Water Chiller/Packaged Chillers
3
Share
Feature
Products Features
1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time.
2.Four stage volume control or 0%-100% automatic regulation.
3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace.
4.Perfect breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection.
Product options
1.Salt water evaporator
2.Stepless energy regulation
3.Whole heat recovery/partial heat recovery
4.Pump control
5.Special power supply
6.Remote communication connector
Product specfication
Refrigerant: R22/R407C
Evaporator max water pressure drop: 1.0Mpa
Evaporator: fouling factor 0.018m2.℃/KW
Power supply: 380V/3P/50Hz
Allowable voltage fluctuate: ±5%
Allowable frequency fluctuate: ±2%
The unit uses high efficiency heat exchanger with advanced, unique shape design and systems. Units can be installed directly on the roof, or other well-ventilated place outdoors, without a separate room, space saving construction. Compact shape, appearance, unit uses “W” type coil design, space utilization, small unit size, in order to adapt to the outdoor weather conditions to ensure that the unit has a good operating results during the life cycle.
Friendy choose to use environmentally R407C, R134A or R410A refrigerant ect.
There may be change of the dimensions without pre notice. For accurate you are welcome to ask us for installing drawing.
Technical parameter
1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time.
2.Four stage volume control or 0%-100% automatic regulation.
3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace.
4.Perfect breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection.
Product options
1.Salt water evaporator
2.Stepless energy regulation
3.Whole heat recovery/partial heat recovery
4.Pump control
5.Special power supply
6.Remote communication connector
Product specfication
Refrigerant: R22/R407C
Evaporator max water pressure drop: 1.0Mpa
Evaporator: fouling factor 0.018m2.℃/KW
Power supply: 380V/3P/50Hz
Allowable voltage fluctuate: ±5%
Allowable frequency fluctuate: ±2%
The unit uses high efficiency heat exchanger with advanced, unique shape design and systems. Units can be installed directly on the roof, or other well-ventilated place outdoors, without a separate room, space saving construction. Compact shape, appearance, unit uses “W” type coil design, space utilization, small unit size, in order to adapt to the outdoor weather conditions to ensure that the unit has a good operating results during the life cycle.
Friendy choose to use environmentally R407C, R134A or R410A refrigerant ect.
There may be change of the dimensions without pre notice. For accurate you are welcome to ask us for installing drawing.
Air cooled screw(heat) chiller(double compressor) technical parameter
Cooling condition: Cooling water inlet/outlet temperature 12/7 ℃, ambient dry bulb temperature 35℃
Heating condition:How water outlet temperature 45℃, ambient dry bulb temperature 7℃, ambient wet bulb temperature 6℃
Cooling condition: Cooling water inlet/outlet temperature 12/7 ℃, ambient dry bulb temperature 35℃
Heating condition:How water outlet temperature 45℃, ambient dry bulb temperature 7℃, ambient wet bulb temperature 6℃
Application
| VA- | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | 170D | 230D | 300D | 320D | 400D | 440D | 510D | 540D | 600D | 640D | |
| Nominal cooling capacity | kw | 170.0 | 230.0 | 300.0 | 320.0 | 400.0 | 440.0 | 510.0 | 540.0 | 600.0 | 640.0 |
| 104 kcal/h | 14.6 | 19.8 | 25.8 | 27.5 | 34.4 | 37.8 | 43.9 | 46.4 | 51.6 | 55.0 | |
