• Non-ferrous metal separators are designed to use conductors to generate eddy currents in high-frequency, alternating-frequency magnetic fields, and to  automatically separate non-ferrous metals (aluminum, copper, zinc, etc.) from non-conductive materials.

• The magnetic conveyors are used for conveying steel or ferromagnetic products at slope up or slope down or vertical  direction.Comparing the traditional conveyor system, The magnetic conveyor system need less space, less labor and cost. • The magnetic conveyor system will be designed according to the shape of transported object, the belt type, the belt  speed of conveyor system and the environmental conditions in which the conveyor will operate .

• The Strongest Magnetic Roll Separators---high purity non-step separation for weakly magnetic materials. • The Strongest Magnetic Roll Separators employ high intensity,high gradient and trajectory deflectionto provide an  alternative in handling a wide variety of materials which do not respond well to traditional methods such as magnetic  drum separators or grate magnets.Induced by powerful high gradient circuits, the weakly magnetic particles present  different parabolic trajectory from non-magnetic particles.The difference becomes separation criteria.Magnetic Roll  Separators are capable of purification or concentration of weakly magnetic materials automatically and continuously.

The suspended Magnetic Separator is suitable for the continuous of ferromagnetic (Fe) particles --- such as iron or steel - from material streams containing a relatively large amount of Fe. The suspended magnetic separator is positioned over moving conveyor belts or in a chute for the purpose of removing ferrous contaminants from bulk product flows, protecting downstream equipment and improve products purity.

The rotary type magnetic separator is composed of a ring-shaped magnetic grid, a stainless steel case and a geared motor. The rotary type magnetic separator drives the ring-shaped magnetic grid to rotate by the gear motor, thereby effectively preventing the material from bridging when flowing through the rotatory magnetic separator. Blockage and the like occur to efficiently remove iron impurities in the loose agglomerated material. Rotary type magnetic separator is mainly used for sorting fine iron impurities in powder materials with relatively poor fluidity and easy to accumulate. These materials are more likely to be blocked or piled up by using traditional magnetic grid or drawer type magnetic separator. Widely used in food, food additives, pharmaceuticals, fine chemicals, lithium battery positive and negative materials, pigments, carbon black, flame retardants and other industrial production lines.

Mechanical Vapor Recompression Evaporator ( MVR Evaporation system) MVR Working principles MVR applied mechanical vapor recompression unit for compressing the secondary vapor so that recycle the secondary vapor completely in a closed-loop circulation system. As a result of the vapor compressor, temperature and pressure of the secondary vapor raised, the heat efficiency boosted. The effectiveness of live steam is equal to 30 effects of multiple effect evaporator. Thus reducing the demand for external live vapor and cooling resources, energy conservation and less pollution attained. Application Range Evaporator, separator, condenser, vacuum and discharging system, delivery pump, groundwork, PLC, electrical appliance and instruments, valves, pipelines etc. Features MVR energy conserving evaporator is the advanced evaporation technology in nowadays. It only consumes a few vapors in the first two hours of the evaporator operation, almost no vapor consumption after then. As a compressor provided with thermal energy, compared with the traditional evaporator, MVR evaporator got a low temperature-trip, which is good for feeding material quality and avoiding scale forming. Not required a condenser or required a very small condenser CIP cleaning system Evaporation temperature: 50-100 C, less effect on feeding material nature Energy consumption: Evaporating 1-ton water shall consume 15-27 degree power, while the material with low boiling point, the consumption shall be below 20 degrees.  About the energy consumption depends on local vapor and power cost. We suppose the vapor supply cost 180 RMB/T, electricity supply cost 0.7 RMB per degree. Evaporating one-ton water will conserve 0.23*180-20*0.7=27.4 RMB. If you evaporating 100Tons, the evaporator is supposed to run 330 days every year, 24hours per day, MVR will save 27.4*100*24*330=21700800 RMB. The energy conservation efficiency is 60% more than five-effect evaporator. Evaporator selection notice compared with electricity and vapor supply cost ahead of time. MVR invest more than multi-effect evaporator at the early stage, but the cost shall be covered after 300days service.

