Our Video
Shanghai Bozhong Metal Group Co., Ltd was founded in 2006, with 31 million registered fund, It is the leading integrated operator of modern service industry for specialty stainless steel.
Share
Hot Products
-
Creusabro SupertenExtra thick wear plate with enhanced crack resistance Creusabro Superten is an abrasion resistant steel with high tensile properties and enhanced crack resistance. As a result, it is used in massive structure components submitted to heavy service loads inservice conditions, in an abrasive environ
-
Bozhong 8000A high performance wear and impact resistant steel Bozhong 8000 is a high performance wear resistant steel, exhibiting a wear resistance 50% higher than conventional 500HB water quenched steel, combined with excellent weldability and very acceptable workability. Rather than relying exclusiv
Contact Us
- Contacter: Mr. Huang
- Tel: +86-21-57629638
- Fax: +86-21-57629638
- Email: inquiry@bzmetal.com
-
Company Address:
Room 501,Building 32,Caohejing High-tech park,Songjiang District,Shanghai City,China
Products
Creusabro Superten
Extra thick wear plate with enhanced crack resistance
Creusabro Superten is an abrasion resistant steel with high tensile properties and enhanced crack resistance. As a result, it is used in massive structure components submitted to heavy service loads inservice conditions, in an abrasive environment. Thicknesses range of Creusabro Superten extends from 50 to 180 mm. For heavier gauges, please inquire us.
Typical applications: Buckets, cutting blades, demolition and recycling equipment, scrap shears and high thickness structural parts.
Standards
Creusabro Superten
Bozhong 8000
A high performance wear and impact resistant steel
Bozhong 8000 is a high performance wear resistant steel, exhibiting a wear resistance 50% higher than conventional 500HB water quenched steel, combined with excellent weldability and very acceptable workability. Rather than relying exclusively on a high hardness level, properties of Bozhong 8000 are improved as a result of the combination of an enriched alloying content (chromium, nickel, molybdenum and titanium) and specific heat treatment procedures.
The moderate hardness of Bozhong 8000 in the as delivered condition makes processing operations like cutting, machining and forming easier and far better than ordinary water quenched steels. When in service, Bozhong 8000 strongly improves its wear resistance by a surface hardening effect of about +70 HB under the action of local plastic deformations caused by impact with rocks or pressure by the abrasive particles. Bozhong 8000 is ideal for applications in mines and quarries, cement and steelmaking industries, public works and agricultural machinery. In the toughest industries such as mining and earth moving, the higher resistance to wear and impact abrasion translates into increased service life of wearparts and components made of Bozhong 8000 against conventional water quenched steels.
As a result, significant costs saving benefits are achieved to plant maintenance budgets. The grade is suitable for all types of abrasion, sliding or impact, dry or wet environments, including operating temperatures up to 350-450°C.
Standards
Bozhong 8000 is a proprietary and exclusive grade developed by Bozhong. There exists no engineering standard for plates intended for wear resistant applications.
Creusabro 4800
Advanced technology in wear
Bozhong 4800 is a high performance wear resistant steel, exhibiting a wear resistance 50% higher than that of conventional 400HB water quenched steel.
Rather than relying exclusively on a high hardness level, properties of Bozhong 4800 are improved as a result of the combination of an enriched alloying content (chromium, nickel, molybdenum and titanium) and specific heat treatment procedures. Bozhong 4800 is designed to offer the best possible optimization of an exceptional wear resistance and very acceptable workability.
The moderate hardness of Bozhong 4800 in the asdelivered condition makes processing operations like cutting, machining and forming easier and far better than ordinary water quenched steels.
When in service, Bozhong 4800 strongly improves its wear resistance by a surface hardening effect of about +70 HB under the action of local plastic deformations caused by impact with rocks or pressure by the abrasive particles.
Bozhong 4800 is ideal for applications in mines and quarries, cement and steelmaking industries, public works and agricultural machinery. The grade is suitable for all types of abrasion, sliding or impact, dry or wet environments, including operating temperatures up to 350 – 450°C.
Standards
Bozhong 4800 is a proprietary and exclusive grade developed by Bozhong There exists no engineering standard for plates intended for wear resistant applications.
Rolled Rings
As a subsidiary of the ArcelorMittal Group we also work in close collaboration with the different research centers within the group. They allow us to provide solutions that are economically efficient and suited to our customers needs throughout our product range.
Our rings are manufactured according to international standards or customer specifications, in a large range of readily available steel grades :
Weldable carbon steels
Low-alloy steels
Alloyed steels for carburizing or nitriding
Stainless Steel
Steel Plates And Profile Cut Pieces
Industeel can make heavy ingots up to 130 t unit weight in a full range of special steel chemistries. These ingots can then be transformed into high quality extra-heavy plates through a unique combination of forging and rolling to ensure excellent internal plate quality and good dimensional tolerances and surface quality.
Industeel’s flame-cut machining facilities then allow these heavy plates to be cut to shape irrespective of thickness.
Special Ingots
Low Hydrogen
Metal degassing at low pressure, and the creation of adapted slag enables us to obtain hydrogen content down to 1ppm through a vacuum pouring process.
Sulphur content
• Appropriate metal and slag deoxidation enables us to produce low sulphur aims under 10ppm sulphur content.
• For grades with aimed sulphur, calcium treatment is used to obtain globular inclusion in order to facilitate machining.
