiber cable 6. Perfect fiber route design to ensure bend radius of fibers 7. Dust and splash proof: IP55(Outdoor) Splice Box As an optical access device for FTTH, it can implement connection and distribution of backbone cables and subscriber cables. It is all wall mounted, and can be used and maintained conveniently. Features 1. Corridor or light current well wall mounting 2. Plastic and rubber hub, pleasing appearance, small size, suitable for most applications 3. Bow-type drop cable can be spliced or mechanically spliced, and redundant length can be stored in the hub 4. Single bow-type drop cables fixed piece by piece, convenience for construction and maintenance 5. Applicable to tap-off application of backbone optical cables 6. Perfect fiber route design to ensure bend radius of fibers Smart Information Box Used for installation and management of Optical Network Unit (ONU) access in FTTH mode. It is applicable for household applications. Features 1. Plastic door frame and cover, pleasant appearance 2. Plastic bottom case (type-A box), metal bottom case (type-B box) 3. Removable door frame and door panel, convenient field construction and operation 4. Knock-down inlet holes on all sides of the box, convenience for routing 5. Type-A box for installing network distribution modules and telephone distribution modules 6. Type-B box for installing network distribution modules, telephone distribution modules, cable TV distribution modules and security modules Socket-outlet Features 1. Independent use 2. Quality Polycarbonate (PC ) material, with perfect fireproof performance 3. Allowing storage of a small quantity of redundant fibers

50HZ(1500RPM)-3Phase 400V/230V Genset Model Power(KW/KVA) Engine FUEK TANK Data Download Prime Standby Perkins Control SPW33 24/30 26.4/33 1103A-33G Mech BASK TANK Download SPW50 36/45 40/50 1103A-33TG1 Mech Download SPW67 49/61 53/67 1103A-33TG2 Mech Download SPW227 165/206 182/227 1506A-E88TAG1 ECM Download SPW265 190/238 212/265 1506A-E88TAG2 ECM Download SPW275 200/250 220/275 1506A-E88TAG3 ECM Download SPW308 224/280 246/308 1506A-E88TAG4 ECM Download SPW350 255/319 280/350 1506A-E88TAG5 ECM Download SPW400 280/350 320/400 2206C-E13TAG2 ECM NONE TANK Download SPW450 320/400 360/450 2206C-E13TAG3 ECM Download SPW500 360/450 400/500 2506C-E15TAG1 ECM Download SPW565 412/515 452/565 2506C-E15TAG2 ECM Download SPW680 495/619 544/680 2806C-E18TAG1A ECM Download SPW725 535/670 580/725 2806A-E18TAG2 ECM Download SPW825 600/750 660/825 4006-23TAG2A Electric Download SPW880 640/800 704/880 4006-23TAG3A Electric Download SPW1006 732/915 805/1006 4008TAG1A Electric Download SPW1128 820/1025 902/1128 4008TAG2A Electric Download SPW1250 906/1133 1000/1250 4008-30TAG3 Electric Download SPW1395 1012/1265 1116/1395 4012-46TWG2A Electric Download SPW1520 1105/1382 1216/1520 4012-46TWG3A Electric Download SPW1650 1200/1500 1320/1650 4012-46TAG2A Electric Download SPW1910 1388/1735 1528/1910 4012-46TAG3A Electric Download SPW2037 1480/1850 1630/2037 4016TAG1A Electric Download SPW2033 1505/1881 1626/2033 4016-61TRG1 Electric Download SPW2275 1656/2070 1820/2275 4016TAG2A Electric Download SPW2234 1626/2031 1788/2234 4016-61TRG2 Electric Download SPW2515 1810/2263 2012/2515 4016-61TRG3 Electric Download

