304L stainless steel beam
304L stainless steel beam
Introduction
304L stainless steel is a kind of general low carbon stainless steel, it is widely used to make for a good comprehensive performance, corrosion resistance ,form-ability of equipment and parts.
It has corrosion resistance and good heat resistance, low temperature resistance and good mechanical properties. No heat treatment hardening phenomenon (non-magnetic, using temperature to -196 ℃ ~ 800 ℃).
Applied to the grain boundary corrosion resistant requirements of high chemical industry, coal, oil field open machine, building materials with heat-resistant parts and heat treatment which are difficult parts.
Technical Parameter
Application
Applicable scope(Steel Beam):
Due to the cross section dimensions are relatively high, narrow, and therefore, the moment of inertia of the cross section of two sleeves are different, which makes its application scope has a lot of limitations. I used should be selected according to design drawings requirements.
304L stainless steel is a kind of general low carbon stainless steel, it is widely used to make for a good comprehensive performance, corrosion resistance ,form-ability of equipment and parts.
It has corrosion resistance and good heat resistance, low temperature resistance and good mechanical properties. No heat treatment hardening phenomenon (non-magnetic, using temperature to -196 ℃ ~ 800 ℃).
Applied to the grain boundary corrosion resistant requirements of high chemical industry, coal, oil field open machine, building materials with heat-resistant parts and heat treatment which are difficult parts.
Technical Parameter
| 304L stainless steel | |||||||
|---|---|---|---|---|---|---|---|
| Standard | Grade |
Chemical Composition % |
Temper |
Yied strength Mpa |
Tensile strength Mpa |
Elongation % | Hardness |
| GB | 00Cr19Ni10 |
C≤0.030，Mn≤2.00， Si≤1.00，P≤0.045， S≤0.030，Cr 18.0~20.0, Ni 8~12 |
Annealed, hot rolled/ cold rolled |
≥170 | ≥480 | ≥40 | HV≤200 |
| USA | 304L | ||||||
| JIS | SUS304L | ||||||
| German | 1.4306 | ||||||
| Item | Grade | Height*Width*Thickness (mm) | weight(kg) |
| SS Beam | 10 | 100*68*4.5 | 11.261 |
| SS Beam | 12 | 120*74*5 | 13.987 |
| SS Beam | 14 | 140*88*6 | 20.513 |
| SS Beam | 18 | 180*94*6.5 | 24.143 |
| SS Beam | 20a | 200*100*7 | 27.929 |
| SS Beam | 20b | 200*102*9 | 31.069 |
| SS Beam | 22a | 220*110*7.5 | 33.07 |
| SS Beam | 22b | 220*112*9.5 | 38.105 |
| SS Beam | 25b | 250*118*10 | 42.03 |
| SS Beam | 28a | 280*122*8.5 | 43.492 |
| SS Beam | 28b | 280*124*10.5 | 47.888 |
| SS Beam | 30a | 300*126*9 | 48.084 |
| SS Beam | 30b | 300*128*11 | 52.794 |
| SS Beam | 30c | 300*130*13 | 52.717 |
| SS Beam | 32b | 320*132*11.5 | 57.741 |
| SS Beam | 32c | 320*134*13.5 | 62.765 |
| SS Beam | 36a | 360*136*10 | 60.037 |
| SS Beam | 36b | 360*138*12 | 65.689 |
| SS Beam | 36c | 360*140*14 | 71.341 |
| SS Beam | 40a | 400*142*10.5 | 67.598 |
| SS Beam | 40b | 400*144*12.5 | 73.878 |
| SS Beam | 40c | 400*146*14.5 | 80.158 |
| SS Beam | 45a | 450*150*11.5 | 80.42 |
| SS Beam | 45b | 450*152*13.5 | 87.485 |
| SS Beam | 45c | 450*154*15.5 | 94.55 |
| SS Beam | 56a | 560*166*12.5 | 106.316 |
| SS Beam | 56b | 560*168*14.5 | 115.108 |
| SS Beam | 56c | 560*170*16.5 | 123.9 |
| SS Beam | 63a | 630*176*13 | 121.407 |
| SS Beam | 63b | 630*178*15 | 131.298 |
| SS Beam | 63c | 630*180*17 | 141.189 |
Application
Applicable scope(Steel Beam):
Due to the cross section dimensions are relatively high, narrow, and therefore, the moment of inertia of the cross section of two sleeves are different, which makes its application scope has a lot of limitations. I used should be selected according to design drawings requirements.
TOP
Mobile phone quick desktop
Supplier portal Website:www.x-cloud.com/supplier
© 1999-2015 x-cloud.com. All rights reserved. 沪ICP备12049434号-2