| Nominal heating capacity | kw | 190.0 | 270.0 | 340.0 | 370.0 | 460.0 | 500.0 | 580.0 | 600.0 | 660.0 | 720.0 |
| 104 kcal/h | 16.3 | 23.2 | 29.2 | 31.8 | 39.6 | 43.0 | 49.9 | 51.6 | 56.8 | 61.9 | |
| Operating control method | Use PLC microcomputer control | ||||||||||
| Power Supply | 380V/3N/50HZ | ||||||||||
| Startup type | Y-△ | ||||||||||
| Machine power | kw | 61.6 | 81.8 | 100.6 | 119.2 | 141.2 | 153.4 | 170.0 | 177.0 | 199.6 | 216.8 |
| Machine operating current | A | 117.0 | 155.4 | 191.0 | 226.4 | 268.2 | 291.4 | 322.8 | 336.2 | 379.0 | 412.0 |
| Compressor | Type | Semi-closed 5:6 asymmetric twin-screw compressor | |||||||||
| Cooling power(kw) | 55.0 | 73.0 | 91.0 | 100.0 | 122.0 | 133.0 | 150.0 | 157.0 | 173.0 | 189.0 | |
| Cooling current(A) | 93.0 | 122.0 | 154.0 | 169.0 | 206.0 | 224.0 | 252.0 | 265.0 | 292.0 | 318.0 | |
| Heating power(kw) | 53.0 | 70.0 | 87.0 | 96.0 | 117.0 | 127.0 | 144.0 | 151.0 | 166.0 | 182.0 | |
| Heating current(A) | 89.0 | 117.0 | 148.0 | 162.0 | 197.0 | 214.0 | 240.0 | 254.0 | 280.0 | 304.0 | |
| Energy regulation | 0-16.5%-33%-...100% 0-12.5%-25%-37.5%-...100% | ||||||||||
| Evaporator | Type | High efficiency dry type shell and tube heat exchanger | |||||||||
| Flow(L/min) | 29.2 | 39.5 | 51.5 | 55.0 | 68.7 | 75.6 | 87.6 | 92.8 | 103.1 | 110.0 | |
| Water pressure drop(kPa) | 47.0 | 47.0 | 50.0 | 50.0 | 55.0 | 55.0 | 55.0 | 58.0 | 58.0 | 58.0 | |
| Interface size | DN80 | DN100 | DN125 | DN150 | |||||||
| Condenser | Type | High efficiency fin type heat exchanger | |||||||||
| Fan quantity | 6 | 6 | 8 | 8 | 10 | 10 | 10 | 12 | 12 | 12 | |
| Stand-alone power | 1.2 | 1.2 | 1.2 | 1.2 | 1.7 | 1.7 | 1.7 | 1.7 | 1.8 | 1.8 | |
| Refrigerant | Type | R22 | |||||||||
| Refrigerant volume(kg) | 34.0 | 46.0 | 60.0 | 64.0 | 80.0 | 90.0 | 104.0 | 110.0 | 120.0 | 130.0 | |
| Overall dimensions | Length(mm) | 3500 | 3500 | 4000 | 4000 | 4500 | 5000 | 5800 | 6000 | 6200 | 6200 |
| Width(mm) | 2150 | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | |
| Height(mm) | 2200 | 2200 | 2150 | 2250 | 2300 | 2350 | 2350 | 2350 | 2450 | 2550 | |
| Weight | Machine weight(kg) | 2800 | 3000 | 3900 | 4250 | 4650 | 4950 | 5600 | 5950 | 6250 | 6450 |
| Operating weight(kG) | 3100 | 3300 | 4200 | 4550 | 4950 | 5250 | 5900 | 6250 | 6550 | 6750 | |
Cooling condition: Cooling water inlet/outlet temperature 12/7 ℃, ambient dry bulb temperature 35℃
Heating condition:How water outlet temperature 45℃, ambient dry bulb temperature 7℃, ambient wet bulb temperature 6℃
| VA- | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | 700D | 840D | 890D | 980D | 1050D | 1090D | 1270D | 1400D | 1490D | 1680D | |
| Nominal cooling capacity | kw | 700.0 | 840.0 | 890.0 | 980.0 | 1050.0 | 1090.0 | 1270.0 | 1400.0 | 1490.0 | 1680.0 |
| 104 kcal/h | 60.2 | 72.2 | 76.5 | 84.3 | 90.3 | 93.7 | 109.2 | 120.4 | 128.1 | 144.5 | |
| Nominal heating capacity | kw | 800.0 | 940.0 | 1000.0 | 1100.0 | 1180.0 | 1220.0 | 1420.0 | 1560.0 | 1660.0 | 1880.0 |
| 104 kcal/h | 68.8 | 80.8 | 86.0 | 94.6 | 101.5 | 104.9 | 122.1 | 134.2 | 142.8 | 161.7 | |
| Operating control method | Use PLC microcomputer control | ||||||||||
| Power Supply | 380V/3N/50HZ | ||||||||||
| Startup type | Y-△ | ||||||||||
| Machine power | kw | 237.0 | 278.0 | 292.0 | 316.0 | 337.0 | 351.0 | 402.0 | 447.0 | 479.0 | 530.0 |
| Machine operating current | A | 424.0 | 497.0 | 522.0 | 565.0 | 602.0 | 628.0 | 718.0 | 800.0 | 856.0 | 946.0 |
| Compressor | Type | Semi-closed 5:6 asymmetric twin-screw compressor | |||||||||