50HZ(1500RPM)-3Phase 400V/230V(1phase 230v) Genset Model Power(KW/KVA) Engine FUEL TANK Data Download Continuous Standby Kubota Control SKW8.3-1P 6/7.5 6.6/8.3 D1105-BG Mech BASK TANK Download SKW10.6-1P 7.7/9.6 8.5/10.6 D1105-BG Mech Download SKW14-1P 10/12.5 11/14 V1505-BG Mech Download SKW16.5-1P 12/15 13.2/16.5 D1703-BG Mech Download SKW22.5-1P 16/20 18/22.5 V2203-BG Mech Download SKW25-1P 18/23 20/25 V2003-T-BG Mech Download SKW32.5-1P 24/30 26/32.5 V3300-BG Mech Download SKW40-1P 29/36 32/40 V3300-T-BG Mech Download SKW11 8/10 8.8/11 D1105-BG Mech Download SKW14 10/12.5 11/14 V1505-BG Mech Download SKW16.5 12/15 13.2/16.5 D1703-BG Mech Download SKW22.5 16/20 18/22.5 V2203-BG Mech Download SKW25 18/23 20/25 V2003-T-BG Mech Download SKW32.5 24/30 26/32.5 V3300-BG Mech Download SKW40 29/36 32/40 V3300-T-BG Mech Download 60HZ(1800RPM)-3Phase 220V/127V(1phase 220v) Genset Model Power(KW/KVA) Engine FUEL TANK Data Download Continuous Standby Kubota Control SKW8.8X-1P 6.4/8 7/8.75 D1105-BG Mech BASK TANK Download SKW12.8X-1P 9.3/11.6 10.2/12.8 D1105-BG Mech Download SKW16.5X-1P 12/15 13.2/16.5 V1505-BG Mech Download SKW20X-1P 14.5/18 16/20 D1703-BG Mech Download SKW22X-1P 16/20 17.6/22 V2203-BG Mech Download SKW26.5X-1P 19.3/24 21.2/26.5 V2203-BG Mech Download SKW30X-1P 22/27 24.2/30 V2003-T-BG Mech Download SKW40.4X-1P 29.4/37 32.3/40.4 V3300-BG Mech Download SKW49X-1P 35.4/44 39/49 V3300-T-BG Mech Download SKW9.5X 7/8.75 7.6/9.5 D1105-BG Mech Download SKW13.2X 9.6/12 10.6/13.2 D1105-BG Mech Download SKW16.5X 12/15 13.2/16.5 V1505-BG Mech Download SKW20X 14.5/18 16/20 D1703-BG Mech Download SKW22X 16/20 17.6/22 V2203-BG Mech Download SKW26.5X 19.3/24 21.2/26.5 V2203-BG Mech Download SKW30X 22/27 24.2/30 V2003-T-BG Mech Download SKW40.4X 29.4/37 32.3/40.4 V3300-BG Mech Download SKW49X 35.4/44 39/49 V3300-T-BG Mech Download

4VS Standard Equipment 2VS600 Light style & IP grade LED Flood & IP66 Light number & power 2x300W LED luminous efficiency (LM/W) 130 LED life-span(h) ＞50000 Batteries style Solar gel battery Batteries number & capacity (Ah) 4x200 Battery & light rated voltage (V, DC) 24 Solar module number & most power (W) 4x235 Luminous flux (LM/light) 39000 Solar module tilt adjusting 0°~ 30° Length x Width x Height (mm) 3380x1345x2160 Weight without any options (kg) 500 Height (Mast extended fully, m) 6.2 Mast lifting Mannully Light tilt Manually Mast sections number 5 Trailer suspension system & wheel rim Leaf springs & single axle without brake Optional equipment & upgrades Charging generator Kohler genset Wind power (number & maximum power) 1*400W Main Charger Floating charger

4HVP Basic Model 4HVL/P4000 Dimensions Length 3420mm (11’2’’) Width 2800 mm(9’2’’) Height 2460mm (8’1’’) Full extending height 8.84m (29’) Gross weight 1410kg (3110 lb) Engine Engine model D1105 (KUBOTA) Speed(rpm) 1500/1800 Number of cylinders 3 Engine characters 4 cycles,Watercooled diesel Combustion System E-TVS Engine aspiration Naturally aspirated Emission level Regular Alternator Standard configuration SPARKS Frequency(Hz) 50/60 Rating voltage (V,AC) 230/240-120 VAC Alternator insulation Class H Alternator protection grade IP23 Mast & Lights Type of Lights Regular metal halide Light’s fixture Rectagle(GEWISS) Luminous flux 110000 LM/light Number & power of lights 4x1000W Number of mast sections 7 Mast extension Hydraulic Mast rotation Manually, max. 330° lockable Light bar tilt 12VDC Electric linear actuator Trailer Trailer suspension & axle with brakes Leaf springs & single axle with mechanical brakes Tow bar Retractable & adjustable supporting wheel tow bar Stabilizing legs & number 4 pcs extendable bar with manually retractable jacks 4 pcs hydraulic pivot legs Wheel’s rim size & tires 16" rim with regular tires Tow adapter 2" or 50 mm ball adapter Tail light Tail light kit Max towing speed 100km/h (62 mph) Additional Features Fuel tank Type Double wall sub-fueltank Fuel tank