Introduction
309 s corresponding Chinese brand is 0 cr23ni13, American standard S30908 (American AISI, ASTM) .corrosion resistance, heat resistance are better than 0 cr19ni9.309 s is containing sulfur free cutting stainless steel.

It is a variation of 309 stainless steel  with lower carbon content. It is applied to the occasion. Low carbon content is made in the heat affected zone near the weld in the precipitation of carbide to a minimum,which may result in precipitation of carbide stainless steel inter-granular corrosion in some environments (welding erosion)

Technical Parameter

309S stainless steel
Standard	Grade	Chemical Composition %	Technique	Yied strength Mpa	Tensile strength Mpa	Elongation %	Hardness
GB	0Cr23Ni13	C≤0.08，Mn≤2.00， Si≤1.00，P≤0.045， S≤0.030，Cr 22.0~24.0, Ni 12.0~15.0	hot, cold rolled	≥205	≥520	≥40	HV≤200
USA	309S
JIS	SUS309S
German	/

Stainless Steel Angle Bar
Stainless steel angel bar is perpendicular to each other on both sides of the strip into angular steel.

Stainless steel angel bar composed of various components of the force, but also for connections between components. Widely used in various building structures and engineering structures such as bridges, transmission towers, hoisting and conveying machinery, ships, industrial furnace, reaction tower, container frame and warehouse shelves.

Application
309S Generally used for furnace material, produced in 850 ℃ -- 1050 ℃ work of all kinds of heat-resistant artifacts, such as bracket, conveyor belts,annealing furnace cover, thermal cracking tubes, etc. Mainly used for free cutting and the surface which is bright and high clean demanding occasions