LD320 Five-Roller Cold Pilger Mill,Five-Roller Cold Pilger Mill wanted-Choose LD320 Five-Roller Cold Pilger Mill,Five-Roller Cold Pilger Mill Manufact

Home > Products > Five-Roller Cold Pilger Mill > LD320 Five-Roller Cold Pilger Mill

LD320 Five-Roller Cold Pilger Mill

Introduction

1. The main conveying system is with V belt which can make sure equal force , creditable and stable function .
2. There are airbag type clutch and hydraulic brake between belt pulley and driving shaft which can brake quickly and stop exactly during the urgency .
3. The precision of steel pipe is high enough to be manufactured thin-wall pipe with five-roller .
4. The rolling mill adopts edge feeding way removing the 脱芯棒 comparing to the side feeding . The exact location of mandrel on the deformation zone and short rolling line not only suit for rolling long tube billet but also improve the roller’s efficiency .
5. Electric-control feeding and discharging way improve the working efficiency .
6. It is easy to change and maintain the roller .
7.Twin-wire feeding way realize the stable feeding.
8. To tighten with hydraulic mandrel lowers the labor strength .
9. The mechanical CAM type rotary feeding way is stable and reliable .

Parameter

№	Name	Number	Unit
1	Shell OD	170-330	mm
2	Shell WT	3-20	mm
3	Max Shell Length	8	m
4	Finished Tube OD	160-320	mm
5	Finished Tube WT	2-18	mm
6	Max length Finished Tube	15	m
7	Rolling speed	15-45	Times/min
8	Stroke length	1506	mm
9	Feeding length	2-10	mm
10	Turning angle(degree)	42°
11	Form of feeding and turning	Cam
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	631,700	mm
14	Length of connecting rod	4500	mm
15	Stroke length distance from tube center to gear center	400	mm
16	Power of main motor	400	Kw
17	Feeding way	Feeding after stopping
18	Dimension(Lx Wx H)	55x7.4x4	m

Products