capacity 120 liters (31 US gallons) Operating hours with full fuel 84 hours Wires & electric components Regular Generator controller DSE 702AS Max. against wind 20 m/s (45 mph) Acoustic pressure 72dB(A) at 7 meters away Standard colour SWT orange trunk, black or galvanized all of the steel components Max. # of units loading in 40’ high container (Some components would be detached) 7 Basic Model 4HVL/P6000 4HVL/P1200 Dimensions Length 3420mm (11’2’’) Width 2800 mm(9’2’’) Height 2460mm (8’1’’) Full extending height 8.84m (29’) Gross weight 1410kg (3110 lb) 1360kg (3000 lb) Engine Engine model D1105 (KUBOTA) Z482 (KUBOTA) Speed(rpm) 1500/1800 3000/3600 Number of cylinders 3 2 Engine characters 4 cycles,Watercooled diesel Combustion System E-TVS Engine aspiration Naturally aspirated Emission level Regular Alternator Standard configuration SPARKS Frequency(Hz) 50/60 Rating voltage (V,AC) 230/240-120 VAC Alternator insulation Class H Alternator protection grade IP24 Mast & Lights Type of Lights Double-end metal halide LED Light’s fixture Oval Rectagle Luminous flux 162000 LM/light 39000 LM/light Number & power of lights 4x1500W 4x300W Number of mast sections 7 Mast extension Hydraulic Mast rotation Manually, max. 330° lockable Light bar tilt 12VDC Electric linear actuator Trailer Trailer suspension & axle with brakes Leaf springs & single axle with mechanical brakes Tow bar Retractable & adjustable supporting wheel tow bar Stabilizing legs & number 4 pcs extendable bar with manually retractable jacks 4 pcs hydraulic pivot legs 4 pcs extendable bar with manually retractable jacks 4 pcs hydraulic pivot legs Wheel’s rim size & tires 16" rim with regular tires 14" rim with regular tires Tow adapter 2" or 50 mm ball adapter Tail light Tail light kit Max towing speed 100km/h (62 mph) Additional Features Fuel tank Type Double wall sub-fueltank Fuel tank capacity 120 liters (31 US gallons) Operating hours with full fuel 56 hours Wires & electric components Regular Generator controller DSE 702AS Max. against wind 20 m/s (45 mph) Acoustic pressure 72dB(A) at 7 meters away Standard colour SWT orange trunk, black or galvanized all of the steel components Max. # of units loading in 40’ high container (Some components would be detached) 7

4HVL/P Basic Model 4HVL/P4000 Dimensions Length 3420mm (11’2’’) Width 2800 mm(9’2’’) Height 2460mm (8’1’’) Full extending height 8.84m (29’) Gross weight 1410kg (3110 lb) Engine Engine model D1105 (KUBOTA) Speed(rpm) 1500/1800 Number of cylinders 3 Engine characters 4 cycles,Watercooled diesel Combustion System E-TVS Engine aspiration Naturally aspirated Emission level Regular Alternator Standard configuration SPARKS Frequency(Hz) 50/60 Rating voltage (V,AC) 230/240-120 VAC Alternator insulation Class H Alternator protection grade IP23 Mast & Lights Type of Lights Regular metal halide Light’s fixture Rectagle(GEWISS) Luminous flux 110000 LM/light Number & power of lights 4x1000W Number of mast sections 7 Mast extension Hydraulic Mast rotation Manually, max. 330° lockable Light bar tilt 12VDC Electric linear actuator Trailer Trailer suspension & axle with brakes Leaf springs & single axle with mechanical brakes Tow bar Retractable & adjustable supporting wheel tow bar Stabilizing legs & number 4 pcs extendable bar with manually retractable jacks 4 pcs hydraulic pivot legs Wheel’s rim size & tires 16" rim with regular tires Tow adapter 2" or 50 mm ball adapter Tail light Tail light kit Max towing speed 100km/h (62 mph) Additional Features Fuel tank Type Double wall sub-fueltank Fuel tank capacity 120 liters (31 US gallons) Operating