Moving gantry beam adopts new structural design as well as new manufacturing process, aluminum alloy extrusion beam. Comparing with casting beam ,20% lower weight and 20% increased stiffness. Good stability at the high acceleration condition. CNC system written the human-computer interaction interface, adopt full chinese control software, operate simply and intuitively. The cutting area with three open sides is more wide vision. It is more freedom to load and unload which is suitable for different space layout. Electric control cabinet adopts separate structure applying to different space layout. Cutting chamber adopts the design of moving grid to endless cutting. It can locate by sliding grid freely to save cutting time. You can load sheet and located plate from both front and behind sides to more precision cutting. Dust-removal structure on base part adopts “attached” device. The dust-removal tuyere is very close to the below area of cutting parts. Which is more efficiency and avoids the laser cutting beam to ensure the life of the dust removal device. The laser cutting head by special designing can do high-efficient cutting for a special material thickness through deploying the optical parameters of the focus、the diameter of focus、light waist. Π-4020 machine with big cutting area has more strongly ability to cut small plate, which can load metal sheet from front and behind by turns to save time. Laser source Germany famous IPG Laser source is with high performance, long stability. More than 100000 hours work-life of pumped diode Wide range of operating wavelengths, single-mode and multi-mode options Switzerland RAYTOOLS Laser Head It is light-weight and robust cutting head The focus adjustment is performed manually by capacitive distance sensor. The cutting lens and collimation lens is protected with a transparent window to avoid any back-spatter. Laser source Switzerland RAYTOOLS Laser Head Suction unit With improved suction system for fumes and smokes, scrap pieces and heavy dust fall through the cutting tables into separate boxes that can easily be taken away from the side of the machine. Application: Available for cutting such metal sheet as stainless steel, carbon steel, copper, brass, alloy steel, aluminum, gold, silver, titanium and so on. Widely used in the sheet metal processing, shipbuilding, automobile, rail transportation, agriculture machinery, advertising board ,kitchen utensils, machinery, elevator and so on.

Equipped with six-axis controlling technology and special cantilever flying optics, and also aluminum alloy structure The laser keeps still to avoid any damage to the laser in certain cutting area German gear and rack, precision ball screw, linear guide allow high precision and little noise Excellent dust removing system and scrap collecting device improve the processing environment greatly. The cutting head is a drawer-like type offering the possibility of mounting two different focus lengths, allowing very easy removing, changing and cleaning of the cutting lens, reducing the machine’s down time, whenever the lens needs to be checked. Advanced beam controlling technology. Wherever the cutting head moves, the beam diameter keeps the same, which ensures stable cutting Equipped with axis control of laser, and fast moving function, thus the moving speed of X1 axis can reach 40m/min. Big table cutting With big table cutting area and high speed No limited to the sheet material size Any big size can be customized flexibly Laser source Germany famous IPG Laser source is with high performance, long stability. More than 100000 hours work-life of pumped diode Wide range of operating wavelengths, single-mode and multi-mode options Suction unit With improved suction system for fumes and smokes, scrap pieces and heavy dust fall through the cutting tables into separate boxes that can easily be taken away from the side of the machine. Big table cutting Laser source Suction unit Application: Available for cutting such metal sheet as stainless steel, carbon steel, copper, brass, alloy steel, aluminum, gold, silver, titanium and so on. Widely used in the sheet metal processing, shipbuilding, automobile, rail transportation, agriculture machinery, advertising board ,kitchen utensils, machinery, elevator and so on.

Specialized anti-collision laser cutting head designed by Lead Laser ensures fast speed and high precision processing. Considerate design of dust removing system with different cavities, and huge wind channel improves the working condition Automatic tube champing system improve the cutting efficiency Tube motion system is an integrated design with the main machine for sheet; this design ensures the high precision and fast speed of tube processing. The tube cutting system is easy to move, which makes it convenient to load and unload sheet metal Tube combine with sheet This machine is integrated with the tube and sheet cutting design for one machine. ; The tube cutting part system is flexible to move, for the convenience of loading and unloading sheet required. CNC system With powerful CNC, precision control of the laser cutting performance is guaranteed. Fast processing of all tasks and introduces virtually no dead-times in the production. Tube combine with sheet CNC system Movement and rotation axis The movement axis driven by servo motor to feed linear direction Two rotation axis driven by servo motor is for the rotation movement The rotation angle for the longer tube controlled in precision is guaranteed. Cypcut system Cyp Cut software for nesting and programming, easy for operation Movement and rotation axis Cypcut system Application: Available for cutting such metal sheet as stainless steel, carbon steel, copper, brass, alloy steel, aluminum, gold, silver, titanium and so on. Widely used in the sheet metal processing, shipbuilding, automobile, rail transportation, agriculture machinery, advertising board ,kitchen utensils, machinery, elevator and so on.

