Type W（mm) H(mm) Thickness(mm) L(mm) XK4121PS 41 21 2.0 3000 XK4141PS 41 41 2.0 3000 XK4162PS 41 62 2.5 3000 XK4172PS 41 72 2.5 3000 XK4182PS 41 82 2.5 3000 Note:Other Thickness and Length available Material & Finish Pre-Galvanized / PG / GI – for indoor use to AS1397 Hot Dip Galvanized / HDG – for outdoor use to BS EN ISO 1461 Powder-coated/PC-Protect items from oxidizing and damaging Stainless Steel SS201/SS304 / SS316 Mill / Mild /Plain Steel to ISO 4995 A zinc coating can be economically applied to steel sheet immediately after its manufacture;the result, pre-galvanized steel(to BS EN 10346) can be an attractive, bright material which is suitable for non-arduous environments. Prep-galvanized(or mill galvanized) steel is produced by unwinding steel coil and passing it continuously through a bath of molten zinc and then past air jets to remove excess zinc from the surface.The process is closely controlled to produce a thin, even and ripple free zinc coating with very few imperfections. Because this pre-galvanized steel coil must then be cut to shape during subsequent manufacture of support equipment, the edges of the finished components will have no zinc coating. This aspect, together with the relatively light zinc coating provided by the process, make pre-galvanized service supports suitable for indoor, low-corrosive environments(particularly where an aesthetically attractive appearance is important) but unsuitable for humid indoor or outdoor applications. XK strut channel use all the good quality pre-galvanized steel coil as Q195 , all the coil and plate we will check the galvanized thickness to meet clients different order.