Zinc shot is made with the process of drawing, cutting and conditioning etc.. And they are used for deburing and cleaning on various Aluminum alloy, Zinc die castings. Because their specific gravity is close to steel and the hardness is low, the deburing can be performed without wearing the products' surfaces. Otherwise distinguished from Aluminum abrasive, the security is nice for much lower kinding point of the dust. And they are also characterized at obvious whitening on the surfaces of the work pieces.


Zinc cut wire shot abrasive offers a media of very low Rockwell B hardness (20 - 30) suitable for use in deburring die castings.
Zinc shot is capable of removing flash up to .020 " from die castings.
Zinc shot also leaves a deposition of zinc on the work object that provides corrosion resistance.
Zinc shot is also used to strip paint and powder coatings.  The softness of the zinc shot is very effective at removing coatings without damaging tooling.

Package
Our company can carry out woven bag packaging, ton bag packaging, wood tray packaging, plastic packing packaging and the like according to customer requirements

Name	Zinc Cut shot
Chemical Composition	Zn≥99%
Microhardness	45～50HV
Tensile Strength	90～120Mpa
Owen life	6000 times
Mettallographical Stucture	Deformation alpha
Size	0.6-2.5mm
Density	7.1g/cm3
Packing Density	4.1 g/cm3

Widely used in metal die casting; precision casting; hardware machinery manufacturing; auto instrumentation and valve industries products surface cleaning, derusting, intensifying, smoothing and so on.