Gantry type, double drive, people can get very close to the machine High-speed programmable focus-adjusting piercing mode Smart piercing system Fast cutting of thin sheet Edge-sharing cutting function, improve the material utlilzation and cutting efficiency Technique database, friendly human-machine interface, easy to operate Effective cutting of aluminum, brass and other high reflective material High photoelectric conversion rate, no consumption of gas, low cost with small size 15”touch controlling system, easy to operate Automatic exchanging table Aluminum Bridge Compared to traditional bridge, the light-weight aluminum bridge is 3 meters length，1.5 m span of working range. The operator can handle the problem quickly without entering the inside of the machine because of three-meter side opening. Cutting gas system Up to three types of assist gasses can be connected. Automatic gas selection valve will supply the right gas for each application. Extreme fast cutting gas supply system guarantees stable laser processing. Aluminum Bridge Cutting gas system Suction unit With improved suction system for fumes and smokes, scrap pieces and heavy dust fall through the cutting tables into separate boxes that can easily be taken away from the side of the machine. Laser source Germany famous IPG Laser source is with high performance, long stability. More than 100000 hours work-life of pumped diode Wide range of operating wavelengths, single-mode and multi-mode options Suction unit Laser source Application: Available for cutting such metal sheet as stainless steel, carbon steel, copper, brass, alloy steel, aluminum, gold, silver, titanium and so on. Widely used in the sheet metal processing, shipbuilding, automobile, rail transportation, agriculture machinery, advertising board ,kitchen utensils, machinery, elevator and so on.

The machine has a robust and rigid design that guarantees repeatable high precision cutting results Both the working tables move in and out of the machine simultaneously, decreasing dramatically the time of the table change cycle and increasing the productivity of the machine. New sheets get faster in and cut sheets get faster out of the machine. The machine features a completely closed cabin and offers safe and ergonomic operation. The large eye-safe windows allow an optimal overview of the entire working area of the machine. The light-weight aluminum bridge assures accurate cutting results even under high-dynamic axis movements. A long vertical stroke of the cutting head gives additional freedom in the cutting application: pre-formed sheets, tubes, profiles, etc. can easily be put on the cutting table and are in reach of the cutting head. The machine lay-out is symmetric when it comes to the maintenance access from the sides: either side can be put close to a wall while having all the necessary reach to maintenance points on the opposite side. Laser source Germany famous IPG Laser source is with high performance, long stability. More than 100000 hours work-life of pumped diode Wide range of operating wavelengths, single-mode and multi-mode options Cutting Head Manual or Auto-focus is for your option, the manual auto –focus head equipped for fiber-delivered laser sources of maximum 2kW output power. More than high power higher power lasers (>2kW), the fully automatic focus cutting head is recommended. Laser source Cutting Head Shuttle table Full-automatic and completely integrated with the safety light curtain system to protect the operator The cycle time is extremely fast because the tables are not moving vertically at any time. The cutting tables come into the machine at different heights, well within reach of the long Z-axis stroke. Suction unit With improved suction system for fumes and smokes, scrap pieces and heavy dust fall through the cutting tables into separate boxes that can easily be taken away from the side of the machine. Shuttle table Suction unit Application: Available for cutting such metal sheet as stainless steel, carbon steel, copper, brass, alloy steel, aluminum, gold, silver, titanium and so on. Widely used in the sheet metal processing, shipbuilding, automobile, rail transportation, agriculture machinery, advertising board ,kitchen utensils, machinery, elevator and so on.

