• Material (where applied to the figure): stainless steel.
• Harvesting before stamping sheet.
• Material sheet stamping: sheet 0.8-1.5mm
• Billet size (sheets): 1250 mm x 2500 mm.
• Sheet metal thickness (where it leaves an imprint): from 0.5 to 2.0 mm.
• Depth footprint (the depth of the picture after embossing): 50 microns = 1/20 mm = 0,05 mm.
• Speed stamping: not important (but not less than 3 metres per minute).
• Type of stamping: unilateral model rolling. (Figure applied only on the front side. Back ready sheet, remains smooth and clean.)
• Roller type: removable. (That we could change the picture.)
• In the proposal. Specify the cost of additional rollers.

The embossing machine is made for the inner and outside wall panel and roof panel.

• 
• 
• 
  
•