Titanium M VR Evaporator  Application Range Evaporator, separator (crystallizer), condenser, vacuum and discharging system, delivery pump, PLC, electrical appliance and instruments, valves, pipelines etc. MVR evaporator technology MVR applied mechanical vapor recompression unit for compressing the secondary vapor so that recycle the secondary vapor completely in a closed-loop circulation system. As a result of the vapor compressor, temperature and pressure of the secondary vapor raised, the heat efficiency boosted. The effectiveness of live steam is equal to 30 effects of multiple effect evaporator. Thus reducing the demand for external live vapor and cooling resources, energy conservation and less pollution attained. Evaporator performance

Cabinet Ventilation, LK series UL94V-0 plastic Filter Fan for panel Linkwell LK33 series fan and filter are designed for the cooling and ventilation of cabinet enclosures. The filter fans are quick and easy to fix (Either click fixing or screw mounting), to form a seal upto IP54 filter fan. The long life expectancy , quiet operation,ultra-thin louvre filter and low maintenance design makes them almost “fit and forget”. For more harsh condition replacement filter mats are available. With multiple voltages for ac dc axial fans, different air flow volume and dimensions, economic types, Linkwell Electric are China leading manufacturer and exporter of filter fans. LK3321 CODE M.U Exit Filter Fan and Filter Fan and Filter Fan and Filter TYPE V-ph-Hz LK3321.300 LK3321.230 LKK3321.115 LK3321.024 Voltage/phase/frequency 220-240/1/50-60 110-120/1/50-60 24DC Height/Width/Depth mm 116.5×116.5 116.5×116.5×54 116.5×116.5×54 116.5×116.5×54 Power/Current W/A 18/14/0.07-0.08 18/14/0.13-0.15 4.3W/0.18A Temperature Limits ℃ -10/+70 -10/+70 -10/+70 Protection Degree IP 54 54 54 54 Noise Level dB(A) 37/41 37/41 37/41 Air Flow m3/h 25/35 25/35 25/35 Air Flow(+LK3321.300) m3/h 20/25 20/25 20/25 Air Flow Direction A/P A/P A/P

Detailed informations(Products): 1. Low pressure drop; 2. Superior dust-holding capacity; 3. High Airflow Volume; 4. Sturdy construction. Structures: Item Material(Standard) Frame ABS/PS plastic,aluminum sheet,galvanized steel sheet Filter Media Glass fiber,synthetic fiber Separator Hot melt Sealant Polyurethane Gasket EVA,EPDM,Neoprene,CR Face Guard Aluminum mesh,Galvanised mesh Temperature Limit 70℃ Humidity Limit 100%RH Application: Widely used in central air conditioning, gas turbine power plants, oxygen plants, steel mill blast oxygen station, furnace blast air station, power plant ,gas turbine air intake applications. Also, we warmly welcome: -- Famous brand to do OEM; -- End users or agents to find replacements here; -- Dust collector manufacturers to do customization.

Detailed informations(Products): 1. Large air flow; 2. Lower resistance; 3. High dust-holding capacity; 4. Sturdy construction; 5. Washable,cost-effective. Materials: Item Material(Standard) Outer Frame Aluminum/galvanized steel sheet Filter Media Synthetic fiber/Glass fiber Efficiency G3-F8(EN779:2011) Comprehensive advantages(Company): 1. The biggest manufacturer of filters in China; 2. H&V`s biggest customer in China; 3. Our vast experience and a state-of-the-art laboratory enable us to provide customization; 4. Welcome you to our factory and you will be convinced by our advanced workmanship and big scale. Application: Widely used in central air conditioning, gas turbine air intake, oxygen plants, steel mill blast oxygen station, furnace blast air station, power plant , automobile, hotel and office buildings. Also, we warmly welcome: -- Famous brand to do OEM; -- End users or agents to find replacements here; -- Dust collector manufacturers to do customization.

Features: Panel pre-filters are  widely used for primary filtration. 1. Superior dust-loading capacity; 2. Low pressure drop for low cost; 3. Large air flow Structure: Item Material(Standard) Material(Alternative) Filter Media Synthetic fiber/Glassfiber/Cotton/Non-woven fabrics Frame Cardboard Aluminum/Galvanized Protect Mesh Aluminum net Stainless Steel net Filtration Efficiency G2,G3,G4 Average Arrestance 85%-96%@5micron Initial Resistance 30-50Pa Final Resistance 200-250Pa Temperature Limit 100℃ Color Blue or white Application: Pleated Pre-Fitlers widely applied in gas turbine air inlet housing, air conditioning and ventilating system as a prefilter before medium filters and HEPA filters.