Self-centering feeding chuck, capable of round, square, rectangle and other kind of profiles’ clamping. And clamping force can be adjusted manually or automatic. Self-adjusting assisting chuck, the chuck could adjust itself according to the part program, so it perfectly fits the requirement of small batch production, for mass production just need one time adjustment. Position reconfigurable assisting chuck, under different cutting status, the program can auto configure the position of the assisting chuck, to minimize the residual length of the material to save custom cost. Material auto-alignment, auto aligning the material to the machine axis, avoid manual loading, which guarantee the safe operation and avoid collision between chuck and material. Real-time material supporting, CNC controlled material supporting axis will follow the contour of profile in real-time, to improve the machine accuracy, and can automated retract to avoid collision. Fully enveloped cutting zone with big fiber laser proofed watching window to guarantee the safety of the operator. Auto lubrication, equipped with auto-lubrication system to simplify ordinary maintenance procedure. Chuck system Self-centering feeding chuck, is capable for round, square, rectangle and other kind of profiles’ clamping automatically and the clamping force can be adjusted. Auto-focus Cutting Head The focus adjustment is motorized by an integrated capacitive distance sensor. Even with irregular tubes, the laser cutting process parameters will be kept constant during the entire production. CNC control A powerful CNC lies at the heart of the Lead Laser tube laser cutting performance. All important laser components are integrated in one single closed-loop control system mastering every single aspect of the laser cutting process at a microsecond-level cycle-time. Chuck system Auto-focus Cutting Head CNC control Application: All tubes such as rectangular, round tube and so on available for cutting such metal sheet as stainless steel, carbon steel, copper, brass, alloy steel, aluminum, gold, silver, titanium and so on. Widely used in the sheet metal processing, shipbuilding, automobile, rail transportation, agriculture machinery, advertising board ,kitchen utensils, machinery, elevator and so on.

Excalibur 4020 Laser Cutting is an all-purpose gantry type flying optics laser cutting machine. Shuttle table in the front of the machine close to the operator access to the cutting head for full overview in production CNC control with virtually unlimited program memory 23" touch screen operator panel with Lead Laser Suite graphical user interface 23" monitor with 4 cameras inside the working area CE certified safety light curtain around the shuttle table Automatic cutting head height sensor system with capacitive distance sensor On-board data base with cutting and piercing parameters for all materials and thickness On-line correction of cutting and piercing parameters during processing Lead Laser Suite This windows based on software platform for laser cutting machines offering a modern graphical user interface for all the laser machine's functions and features, where the operator can manage manipulate in an intuitive way the laser cutting jobs and programs. Database Manager The parameters of all cutting and piercing technologies for every material and thickness are present on-board and can be managed in this dedicated page. Default values for all common applications are stored for reference in the Lead Laser database. Lead Laser Suite Database Manager Low inertia motors Integrated gears and high-precision rack and pinions High-performance dynamics Motion digital servo drives for X-axis gantry, Y- and Z-axis Procutter cutting head Auto-focus cutting head for fiber-delivered laser source Internal sensors detect possible problems before result in bad processing Automatic cutting head height sensor system with capacitive distance sensor Equipped with fast auto-focus axis to adjust the focus point dynamically. Excellent surface quality Low inertia motors Procutter cutting head Shuttle table Perfect level lifting of 2 cutting tables with 1800kg of material each The shuttle table in the front of the machine close to the operator access to the cutting head, with full overview of all the steps in the production Suction unit With improved suction system for fumes and smokes, scrap pieces and heavy dust fall through the cutting tables into separate boxes that can easily be taken away from the side of the machine. Shuttle table Suction unit Application: Available for cutting such metal sheet as stainless steel, carbon steel, copper, brass, alloy steel, aluminum, gold, silver, titanium and so on. Widely used in the sheet metal processing, shipbuilding, automobile, rail transportation, agriculture machinery, advertising board ,kitchen utensils, machinery, elevator and so on.

The machine can do stick welding of stainless thin board and thick carbon steel board； can also use gantry, double drive, and hanging structure; can load and unload from four directions, good human and machine accessibility; can put 3D spare parts longer than 4 meters and wider than 2 meters; can equipped with large frock clamp; 3D cutting head can move in different directions, which provides a great foundation for wide application Flexible to add welding, melts duplicate, tube processing function and so on Equipped with high rigidity aluminum alloy beam（Y axis） which is so light that the dynamic performance is great The central lubrication system, controlled by CNC, lubricates the machine automatically. This guarantees the precision and the life of the transmission parts. European Kuka CNC System, which is reliable and suitable for 3D parts processing 3D cutting With good flexible cutting area in all direction The structure is widly applied in the machine tool processing Laser source Germany famous IPG Laser source is with high performance, long stability. More than 100000 hours work-life of pumped diode Wide range of operating wavelengths, single-mode and multi-mode options Suction unit With improved suction system for fumes and smokes, scrap pieces and heavy dust fall through the cutting tables into separate boxes that can easily be taken away from the side of the machine. 3D cutting Laser source Suction unit Application: Available for cutting such metal sheet as stainless steel, carbon steel, copper, brass, alloy steel, aluminum, gold, silver, titanium and so on. Widely used in the sheet metal processing, shipbuilding, automobile, rail transportation, agriculture machinery, advertising board ,kitchen utensils, machinery, elevator and so on.