hours with full fuel 84 hours Wires & electric components Regular Generator controller DSE 702AS Max. against wind 20 m/s (45 mph) Acoustic pressure 72dB(A) at 7 meters away Standard colour SWT orange trunk, black or galvanized all of the steel components Max. # of units loading in 40’ high container (Some components would be detached) 7 Basic Model 4HVL/P6000 4HVL/P1200 Dimensions Length 3420mm (11’2’’) Width 2800 mm(9’2’’) Height 2460mm (8’1’’) Full extending height 8.84m (29’) Gross weight 1410kg (3110 lb) 1360kg (3000 lb) Engine Engine model D1105 (KUBOTA) Z482 (KUBOTA) Speed(rpm) 1500/1800 3000/3600 Number of cylinders 3 2 Engine characters 4 cycles,Watercooled diesel Combustion System E-TVS Engine aspiration Naturally aspirated Emission level Regular Alternator Standard configuration SPARKS Frequency(Hz) 50/60 Rating voltage (V,AC) 230/240-120 VAC Alternator insulation Class H Alternator protection grade IP24 Mast & Lights Type of Lights Double-end metal halide LED Light’s fixture Oval Rectagle Luminous flux 162000 LM/light 39000 LM/light Number & power of lights 4x1500W 4x300W Number of mast sections 7 Mast extension Hydraulic Mast rotation Manually, max. 330° lockable Light bar tilt 12VDC Electric linear actuator Trailer Trailer suspension & axle with brakes Leaf springs & single axle with mechanical brakes Tow bar Retractable & adjustable supporting wheel tow bar Stabilizing legs & number 4 pcs extendable bar with manually retractable jacks 4 pcs hydraulic pivot legs 4 pcs extendable bar with manually retractable jacks 4 pcs hydraulic pivot legs Wheel’s rim size & tires 16" rim with regular tires 14" rim with regular tires Tow adapter 2" or 50 mm ball adapter Tail light Tail light kit Max towing speed 100km/h (62 mph) Additional Features Fuel tank Type Double wall sub-fueltank Fuel tank capacity 120 liters (31 US gallons) Operating hours with full fuel 56 hours Wires & electric components Regular Generator controller DSE 702AS Max. against wind 20 m/s (45 mph) Acoustic pressure 72dB(A) at 7 meters away Standard colour SWT orange trunk, black or galvanized all of the steel components Max. # of units loading in 40’ high container (Some components would be detached) 7

4TN Basic Model 4TN6000 4TN1200 Dimensions Length 4360mm (14’4’’) Width 1430 mm(4’8’’) Height 1450mm (4’9’’) Full extending height 9m (29’6”) Gross weight 980kg (2160lb) 910kg (2010lb) Engine Engine model D1105 (KUBOTA) Z482(KUBOTA) Speed(rpm) 1500/1800 3000/3600 Number of cylinders 3 2 Engine characters 4 cycles,Watercooled diesel Combustion System E-TVCS Engine aspiration Naturally aspirated Emission level(50/60Hz) Regular Alternator Standard configuration SPARKS Frequency(Hz) 50/60 Rating voltage (50/60Hz) 230/240-120 VAC Alternator insulation Class H Alternator protection grade IP23 Mast & Lights Type of Lights Double-end metal halide LED Light’s fixture Oval Rectangle Luminous flux 165000 LM/light 390000 LM/light Number & power of lights 4x1500W 4x3000W Number of mast sections 3 Mast lifting Manually Mast extension Manually Mast rotation Manually,Max.330° lockable Light tilt Manually Trailer Trailer suspension & axle with brakes Leaf springs & single axle without brake Tow bar Retractable & adjustable supporting wheel tow bar Stabilizing legs & number 4 pcs extendable bar with manually retractable jacks Wheel’s rim size & tires 14" rim with regular tires Tow adapter 2" or 50 mm ball adapter Tail light Tail reflector Max towing speed 100km/h (62 mph) Additional Features Fuel tank Type Rotational moulding plastic Fuel tank capacity 170 liters (45 US gallons) Operating