Top brand Construction
Machinery supplier
Guess you like the video
VHL-270G
Description
Virtueholder VHL-270G is a special 1 mil (25µ) polyimide film with a high-temperature permanent pressure sensitive acrylic adhesive and a high opacity, gloss white topcoat specifically designed for thermal transfer printing. Using a 1 mil vs. a 2 mil polyimide film base offers polyimide thermal performance at less cost.
Virtueholder VHL-270G is specifically designed for high-temperature-lead-free solder applications. It is the ideal label to withstand surface mount board processes, on either the top or bottom side of the board. It can also be used on the top side of the board in mixed processes, and is recommended for the bottom side which is directly exposed to the wave solder environment. XF- 581 is particularly useful in manufacturing processes where dimensional stability of the label is critical.
Properties
• The VHL-270G topcoat, in combination with the appropriate thermal transfer ribbon, passes the requirements of MIL-STD-202G, Notice 12, Method 215K and MIL-STD-883E, Notice 4, Method 2015.13. The print resists smearing, even when the board and label are directly removed from a reflow or wave solder environment. Preheating the labeled product can further enhance print permanence in the case of extreme solvent and/or abrasion exposure, although this is not typically required for board processing applications.

PROPERTIES

TEST METHODS

AVERAGE RESULTS



USA Units

SI Units

Thickness

ASTM D1000



-Substrate


0.0015 inch

0.038 mm

-Adhesive


0.0010 inch

0.025 mm

-Total


0.0025 inch

0.063 mm





Adhesion

Virtueholder 80313



-Stainless Steel

20 minute dwell

> 27 oz/in

30N/100 mm


24 hour dwell

> 30 oz/in

33N/100 mm





Tack

Virtueholder 80155





> 1000 g/in


Temperature Rating:

-40 to 1000ºF (-40 to 537ºC)

Shelf Life

1 year below 80ºF (27ºC) and 60% R.H.

UL File #

PGJI2.MH19503

UL tested ribbons

Ricoh B110CR, Armor AXR 7+, Union Chemicar US 300, Japan Pulp & Paper JPP1, DNP R510, Sony 4070

• All Sl units are mathematically derived from U.S. conventional units.
• Labels printed with recommended thermal transfer ribbon. Labels printed with 6.7 mil X dimension bars at 2:5 ratio. Labels exposed to indicated environments.

Properties

Test Methods


Test Environment

PCS'¹

Read Rate²

Heat / Chemical

Virtueholder

Control


99%

100%



Alpha Metals Inc. 2110 Saponifier 6% aqueous, 65- 70ºC,
5 minutes

97%

100%



Isopropanol 99%, 82ºC, 5 minutes

99%

100%



KyzenXJN 30%, 5 min.

99%

100%

• 1 PCS - Print Contrast Signal. PCS determined with Quick Check 650, 0.005" aperture, 660 nm wavelength. Quick Check 650 manufactured by : Photographic Sciences Corp.
• 2 Read rate determined using a PSC Quick Check 850 laser scanner

Properties

Test Method

Test Fluid

Results

Chemical Resistance

MIL-STD-202G, Notice 12, Method 215K MIL-STD-883E, Notice 4, Method 2015.13





Solvent A-1part IPA, 3 parts Mineral Spirits

No visible effect



Solvent B- 1,1,1 Trichloroethane

Solvent deleted per notice 12



Solvent C- Terpene Defluxer

No visible effect



Solvent D- Saponifier

No visible effect


Note. All values shown are averages and should not be used for specification purposes. Adhesion and tack values have a 10% tolerance allotted to the above values stated. Test data and test results contained in this document are for general information only and shall not be relied upon by Virtueholder customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Virtueholder for further information.
Warranty-Limitation
• Virtueholder’ products are sold with the understanding that the Buyer will test them in actual use and determine for him/herself their adaptability to his/her intended uses. Virtueholder warrants to the buyer that its
products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the products shown to Virtueholder’ satisfaction to have been defective, provided that the Buyer has complied with the handling, storage and shelf life requirements as specified by Virtueholder in applicable materials specifications.

• The above warranties extend solely to Buyer and all warranty claims must be made by Buyer. Rework or Replacement shall neither extend nor decrease the original warranty period. The term of all warranty periods shall not exceed thirty (30) days from the date of the original shipment.

THE ABOVE WARRANTIES ARE EXCLUSIVE OF AND IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, STATUTORY OF OTHERWISE. NO IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. Virtueholder SHALL NOT BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL OR CONSEQUENTIAL, ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, OR FROM DELAY IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE WARRANTY.
TOP
×
Login

Not a member yet? Create an account

I'am a supplier Login
×
Register

Already got an account? Login

Become a supplier Register