| Cooling power(kw) | 210.0 | 244.0 | 258.0 | 280.0 | 301.0 | 310.0 | 358.0 | 397.0 | 422.0 | 474.0 | |
| Cooling current(A) | 354.0 | 411.0 | 434.0 | 470.0 | 506.0 | 522.0 | 602.0 | 668.0 | 708.0 | 797.0 | |
| Heating power(kw) | 202.0 | 234.0 | 247.0 | 268.0 | 288.0 | 297.0 | 343.0 | 380.0 | 404.0 | 454.0 | |
| Heating current(A) | 340.0 | 394.0 | 416.0 | 450.0 | 485.0 | 500.0 | 576.0 | 640.0 | 668.0 | 764.0 | |
| Energy regulation | 0-12.5%-25%-37.5%-...100% | ||||||||||
| Evaporator | Type | High efficiency dry type shell and tube heat exchanger | |||||||||
| Flow(L/min) | 120.3 | 144.3 | 152.9 | 168.4 | 180.4 | 187.3 | 218.2 | 240.5 | 256.0 | 288.7 | |
| Water pressure drop(kPa) | 52.0 | 55.0 | 55.0 | 58.0 | 60.0 | 60.0 | 62.0 | 70.0 | 75.0 | 80.0 | |
| Interface size | DN150 | DN200 | DN250 | ||||||||
| Condenser | Type | High efficiency fin type heat exchanger | |||||||||
| Fan quantity | 12 | 16 | 16 | 20 | 20 | 24 | 24 | 24 | 32 | 32 | |
| Stand-alone power | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.7 | 1.8 | 1.8 | 1.8 | 1.9 | |
| Refrigerant | Type | R22 | |||||||||
| Refrigerant volume(kg) | 140.0 | 170.0 | 180.0 | 200.0 | 210.0 | 220.0 | 260.0 | 280.0 | 300.0 | 340.0 | |
| Overall dimensions | Length(mm) | 6500 | 8000 | 8000 | 12000 | 12000 | 14500 | 14500 | 15200 | 16000 | 16000 |
| Width(mm) | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | |
| Height(mm) | 2450 | 2450 | 2450 | 2350 | 2350 | 2350 | 2450 | 2300 | 2350 | 2450 | |
| Weight | Machine weight(kg) | 6750 | 7650 | 7950 | 11000 | 12500 | 13000 | 14500 | 15500 | 15900 | 16200 |
| Operating weight(kG) | 7050 | 7950 | 8250 | 11300 | 12800 | 13300 | 14800 | 15800 | 16200 | 16500 | |
Cooling condition: Cooling water inlet/outlet temperature 12/7 ℃, ambient dry bulb temperature 35℃
Heating condition:How water outlet temperature 45℃, ambient dry bulb temperature 7℃, ambient wet bulb temperature 6℃
Chemical, chemical fiber, plastic, oil, food, pharmaceutical, military, printing, painting, electroplating, electronics and other industries
Service
Pre-sale services
FAQ
1. Professional and technical consultation and communication.
2. Equipment selection and quotation.
3. Product application solutions recommendations.
4. Engineering solutions.
After-sale services
Warranty: 12 months guarantee for all products.
Within warranty, any problem caused by the defects of the machine itself, we will offer its service until the problem solved.
Over warranty, we will offer maintenance activity by cost only.
Q: How to choose air cooled system or water cooled system? Air cooled is better or water cooled is better?
A: In terms of installation simplicity, the air cooled system is more convenient than the water-cooled system and does not need to connect cooling towers. The water cooled system needs to be connected to the cooling tower then it can run. In terms of energy efficiency, the water cooled system has higher energy efficiency than the air cooled system. Specifically, according to your environment and situation, engineers will design an optimization plan for you.
Q: What is the outlet temperature of your chiller?
A: -55 to 15 centigrade.
Q: What’s payment terms?
A: 50% as deposit, 50% before delivery by T/T, Western Union and Paypal is our regular payment terms. D/P, L/C need to have a discussion.
Q: What is the warranty of water chiller?
A: The standard warranty is 12 months.
Q: What is the delivery time?
A: Usually around 30 days.
Products
TOP
Mobile phone quick desktop
Supplier portal Website:www.x-cloud.com/supplier
© 1999-2015 x-cloud.com. All rights reserved. 沪ICP备12049434号-2