hours with full fuel 80 hours 360 hours Wires & electric components Regular Generator starting type or controler Key starting Max. against wind when fully extended 20 m/s (45 mph) Acoustic pressure 72dB(A) at 7 meters away Standard colour SWT orange or yellow canopy, black chasis, galvanized masts, tow bar & stabilizing legs Max. # of units loading in 40’ high container (Some components would be detached) 12 or 14 Basic Model 4TN4000 Dimensions Length 4360mm (14’4’’) Width 1430 mm(4’8’’) Height 1450mm (4’9’’) Full extending height 9m (29’6”) Gross weight 960kg (2115lb) 965kg (2125lb) Engine Engine model D1105 (KUBOTA) 380D(LD) Speed(rpm) 1500/1800 Number of cylinders 3 Engine characters 4 cycles,Watercooled diesel Combustion System E-TVS Direct injection Engine aspiration Naturally aspirated Emission level(50/60Hz) Regular Alternator Standard configuration SPARKS Frequency(Hz) 50/60 Rating voltage (50/60Hz) 230/240-120 VAC Alternator insulation Class H Alternator protection grade IP23 Mast & Lights Type of Lights Regular metal halide Light’s fixture Oval Luminous flux 110000 LM/light Number & power of lights 4x1000W Number of mast sections 3 Mast lifting Manually Mast extension Manually Mast rotation Manually,Max.330° lockable Light tilt Manually Trailer Trailer suspension & axle with brakes Leaf springs & single axle without brake Tow bar Retractable & adjustable supporting wheel tow bar Stabilizing legs & number 4 pcs extendable bar with manually retractable jacks Wheel’s rim size & tires 14" rim with regular tires Tow adapter 2" or 50 mm ball adapter Tail light Tail reflector Max towing speed 100km/h (62 mph) Additional Features Fuel tank Type Rotational moulding plastic Fuel tank capacity 170 liters (45 US gallons) Operating hours with full fuel 120 hours Wires & electric components Regular Generator starting type or controler Key starting Max. against wind when fully extended 20 m/s (45 mph) Acoustic pressure 72dB(A) at 7 meters away Standard colour SWT orange or yellow canopy, black chasis, galvanized masts, tow bar & stabilizing legs Max. # of units loading in 40’ high container (Some components would be detached) 12 or 14

Product Name 66-500KV XLPE Power Cable Construction Standard IEC 60840 rated voltage 30KV（Um=36KV）and above to 150KV（Um=170KV）extruding insulation power cable and accessories-test meathod and requirement IEC 62067 rated voltage 150KV（Um=170KV）and above to 500KV（Um=550KV）extruded insulation power cable and accessories-test meathod and requirement Operating Environment Max admissible temperature for conductor: 90℃ under normal running condition; 250℃ under short circuit ( max. duration is 5s ) Min bending radius is recommended to be 20 times of cable overall diameter. PVC sheathed cables shall not be installed in the environment temperature is below 0 ℃， and if it is below 0℃, the cable should be heated before installation Metal sheath Cable with corrugated aluminum sheath: places where there is not much corrosion but much requirement for mechanical strength ( e.g. direct connection to transformers, laying on bridges and in certical shafts ) Plastic Outer Sheath Cable with PVC outer sheath (type02) are suitable for the high voltage cable transmission line with general fireproof requirement and somewhat insulation requirement on the outer sheath. Cables with PE outer sheath (Type03) are suitable for high voltage transmission line directly buried underground with higher insulation requirement on the outer sheath; and if they are laid in tunnels or vertical shafts, anti-fire and flame-retardant measures must be taken.

