1．Material Specification ：0.48-1.0mm GI sheet，Strength yield≤550mpa

2．De-coiler mode：3T manual de-coiler

3． Main motor power：7.5KW

4． Working speed：10-15mm/min

5．Roller steps：16 horizontal rollers and a series of vertical rollers.

6．Main shaft diameter：70mm

7．Machine structure：Wallboard type，single row 1.2 inches chain drive

8．Roller material：High quality GCR15 quenching treatment HRC 58-62. The rollers after quenching treatment and do the secondary processing, which can guarantee the roller accuracy and remove the rollers deformation after quenching treatment.

9．Control system：Panasonic PLC control system

10. Machine rack uses 450U-steel, location on two sides.

11. Cutting mode：flying saw following cutting mode after forming

B Production technology process

De-coiler ---- guide feeding ----- forming ----- Sizing（3 rollers + rotation）--- Die press out ----flying saw following cutting ---- output

Seaming-type elevating machine barrel production line

Function: Bite mouth hoist drum production line
Profile: Seaming-type elevating machine barrel production line consists of 14 parts: down machine, leveling, forming, pinch about feed machine, leveling, about forming, pinch combination bite and blanking gap, correction, shear, discharge, electric controlling system and hydraulic system of 14parts. The most obvious feature of the production line lies in the simultaneously feeding of 4 plates, qualified machine barrel can be automatically produced by the process of seaming, cutting and other processes. The application of this machine can immensely improve the production efficiency, the whole line can be operated by only one or two man, so as to reduce the running cost & create the value for clients.
Production capacity: Can produce bite mouth hoist drum;