Top brand Construction
Machinery supplier
Guess you like the video
X43H H-Type Strainer
Technical Data
X43H H-Type Strainer
Size range: DN50~300 NPS 2"~12"
Pressure ratings: PN16 / 150LB
Working temperature:-29°C ~ +200°C.
Suitable Medium: Process Industry Power Industry, Chemical Industry,Oil and Gas, Pulp and Paper,Metals and Mining, Water and Waste.
Body Material: Ductile Iron
Screen Materia: A276 SS304
Mesh:As per purchaser
X43H H-Type Strainer general situation

The DREAMAX X43H H-Type Strainer offers an effective means of removing unwanted solid particles in pipeline flow. These strainers are ideal for preventing fouling, debris and particle buildup in DREAMAX Automatic Control Valves. The large flow area design, with a flat stainless steel strainer mesh perpendicular to flow, is optimized for low pressure drop applications.


Maintenance is fast and easy with the compact H-Type, requiring service without removal from line. Routine maintenance requires only removal of the top cover and removing unwanted solid particles and debris from strainer body and wire cloth mesh screen. The strainer may be installed in any position, however, installation with cover up is recommended.

Feature

1.Protects valves and equipment from pipeline debris.
2.Low cost.
3.Ductile iron construction standard.
4.Fusion bonded epoxy coating standard.
5.Available in 150# and PN16 classes.
6.High Quality stainless steel screen; made out of high resistance wire, rugged and braided type. Thick enough to avoid deformation.
7.Equipped with a plug on both sides of the unit that can be used for a drain or flush valve.
8.Top cover can be easily removed for cleaning.
9.Requires less space: Does not extend below pipe, making it ideal for locations where it is required that the piping be installed at or near floor level, unlike a standard Y-Strainer which requires additional space to accommodate strainer's profile.

Performance Standard
1.Design & Manufacture standard as to: PED 97/23/CE ASME B16.34
2.Face to Face dimension standard as to: MFR-STD
3.Flange dimension conforms as to: BS EN 1092-2  (PN16) ASME B16.5   (150LB)
4.Testing And Inspection as to: EN 12266-1 / BS6755 Part 1
5.Pressure-temperature conforms as to: BS EN 12516-1 ASME B16.34
TOP
×
Login

Not a member yet? Create an account

I'am a supplier Login
×
Register

Already got an account? Login

Become a supplier Register