410 Stainless Steel Sheet/Plate

Wuxi Sino Yuan Science and Technology co.,ltd

Home > Products > Stainless Steel Sheet/Plate > 410 Stainless Steel Sheet/Plate

Introduction

SS410 is a martensitic stainless steel that provides good corrosion resistance plus high strength and hardness.It is magnetic in both the annealed and hardened conditions.A wide range of properties can be developed with different heat treatments.
Applications requirring moderate corrosion resistance and high mechanical properties are ideal for this alloy.Typical uses include flat springs,knives,kitchen utensils and hand tools.

Grade	410 stainless steel sheet
Thickness	0.3-6mm
Widthness	1000mm, 1219mm, 1524mm or as customized
Length	2438mm, 3048mm, 6096mm or as customized
Brand name	TISCO,BAO Steel,ZPSS,BAO XIN,LISCO..
Standard	JIS, AISI, ASTM, GB, DIN, EN ,etc.
Finish	2B, Hairline, No.4, BA, 8K mirror, etc.
Certification	SGS
Packaging	Standard exporting packing; seaworthy package.
MOQ	2 Tons

Realted Products:

Stainless steel wire rod,stainless steel pipe/tube,stainless steel flat bar,stainless steel angel bar...

Corrosion Resistance:
SS410 provides good corrosion resistance to air,water and some chemicals.It shows satisfactory resistance to nitric acid,concentrated sulfuric acid,concentrated sulfuric acid,dilute acetic acid and naptha.Resistance to food acids is good.

Annealing:
Annealing is achieved by heating to above 816℃ and 899℃for 90 minutes per 25mm thickness followed by air quenching.Controlled atmospheres are recommended in order to avoid excessive oxidation of the surface.

Welding:
The martensitic class of stainless steeks has limited weldability due to its hardnability.Special consideration is required to avoid cold cracking by preheating to 260℃.Post-weld heat treatment should be considered to achieve required properties.This particular alloy is generally considered to have the best weldability of this stainless class.

Specification

Chemical Composition and mechanical properties:

410	C	Si		Mn	P		S	Cr
	≤0.15	≤1.00		≤1.00	≤0.04		≤0.03	11.50~13.50
tensile strength σb (MPa)			yield strength σ0.2(MPa)			elongation δ5(%)			Hardness HB
≥440			≥205			≥20			≤210

tolerance range of 410 cold rolled stainless steel sheet/plate
Thickness	Large Tolerance	Normal Tolerance	Small Tolerance	No Tolerance
0.4MM	0.3-0.32	0.33-0.37	0.37-0.39	≥0.39
0.5MM	0.4-0.42	0.43-0.47	0.47-0.49	≥0.49
0.6MM	0.5-0.52	0.53-0.56	0.57-0.59	≥0.59
0.7MM	0.6-0.62	0.63-0.67	0.67-0.69	≥0.69
0.8MM	0.7-0.72	0.73-0.77	0.74-0.79	≥0.79
0.9MM	0.8-0.82	0.83-0.87	0.87-0.89	≥0.89
1.0MM	0.89-0.9	0.91-0.94	0.94-0.99	≥0.99
1.2MM	1.02-1.08	1.09-1.15	1.16-1.18	≥1.18
1.5MM	1.32-1.38	1.39-1.45	1.46-1.48	≥1.48
2.0MM	1.72-1.79	1.8-1.86	1.87-1.9	≥1.9
2.5MM	2.23-2.36	2.32-2.42	2.42-2.47	≥2.48
3.0MM	2.7-2.77	2.78-2.85	2.85-2.9	≥2.9

tolerance range of 410 hot rolled stainless steel sheet/plate
Thickness	Large Tolerance	Normal Tolerance	Small Tolerance	No Tolerance
3.0MM	2.6-2.75	2.75-2.85	2.86-2.9	≥2.9
4.0MM	3.5-3.6	3.6-3.75	3.76-3.95	≥3.95
5.0MM	4.5-4.6	4.6-4.75	4.75-4.95	≥4.95
6.0MM	5.4-5.6	5.6-5.75	5.75-5.85	≥5.85
8.0MM	7.3-7.5	7.5-7.65	7.65-7.85	≥7.85
10.0MM	9.2-9.3	9.3-9.6	9.6-9.85	≥9.85
12.0MM	11.1-11.2	11.2-11.6	11.6-11.85	≥11.85
14.0MM	13.1-13.2	13.2-13.6	13.6-13.85	≥13.85

Products