This belt for rollermill combines two of product technologies.
On one side the belt has a tooth profile of synchronous belt, and on the other side, it has a profile of ribbed v belt.
This combination of both timing and friction technology is required to mill grain into fine flour quality.
It combines the best of two worlds: optimized efficiency from a synchronous drive and ability to slip when blocked or overloaded from a would break, when this occurs.

* Chloroprene body provides protection against oil, grease, heat and aging.

* Glass fiber cords provides high strength, good flexing performance, and low elongation.

* Nylon fabric tooth facing provides resistance to abrasion and tooth shear.

Type	Pitch Length(mm)	Width(mm)
1880-RPP10M-17PL	1880	79.9
1760-RPP10M-17PL	1760	79.9
1760-RPP8M-12PK	1760	42.72
1760-RPP8M-24PK	1760	85.44
1760-RPP8M-28PK	1760	99.68
1760-RPP8M-26PL	1760	122.2
1552-S8M-30PK	1552	106.8
1552-S8M-16PK	1552	56.96
1552-S8M-14PK	1552	49.84
1600-S8M-12PK	1600	42.72
1200-S8M-12PK	1200	42.72
1400-8M-12PK	1400	42.72
1600-8M-12PK	1600	42.72
1680-8M-12PK	1680	42.72
1760-8M-12PK	1760	42.72
2000-8M-12PK	2000	42.72
DPL1765-22PL	1765	103.4
DPL1765-26PL	1765	122.2
DPL1965-22PL	1965	103.4
DPL1965-26PL	1965	122.2
425-5M-25	425	25
420-5M-25	420	25
350-5M-25	350	25

CSH ROLLERMILL BELTS