RELATED SPECIFICATIONS:
Europe | EN 1.2344 |
Germany | DIN X40CrMoV5-1 |
Great Britain | BS 4659 BH13 |
USA | AISI H13A |
Japan | JIS-SKD61 |
DESCRIPTION:
Hot worked tool steel with good tensile and wear resistance properties.
APPLICATIONS:
General purpose hot worked tool steel used in a wide range of applications - Aluminium extrusion
dies, backers and bolsters, stems and mandrels, die casting dies and forging inserts.
TYPICAL CHEMICAL ANALYSIS:
C | Si | Mn | Cr | Mo | V | P | S |
0.32-0.45 | 0.8-1.2 | 0.2-0.5 | 4.75-5.50 | 1.10-1.75 | 0.85-1.20 | 0.03 max. | 0.03 max. |
HARDENING:
Hardening should be done in controlled atmosphere, vacuum or fluidised bed furnaces. Preheat slowly to 450/800°C then raise to 1000/1030°C, holding for sufficient time to attain uniformity
throughout the tool, air cool.
TEMPERING:
Tempering should be carried out immediately after air quenching. Heat to 550/650°C, holding for one to three hours. Tools benefit from multitempering and a minimum of two tempers is recommended. Care should be taken to ensure tools cool to room temperature in between tempers. Also suitable for both bath and gas nitriding.
SIZES AVAILABLE:
Round: 20mm - 640mm
Flat: Thickness ≤ 1000mm
Forgings also available for stems, containers and inner linings.