Product Name PVC Insulated Cable (Wire) Reference Standard PVC Insulated Cable (Wire) is manufactured according to the standards of IEC 60227-2007 and JB/T8734-2012 or BS, DIN, and ICEA up on repuest. Applications PVC Insulated Cable (Wire) is suitable for power intallation, fix wiring or flexible connection for electrical appliances with related voltage of 450/750V and below. Operating Characteristics Rated Voltage U0/U: 450/750V, 300/500V and 300/300V Max permissible Continuous Operating temperature of the conductor. 60227 IEC 07 (BV-90) ------ 90℃ 60227 IEC 08 (BV-90) ------ 90℃ 60227 IEC 56 (BV-90) ------ 90℃ 60227 IEC 57 (BV-90)------ 90℃ For other types ------------- 70℃ The ambient temperature under installation shall not be below 0℃. The bending radius of cable: D ≤ 25mm ------------- ≥ 4D D ＞ 25mm ------------- ≥ 6D ( Diameter of the cable )

Product Name Rai Power Cable Rated Voltage up to and Including 10kV with Radiation Cross-linking Reference Standard The product is manufactured according to the standards of IEC60502-2:2014 or IEC, BS, DIN and ASTM upon request. Applications The product is suitable for indoors and ourdoors electric appliances with rated voltage up to and including 26/35kV.

Product Name Aerial Insulated Cable for rated voltage 1kv, 10kv, 20kv, and 35kv Reference Standard The product shall comply with the standards of ASTMB231 and GB 14049-2008 and ASTMB398. Applications The product fit for transmitting line and distributing line of rated voltage 1kv, 10kv 20kv and 25kv in tall buildings ,traveling development area and wooded tract. Operating Characteristics 1. The rated voltage of cables has four classes: 1kv, 10kv, 20kv, 35kv 2. Continuous permissible operating temperature: PVC insulation: 70℃ PE insulation: 70℃ HEPE insulation: 75℃ XLPE insulation: 90℃ 3. Max. Temperature of cable under short-circuit ( 5 sec. Max. Duration ) PVC Insulation: 160℃ PE Insulation: 130℃ HDPE Insulation: 150℃ XLPE Insulation: 250℃ 4. Laying temperature of cable not less than -20℃ 5. Operating ambient temperature of cables: -40℃~+40℃ 6. Permissible bending radius of cable： Cable for rated voltage up and including 0.6/1kv Bending radius not less than 4D for cable diameter ＜ 25mm Bending radius not less than 6D for cxable diameter ≥ 25mm Cable for rated voltage 10kv、20kv and 35kv Single-core cable bending radius not less than 20(D+d) Multi-core cable bending radius not less than 15(D+d) Note: D-over: all Diameter of cable; d-over: all Diameter of conductor.