EMT
ELECTRIC METALLIC TUBING (UL797-ANSI 80.3)
Nominal Diameter
Outside Diameter
Wall Thickness
Length
Weight
Inch
Inch
mm
Inch
mm
FT
mm
KG/PC
1/2’’
0.706
17.93
0.042
1.07
10
3050
1.357
3/4’’
0.922
23.42
0.049
1.24
10
3050
2.069
1’’
1.163
29.54
0.057
1.45
10
3050
3.063
1-1/4’’
1.51
38.35
0.065
1.65
10
3050
4.555
1-1/2’’
1.74
44.2
0.065
1.65
10
3050
5.281
2’’
2.197
55.8
0.065
1.65
10
3050
6.720
2-1/2’’
2.875
73.03
0.072
1.83
10
3050
9.800
3’’
3.5
88.9
0.072
1.83
10
3050
11.984
3-1/2’’
4
101.6
0.083
2.11
10
3050
15.988
4’’
4.5
114.3
0.083
2.11
10
3050
17.804
Notes: Applicable tolerance
Length: 10FT ±1/4in. 3050mm ±6.35mm.
Outside Diameter: 1/2" to 2" ±0.005in.(16mm to 53mm ±0.13mm).
2-1/2" ±0.010in. (63mm ±0.25mm). 3" ±0.015in. (78 ±0.38mm). 3-1/2" to 4" ±0.020in. (91mm to 103mm ±0.51mm)
Standard:
Electrical metallic tubing (EMT), also commonly called thin-wall, is a listed steel raceway of circular cross section. EMT itself is not threaded, but can be used with threaded fittings that clamp to it. The nominally 10” and 20” lengths are also available. Covered by Article 358 of the NEC, EMT is available in trade sizes 1/2” through 4”. The outside is galvanized for corrosion protection and the inside has an approved corrosion-resistant organic coating.