0-12m/min working speed roof batten roll forming machine

0-12m/min woring speed roof batten roll forming machine

Technical Data

Item NO	Description	Offered specification
1.1	Rolling speed	0-12m/min(not include cutting time)
1.2	Rolling thickness	0.4 mm to 1.0mm Galvanized coils
1.3	Main motor	5.5 KW
1.4	PLC	Delta Brand
1.5	Dimension	About 5000×435×1000(mm)
1.6	Voltage	220V, 60HZ, 3phase
1.7	Roller stations	About 13 stations
1.8	Roller material	45# high grade steel with quenching
1.9	Shaft diameter	Φ50mm ,material is 45# forge steel
1.10	Transmission	By chain One inch chain
1.11	Material of chain	45# forged steel with frequency quenching
1.12	Material of cutting	Cr12Mov with quench HRC58-62°
1.13	Tolerance	6m+-1.5mm

Advantages:

1. the control box and the hydraulic station for the cutting are all put under the bedding, when you get the machine, the machine is one unit, no need to assemble

and connect the complicate cable of the machine, you only need to connect one main cable, then the machine is working.

2. the touch screen is hang over, it is not under the floor.

3. the accuracy of our machine is -/+0.5-1mm.

4. the roller is solid and electroplated, which will not have rust.

5. the material are all national standard and cutter will not have burr.

6. the board are all milled and polished.

7. the roller is solid and galvanized

8. our machine is a little heavy than others, because it have more stands

Machine pictures

Products