1.Decoiler：Hydralic decoiler,
2.Weight capability of decoiler: 10T
3.Characteristic of decoiler: hydraulic-umbrella stand,the blocks extend
4.Power of motor of decoiler: 5.5KW
5.Power of hydraulic decoiler expansion: 2.2KW
6.Inner diameter of coil (ID): φ508mm,φ610mm
7.Outer diameter of coil (ID): φ1500mm
8.Width of coil: 1250mm
9.Material of coil: galvanized sheet, color steel sheet
10.Hydraulic pressure of decoil:10MPa
11.Machine stand adopts welded steel structure with shot blasting treatment
12.Locating of movable station：fixed by square key and screw
13.Bearing of fixed station：taper bearing installed in pairs
14.Stand type for guide feeding：side trolley type
15.Type of forming machine：single station with chain transmission
16.Specification of single station: WHPF40
17.Leader: ￠40㎜
18.Diameter of roller shaft：￠80mm(thermal refining)
19.Diameter of bearing assembly hole: ￠60㎜
20.Chain: 16A single row
21.Main motor power：5.5kw
22.Forming speed：1.5m/min(including stamping and cutting step)
23.Roller station：19 stations
24.Material of shaft：45# forging steel(thermal refining)
25.Surface of roller coated with chrome of 0.05mm thickness
26.Motor of hydraulic station：5.5kw
27.Hydraulic oil pump：gear pump CB-E314
28.Type of mould: hydraulic stamping mould
29.Step height of stamping: 15mm
30.Raw material intensity: Q235
31.Material of stam ping mould: 40Cr, with nitrification
32.Cutting: Hydraulic cutting
33.Material of cutter : Cr12
34.Heat treatment of blade: HRC58°-60°
35.Thickness of material：0.5-0.6mm
36.Coil width:1200mm
37.Tolerance of product length：±2mm
38.Type of output table: revolving cylinder(unpowered)
39.Type of transducer：Hongquan, Taiwan
40.Computer adopts PLC，Omron Series
41.Pressure of hydraulic system:12MPa
42.Computer operating board adopts Xinjie OP320A

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

• 
• 
• 
•