Feature: The filling temperature of carbonated drink is 0-4 celcius degree, and the environment temperature is 20-30 degree, so the filled bottles will be full of water drops if they are not warmed, so the bottle warming machine warms the bottles by spraying warm water from the nozzles to the outside walls of bottles to keep the bottles warm and away from water drops, and make it convenient for labeling and printing. The chain plate apply anti-friction and high temperature resistance engineering plastic. Apply advanced PLC controller to assure all action precision. The conveyor is frequency controlled. All spray tubes are made of stainless steel and spray evenly. All spray nozzles are made of engineering plastic. The catchment flume is made of stainless steel and equipped with a level alarm device. The spray-cooling tunnel has a spray cooling recycling water pump. • The tunnel have strong legs. • The tunnel is sealed. Only both of sides door can be opened. The whole machine is SUS304 material, there is no plating on surface • There is a water tank, and the water tank will be connected with water pump. So pump will offer water and clean. • Yeah, the Water tank will offer water. • The side covers are easily to remove, so you can check, inspect and clean the tunnel anytime. • We will offer the conveyor for tunnel, and the conveyor has motor . • The transformer of frequency will control the conveyor. • Yeah, steam heating is better than the electric heating. It is faster. • The heat exchanger system • The system, and thermal water heating is carried out by means of electronic controls, steam valves and steam registers. • There are the filters for water circulation pumps. And we will install the separate filter for the water pipes. • The machine is automatic machine. We will install the solenoid valve for the machine. So it will adjust temperature, speed automatically. • We will install the light alarm system. If the machine have emergency situation, the light will twinkling. • Electrical control cabinet with signaling elements, button control, an electronic temperature registrar, has a degree of protection IP-54. • The pasteurizer is made of stainless steel AISI 304. • In the input and the output of the pasteurizer, emergency stop buttons are provided. • The normal position of all taps is closed.