Interested in cold pilger mill,pilger mill,LD60 Series Three-Roller Cold Pilger Mill ? Choose Hengli Machinery cold pilger mill,pilger mill,LD60 Ser

Home > Products > Three-Roller Cold Pilger Mill > LD60 Series Three-Roller Cold Pilger Mill

LD60 Series Three-Roller Cold Pilger Mill

Introduction

1. The main conveying system is with V belt which can make sure equal force , creditable and stable function .
2. The precision of steel pipe is high enough to be manufactured thin-wall pipe with three-roller .
3. The rolling mill adopts edge feeding way removing the 脱芯棒 comparing to the side feeding . The exact location of mandrel on the deformation zone and short rolling line not only suit for rolling long tube billet but also improve the roller’s efficiency .
4. Electric-control feeding and discharging way improve the working efficiency .
5. It is easy to change and maintain the roller .
6. Twin-wire feeding way realize the stable feeding.
7. To tighten with hydraulic mandrel lowers the labor strength .
8. The Mairtai type rotary feeding way is precise , stable and reliable .

LD60

№	Name	Number	Unit
1	Shell OD	32-64	mm
2	Shell WT	≤ 4	mm
3	Max Shell Length	5	m
4	Finished Tube OD	30-60	mm
5	Finished Tube WT	≤ 3.5	mm
6	Max length Finished Tube	12	m
7	Rolling speed	40-80	Times/min
8	Stroke length	603.1	mm
9	Feeding length	2-8.3	mm
10	Turning angle(degree)	66.7°
11	Form of feeding and turning	Cam
12	Diameter of roll	118	mm
13	Length of connecting rod	2000	mm
14	Power Supply	38	mm
15	Power of main motor	55	Kw
16	Dimension(Lx Wx H)	32x4x1.5	m

LD60 Hydraumatic Type

№	Name	Number	Unit
1	Shell OD	32-69	mm
2	Shell WT	0.8-4	mm
3	Max Shell Length	5	m
4	Finished Tube OD	30-65	mm
5	Finished Tube WT	0.5-3.5	mm
6	Max length Finished Tube	12	m
7	Rolling speed	40-80	Times/min
8	Stroke length	603.1	mm
9	Feeding length	3-8	mm
10	Turning angle(degree)	48°
11	Form of feeding and turning	hydraumatic
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	131，143	mm
14	Length of connecting rod	2000	mm
15	Stroke length distance from tube center to gear center	200	mm
16	Power of main motor	55	Kw
17	Feeding way	Feeding after stopping
18	Dimension(Lx Wx H)	28x3.5x1.5	m

LD60 Machinery Type

№	Name	Number	Unit
1	Shell OD	32-69	mm
2	Shell WT	0.8-4	mm
3	Max Shell Length	5	m
4	Finished Tube OD	30-65	mm
5	Finished Tube WT	0.5-3.5	mm
6	Max length Finished Tube	12	m
7	Rolling speed	40-80	Times/min
8	Stroke length	603.1	mm
9	Feeding length	2-8.3	mm
10	Turning angle(degree)	54°
11	Form of feeding and turning	hydraumatic
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	131，143	mm
14	Length of connecting rod	2000	mm
15	Stroke length distance from tube center to gear center	220	mm
16	Power of main motor	55	Kw
17	Feeding way	Feeding after stopping
18	Dimension(Lx Wx H)	28x2.4x1.5	m

Products