Inconel 713C/UNS N07713 sheet/bar/pipe
quivalent designations
UNS N07713
Inconel 713C Round Bar
We Manufacture and Sell Inconel 713C Round Bar. by Investment Casting,Bar Diameter form 6.0mm-300mm.More Detail information,Please contact us!
Inconel 713C is a nickel-chromium alloy that is ideally suited for jet engine gas turbine blades.Inconel 713C offers outstanding resistance to thermal fatigue and good castability while offering exceptional rupture strength at 1700°F (927°C).
Inconel 713C Round Bar Chemical Compositons:
Alloy
%
Ni
Cr
Fe
Mn
Si
Mo
Zr
Ti
Cu
Co
Al
C
S
713C
Min.
Bal
12.0
-
-
-
3.8
0.05
0.5
-
1.8
5.5
-
-
Max.
14.0
2.5
0.25
0.5
5.2
0.15
1.0
0.5
2.8
6.5
0.20
0.015
Inconl 713C Round Bar Physical properties
Density
7.913 g/cm³
Melting point
1260℃-1288℃
Inconel 713C Products Mechinabity Physical
●High-speed tungsten-cobalt or molybdenum-tungsten-vanadium toolsCutting lubricants:
Chlorinated, sulfurized fatty mineral oil
Rich emulsion of 10 parts water and 1 part soluble oil
Aluminum oxide
Vitrified bond of medium or soft hardness and medium open structure
Use 1 pound of sal soda with 25 gallons of water, or chemically active grinding coolant
Inconel 713C Weledablity
1、Inconel 713C can be used in applications using very low restraint
2、Use Inco-Weld A electrode
3、Flash-butt weld
4、Inconel 713C is also good for hydrogen-atmosphere brazing with normal high-heat brazing alloy with electroplated mating surfaces
Inconel 713C Applications
Inconel 713C is most commonly used for jet engine gas turbine blades.