Inclusion cleanliness
The specific steel plant facilities (furnace, LF, VD/VOD), and process control guarantee very low oxygen content and
Rings & Tyres
Rings are manufactured according to international standards or customer specifications, in a large range of readily available steel grades (weldable carbon steel, low-alloy steels, alloyed steels for carburizing or nitriding, and stainless steel).
Formed Piece
Bozhong is fully equipped for the forming and pressing of heavy and extra-heavy plates.
With wide experience in the production of heavy pressed complex shaped pieces and special heavy formed pieces, Bozhong is adapted to meet the most severe specifications in diverse domains of the offshore, hydro-electric, nuclear, and petrochemical markets…
Creusabro Superten
Extra thick wear plate with enhanced crack resistance
Creusabro Superten is an abrasion resistant steel with high tensile properties and enhanced crack resistance. As a result, it is used in massive structure components submitted to heavy service loads inservice conditions, in an abrasive environment. Thicknesses range of Creusabro Superten extends from 50 to 180 mm. For heavier gauges, please inquire us.
Typical applications: Buckets, cutting blades, demolition and recycling equipment, scrap shears and high thickness structural parts.
Standards
Creusabro Superten
Bozhong 8000
A high performance wear and impact resistant steel
Bozhong 8000 is a high performance wear resistant steel, exhibiting a wear resistance 50% higher than conventional 500HB water quenched steel, combined with excellent weldability and very acceptable workability. Rather than relying exclusively on a high hardness level, properties of Bozhong 8000 are improved as a result of the combination of an enriched alloying content (chromium, nickel, molybdenum and titanium) and specific heat treatment procedures.
The moderate hardness of Bozhong 8000 in the as delivered condition makes processing operations like cutting, machining and forming easier and far better than ordinary water quenched steels. When in service, Bozhong 8000 strongly improves its wear resistance by a surface hardening effect of about +70 HB under the action of local plastic deformations caused by impact with rocks or pressure by the abrasive particles. Bozhong 8000 is ideal for applications in mines and quarries, cement and steelmaking industries, public works and agricultural machinery. In the toughest industries such as mining and earth moving, the higher resistance to wear and impact abrasion translates into increased service life of wearparts and components made of Bozhong 8000 against conventional water quenched steels.
As a result, significant costs saving benefits are achieved to plant maintenance budgets. The grade is suitable for all types of abrasion, sliding or impact, dry or wet environments, including operating temperatures up to 350-450°C.
Standards
Bozhong 8000 is a proprietary and exclusive grade developed by Bozhong. There exists no engineering standard for plates intended for wear resistant applications.
Creusabro 4800
Advanced technology in wear
Bozhong 4800 is a high performance wear resistant steel, exhibiting a wear resistance 50% higher than that of conventional 400HB water quenched steel.
Rather than relying exclusively on a high hardness level, properties of Bozhong 4800 are improved as a result of the combination of an enriched alloying content (chromium, nickel, molybdenum and titanium) and specific heat treatment procedures. Bozhong 4800 is designed to offer the best possible optimization of an exceptional wear resistance and very acceptable workability.
The moderate hardness of Bozhong 4800 in the asdelivered condition makes processing operations like cutting, machining and forming easier and far better than ordinary water quenched steels.
When in service, Bozhong 4800 strongly improves its wear resistance by a surface hardening effect of about +70 HB under the action of local plastic deformations caused by impact with rocks or pressure by the abrasive particles.
Bozhong 4800 is ideal for applications in mines and quarries, cement and steelmaking industries, public works and agricultural machinery. The grade is suitable for all types of abrasion, sliding or impact, dry or wet environments, including operating temperatures up to 350 – 450°C.
Standards
Bozhong 4800 is a proprietary and exclusive grade developed by Bozhong There exists no engineering standard for plates intended for wear resistant applications.
Rolled Rings
As a subsidiary of the ArcelorMittal Group we also work in close collaboration with the different research centers within the group. They allow us to provide solutions that are economically efficient and suited to our customers needs throughout our product range.
Our rings are manufactured according to international standards or customer specifications, in a large range of readily available steel grades :
Weldable carbon steels
Low-alloy steels
Alloyed steels for carburizing or nitriding
Stainless Steel
Steel Plates And Profile Cut Pieces
Industeel can make heavy ingots up to 130 t unit weight in a full range of special steel chemistries. These ingots can then be transformed into high quality extra-heavy plates through a unique combination of forging and rolling to ensure excellent internal plate quality and good dimensional tolerances and surface quality.
Industeel’s flame-cut machining facilities then allow these heavy plates to be cut to shape irrespective of thickness.
Special Ingots
Low Hydrogen
Metal degassing at low pressure, and the creation of adapted slag enables us to obtain hydrogen content down to 1ppm through a vacuum pouring process.
Sulphur content
• Appropriate metal and slag deoxidation enables us to produce low sulphur aims under 10ppm sulphur content.
• For grades with aimed sulphur, calcium treatment is used to obtain globular inclusion in order to facilitate machining.
Inclusion cleanliness
The specific steel plant facilities (furnace, LF, VD/VOD), and process control guarantee very low oxygen content and
Rings & Tyres
Rings are manufactured according to international standards or customer specifications, in a large range of readily available steel grades (weldable carbon steel, low-alloy steels, alloyed steels for carburizing or nitriding, and stainless steel).
Formed Piece
Bozhong is fully equipped for the forming and pressing of heavy and extra-heavy plates.
With wide experience in the production of heavy pressed complex shaped pieces and special heavy formed pieces, Bozhong is adapted to meet the most severe specifications in diverse domains of the offshore, hydro-electric, nuclear, and petrochemical markets…
