430(1.4016) Stainless Steel Sheet/Plate

Wuxi Sino Yuan Science and Technology co.,ltd

Home > Products > Stainless Steel Sheet/Plate > 430(1.4016) Stainless Steel Sheet/Plate

Introduction

SS430(1.4016) is a low-carbon plain chromium,ferritic stainless steel without any stabilization of carbon and nitrogen with titanium or niobium.With 16% chromium,the steel has good crrosion resistance in soft corrosive environments and good oxidation resistance at elevator temperatures.Annealed SS430 is ductile and can be formed using a large variety of roll forming or mild stretch-bending operations as well as the more common drawing and bending operations.
SS430 has limited weldability and should not be used in the as-welded condition for dynamic or impact loaded structures.SS430 can form martensite in the heat affected zone of weldments,which may adversely affect the mechanical properties an these zones.Applications involving welded SS430 are generally limited to a maximum thickness of 3mm.

Grade	430(1.4016) stainless steel sheet
Thickness	0.3-6mm
Widthness	1000mm, 1219mm, 1524mm or as customized
Length	2438mm, 3048mm, 6096mm or as customized
Brand name	TISCO,BAO Steel,ZPSS,BAO XIN,LISCO..
Standard	JIS, AISI, ASTM, GB, DIN, EN ,etc.
Finish	2B, Hairline, No.4, BA, 8K mirror, etc.
Certification	SGS
Packaging	Standard exporting packing; seaworthy package.
MOQ	2 Tons

Realted Products:

Stainless steel wire rod,stainless steel pipe/tube,stainless steel flat bar,stainless steel angel bar...

Corrosion Resistance:
SS430 has good corrosion resistance in a wide varitely of corrosive environments including nitric acid and some organic acids.It is generally used for highly polished applications and in mild atmospheres such as for food processing and dairy equipment.Atmospheric corrosion resistance is good,although in highly polluted or marine environments staining may occur.

Annealing:
Annealing is achieved by heating to above 760℃ and 830℃for 90 minutes per 25mm thickness followed by air quenching.Controlled atmospheres are recommended in order to avoid excessive oxidation of the surface.

Welding:
SS430(1.4016) is prone to brittle characteristic in the heat-affected zone of weldments due to formation of martensitic phase.Thw tensile,fatigue and thoughness properties in the welded condition are relatively poor.So SS430 should not be used for applications where tensile or dynamic loading will be experience.Edge welds are not recommended for SS430.The use of austenitic filler metals such as types 309S or 316L will improve the ductility of welds to some extent but all welding procedures should nevertheless endeavor to maintain minimum heat inputs.The weld discoloration should be removed by pickling and p[assivating to restore maximum corrosion resistance.

Specification

Chemical Composition and mechanical properties:

430	C	Si		Mn	P		S	Ni	Cr
	≤0.12	≤0.75		≤1.00	≤0.04		≤0.03	≤0.6	16.00~18.00
tensile strength σb (MPa)			yield strength σ0.2(MPa)			elongation δ5(%)			Hardness HB
≥450			≥205			≥22			≤200

tolerance range of 430 cold rolled stainless steel sheet/plate
Thickness	Large Tolerance	Normal Tolerance	Small Tolerance	No Tolerance
0.4MM	0.3-0.32	0.33-0.37	0.37-0.39	≥0.39
0.5MM	0.4-0.42	0.43-0.47	0.47-0.49	≥0.49
0.6MM	0.5-0.52	0.53-0.56	0.57-0.59	≥0.59
0.7MM	0.6-0.62	0.63-0.67	0.67-0.69	≥0.69
0.8MM	0.7-0.72	0.73-0.77	0.74-0.79	≥0.79
0.9MM	0.8-0.82	0.83-0.87	0.87-0.89	≥0.89
1.0MM	0.89-0.9	0.91-0.94	0.94-0.99	≥0.99
1.2MM	1.02-1.08	1.09-1.15	1.16-1.18	≥1.18
1.5MM	1.32-1.38	1.39-1.45	1.46-1.48	≥1.48
2.0MM	1.72-1.79	1.8-1.86	1.87-1.9	≥1.9
2.5MM	2.23-2.36	2.32-2.42	2.42-2.47	≥2.48
3.0MM	2.7-2.77	2.78-2.85	2.85-2.9	≥2.9

tolerance range of 430 hot rolled stainless steel sheet/plate
Thickness	Large Tolerance	Normal Tolerance	Small Tolerance	No Tolerance
3.0MM	2.6-2.75	2.75-2.85	2.86-2.9	≥2.9
4.0MM	3.5-3.6	3.6-3.75	3.76-3.95	≥3.95
5.0MM	4.5-4.6	4.6-4.75	4.75-4.95	≥4.95
6.0MM	5.4-5.6	5.6-5.75	5.75-5.85	≥5.85
8.0MM	7.3-7.5	7.5-7.65	7.65-7.85	≥7.85
10.0MM	9.2-9.3	9.3-9.6	9.6-9.85	≥9.85
12.0MM	11.1-11.2	11.2-11.6	11.6-11.85	≥11.85
14.0MM	13.1-13.2	13.2-13.6	13.6-13.85	≥13.85

Products