Four cylinder/eight cylinder electro-hydraulic synchronous CNC bending machine is a product of independent research and development of machine tools in the east China sea, compared with traditional two cylinder bending machine, in the Angle of the sheet metal processing size and straightness has obvious improvement, effective guarantee the effect of bending, to ensure product quality under the condition of reduce the cost of materials, improve bending effect, year-on-year decline in raw material material requirements, improve the product quality.In particular, the production and production of the 3000-ton eight-cylinder combined bending machine, the innovative four-cylinder linkage, has filled the gap in the domestic field.
Compared with the traditional two-cylinder bending machine, the four-cylinder/eight-cylinder hydraulic synchronous bending machine has the following characteristics:
1. Rack:
The four-cylinder structure is composed of two integral welding frames, and the two racks are fastened together with the screw and the lower link beam.The two cylinder structure is composed of two single wall panels, with screws and mailboxes, and the connecting beam is fastened together.
The four cylinders are more stable than the two cylinders: processing, installation and transportation are more convenient, safe and reliable.
2. Stiffness of sliding block workbench:
The working table and vertical plate of the four-cylinder structure have four pressure points and supporting points of the oil cylinder. The distance (span) of the pressure point (the supporting point) is shorter and the deflection deformation is very small.After adjustment of machine tool, no matter in the pressure condition of any tonnage, it is not necessary to adjust the compensation amount.The span of two cylinder structure sliding block and workbench use point (supporting point) has a large span and the deflection deformation is large, so it needs to be compensated for by artificial (or numerical control).
The four cylinder is more convenient, simple and suitable for the operation of the two cylinder structure system.
3. Horizontal stiffness of sliding block and workbench:
The sliding block of the four-cylinder structure is supported by four sliding guide rails, and the sliding block is better than that of the vertical plane of the die, and it will not be distorted by the horizontal component of the bending piece.The horizontal straightness of work bending is higher.
4. Foundation:
Since the four-cylinder structure has four walls, the weight of the whole machine is assumed by four wallboards, so the basic requirements for the ground endurance and the base thickness are lower than those of two cylinders.The basic depth of four cylinders is less than 1/3 of the structure of the two cylinders.
5. Venue:
The machine tool of the same specification, the width of the machine tool of the four cylinder structure is narrow 1000mm.
6. Maintenance:
Because the mailbox of the four-cylinder structure is smaller than two cylinders, the imported sealing ring should be less expensive to purchase or replace.And spare parts procurement cycle should be short, the market procurement is convenient.
Model |
Nominal Pressure(KN) |
Length of Table(mm) |
Distance between columns(mm) |
Throat Depth(mm) |
Stroke(mm) |
Open Height(mm) |
Main Motor(KW) |
Overall Dimensions L*W*H(mm) |
500t/7000 |
5000 |
7000 |
3*2000 |
500 |
250 |
580 |
37 |
7200*2550*3800 |
500t/8000 |
5000 |
8000 |
3*2130 |
500 |
250 |
580 |
37 |
8200*2550*4220 |
600t/7000 |
6000 |
7000 |
3*2000 |
500 |
250 |
580 |
45 |
7200*2600*4000 |
600t/8000 |
6000 |
8000 |
3*2130 |
500 |
250 |
580 |
45 |
8200*2600*4350 |
600t/9000 |
6000 |
9000 |
3*2500 |
500 |
250 |
600 |
45 |
9200*2600*4700 |
800t/6000 |
8000 |
6000 |
3*1650 |
500 |
320 |
650 |
2*30 |
6200*2600*4900 |
800t/8000 |
8000 |
8000 |
3*2350 |
500 |
320 |
650 |
2*30 |
8200*2700*5100 |
800t/10000 |
8000 |
10000 |
3*2600 |
500 |
320 |
650 |
2*30 |
10200*2700*5200 |
800t/12000 |
8000 |
12000 |
3*3000 |
500 |
320 |
650 |
2*30 |
12200*2800*5300 |
1000t/6000 |
10000 |
6000 |
3*1600 |
500 |
320 |
650 |
2*37 |
6200*2800*5700 |
1000t/8000 |
10000 |
8000 |
3*2300 |
500 |
320 |
650 |
2*37 |
8200*2800*5900 |
1000t/10000 |
10000 |
10000 |
3*2600 |
500 |
320 |
650 |
2*37 |
10200*2800*6100 |
1000t/12000 |
10000 |
12000 |
3*3000 |
500 |
320 |
650 |
2*37 |
12200*2800*6400 |
1200t/6000 |
12000 |
6000 |
3*1600 |
600 |
320 |
800 |
2*37 |
6200*2900*5750 |
1200t/8000 |
12000 |
8000 |
3*2300 |
600 |
320 |
800 |
2*37 |
8200*3000*5900 |
1200t/10000 |
12000 |
10000 |
3*2600 |
600 |
320 |
800 |
2*37 |
10200*3000*6000 |
1200t/12000 |
12000 |
12000 |
3*3000 |
600 |
320 |
800 |
2*37 |
12200*3000*6100 |
1600t/8000 |
16000 |
8000 |
3*2300 |
800 |
400 |
800 |
2*45 |
8200*3300*6300 |
1600t/10000 |
16000 |
10000 |
3*2600 |
800 |
400 |
800 |
2*45 |
10200*3300*6400 |
1600t/12000 |
16000 |
12000 |
3*3000 |
800 |
400 |
800 |
2*45 |
12200*3350*6500 |
2000t/10000 |
20000 |
10000 |
3*2600 |
800 |
400 |
800 |
2*55 |
10500*3500*6700 |
2000t/12000 |
20000 |
12000 |
3*3000 |
800 |
400 |
800 |
2*55 |
12500*3700*6900 |