LG30 Series Two-Roller Cold Pilger Mill

Home > Products > Two-Roller Cold Pilger Mill > LG30 Series Two-Roller Cold Pilger Mill

Introduction

The features of LG30 Series two-roller cold pilger mill :
1. The main conveying system is with V belt which can make sure equal force , creditable and stable function .

2. The adoption of ring groove roller is to realize long term rolling . Big rotation angle of roller , longer ring type working stage and increased length of deformation zone lead to the uniformity of metal deformation during the rolling . At the same time , it can increase feeding volume and improve the quality of the final processed pipe .

3. The rolling mill adopts edge feeding way removing the mandrel comparing to the side feeding . The exact location of mandrel on the deformation zone and short rolling line not only suit for rolling long tube billet but also improve the roller’s efficiency .

4. Electric-control feeding and discharging way improve the working efficiency .

5. It is easier to replace the roller and more convenient to maintain based on the open rack .

6. Twin-wire feeding way realize the stable feeding.

7. To tighten with hydraulic mandrel lowers the labor strength .

8. The Mairtai type rotary feeding wau is precise , stable and reliable .

LG30G

№	Name	Number	Unit
1	Shell OD	22-65	mm
2	Shell WT	1.5-6	mm
3	Shell Length	6	m
4	Finished Tube OD	15-32	mm
5	Finished tube WT	0.6-5	mm
6	Max. Length of the Finished Tube	15	m
7	Rolling speed	60-100	Times/min
8	Stroke length	605	mm
9	Feeding length	1-10	mm
10	Turning angle(degree)	36-72°
11	Form of feeding and turning	DC with electrical drive
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	250	mm
14	Length of connecting rod	1650	mm
15	Stroke length distance from tube center to gear center	220	mm
16	Roll module of gear	8
17	Power of main motor	55	Kw
18	Feeding way	From back after stopping
19	Dimension(Lx Wx H)	32x3.5x1.5	m

LG30II

№	Name	Number	Unit
1	Shell OD	22-65	mm
2	Shell WT	1.5-6	mm
3	Shell Length	6	m
4	Finished Tube OD	15-32	mm
5	Finished tube WT	0.6-5	mm
6	Max. Length of the Finished Tube	15	m
7	Rolling speed	60-100	Times/min
8	Stroke length	605	mm
9	Feeding length	2-8.3	mm
10	Turning angle(degree)	66.7°
11	Form of feeding and turning	Mairtai
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	250	mm
14	Length of connecting rod	1650	mm
15	Stroke length distance from tube center to gear center	220	mm
16	Roll module of gear	8
17	Power of main motor	55	Kw
18	Feeding way	From back after stopping
19	Dimension(Lx Wx H)	32x3.5x1.5	m

LG30B

№	Name	Number	Unit
1	Shell OD	22-65	mm
2	Shell WT	1.5-6	mm
3	Shell Length	6	m
4	Finished Tube OD	15-32	mm
5	Finished tube WT	0.6-5	mm
6	Max. Length of the Finished Tube	15	m
7	Rolling speed	80-160	Times/min
8	Stroke length	603	mm
9	Feeding length	1-10	mm
10	Turning angle(degree)	36-72°
11	Form of feeding and turning	Servo photoelectric
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	250	mm
14	Length of connecting rod	1650	mm
15	Stroke length distance from tube center to gear center	200	mm
16	Roll module of gear	8
17	Power of main motor	55	Kw
18	Feeding way	From back after stopping
19	Dimension(Lx Wx H)	40x3.5x1.5	m

Products