ETF 012 Humidity Regulating wanted-Choose ETF 012 Humidity Regulating Manufacturer

Home > Products > Regulating > Humidity Regulating > ETF 012 Humidity Regulating

ETF 012 Humidity Regulating

Electronic Hygrotherm ETF012

* Temperature and humidity adustable
* Optical operating display (LED)
* High switching capacity
* Clip fixing

The Electromechanical hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. The LED integrated in the adjustment knob on the active controller is lit when the connected device is in operation.

Switch difference (temperature)	2K ( ± 1K tolerance) at 25 ℃ /77 ℉ (50% RH)
Switch difference (humidity)	4% RH(±1% RH tolerance) at 25 ℃ /77 ℉ (50% RH)
Reaction Timer	5 sec.
Contact type	change-over contact (relay)
Contact resistance	< 10m ohm (incidental connection line)
Service life	NC: 50 000 cycles
Service life	NO:100 000 cycles
Max. switching capacity (relay output)	NC:240VAC, 6(1)A
	NO:120VAC,8(1.6)A
	NC:240VAC, 6(1)A
	NO:120VAC,8(1.6)A
	100VDC at 24 VDC
EMC	acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Optical indicator	LED
Connection	5-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm²
Mounting	clip for 35mm DIN rail, EN50022
Casing	plastic according to UL94 V-0, light gray
Dimensions	77 x 60 x 43mm
Weight	approx. 200g
Fitting position	vertical
Operating/Storage temperature	0 to +60 ℃ ( +32~+140 ℉ )/ -20 to +70°C(-4~158 ℉ )
Operating/Storage humidity	Max. 90% RH (non-condensing)
Protection type	IP20

Art. No.	Operating voltage	Setting range	Approval
01230.0-00	230VAC, 50/60HZ	50 to 90% RH	CE
01230.9-00	120VAC, 50/60HZ	50 to 90% RH	CE

Products