W-TEL-ODC-series Outdoor cable system ODC cable system Structure Features: The fibers are positioned in a loose tube,The tubes are filled with a water-resistant filling compound.The tube is wrapped with a layer of PSP longitudinally; Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape;The cable is completed with a polyethylene(PE) sheath. Technical Features: the special method of controlling optical fiber excess length and cabling method for superior mechanical and environmental performance; Special water-blocking filling compound  ensure the cross section water-blocking; PSP enhancing moisture-proof; Compact structure,light weight, steel tape armored,excellent crush-resistant performance; Bullet-resistant. Technical Parameters: Fiber Counts Outer diameter (MM) Weight (KG) Allowed hort-time Pulling (N) Allowed Crush (N/100mm) Lmpact (N．m） AllowedBending Radius Static   Dynamic 2-12 9.8 -10.5 105-125 ≥3000 ≥3000 10 10D     20D D=Cable diameter Transmission Characteristics: Single-mode fiber 50/125 62.5/125 1310/1550(NM) 850/1300(NM) 850/1300(N/M) Attenuation (db/KM) ≤0.36/0.22 ≤3.0/1.0 ≤3.3/1.0 Bandwidth (MHz﹒km) ≥500/1200 ≥200/600 GYXTW Unitube armored Cable                                      GYXY Unitube Non-armored Cable GYFXY Unitube Non-metallic Non-armored Cable         GYTS Layer Stranded Loose Tube armored Cable GYTA Layer Stranded Loose Tube Armored Cable          GYFTY Layer Stranded Loose Non-armored Cable GYFTS Loose Tube Stranded Cable With Non-metal     GYTA53 Layer Loose Tube Armored Cable Central Strength Member And Steel Tape ADSS All Dielectric Self Supporting Optical Cable            Waterproof Cable

IDC cable system The optical fiber unit is positioned in the center, two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then the cable is completed with a black or color LSZH sheath. Characteristic: Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property; Two parallel strength members ensure good performance of crush resistance to protect the fiber; Simple structure, light weight and high practicability; Novel flute design, easily strip and splice, simplify the installation and maintenance. Geometrical Characteristics: Fiber Core 1 2 1 4 Cable Dimension(mm) 2.0×3.0 2.0×3.1 2.0×3.8 2.0×4.0 Cable Weight(kg/km) 8 8.5 9 10 Mechanical Characteristics: Tensile strength(N) Long Term 30 Short Term 60 Crush resistance(N/100mm) Long Term 300 Short Term 1000 Bending Radius(CM) Dynamic 30 Static 15 Transmission Characteristics: SMF 50/125 62.5/125 1310/1550（nm） 850/1300(nm) 850/1300(nm) Attenuation(dB/km) ≤0.40/0.30 ≤3.5/1.5 ≤3.5/1.5 Minimum Bandwidth (MHz·km) Bandwidth(MHz·km) Bandwidth(MHz·km) --------- ≥500/1000 ≥200/600 Environmental Characteristics: Storage Operating Temperature -20℃~+60℃ FTTH Indoor Cable                                                  Tight Buffer Fiber Cable FTTH Drop cable                                                   Simplex Cable Zipcord Cable                                                   Distribution Cable Flat Twin Fiber Cable                                      Break-out Cable

Summary: The terminal box is used to direct, terminal or branching connection of the fiber. Features: Optical termination box has the following features: The splice of optical cable or fiber can be finished individually in the terminal box. It may inlet and outlet not only from optical cable to optical cable but also form optical cable to pigtail. The capacity of terminal box may vary from 12 to 96 Cores: There is reliable optical cable fixing and ground protection device and sealing device. Terminal box type 1 Features • It is applicable for FTTH, FTTO and FTTD, etc. • The clasp design of the cover has greatly reduced the installation strength. It is very thin and matches with other A86 panels in homes, and also meet the open or concealed cabling for optical cables. • Coordinating with FC strip-type optical adapter, it generates more options in term of fiber interfaces for users, SC, LC and SC/FC are all available. • The big-diameter wrapping post in the box protects radically in an omnibearing way. Terminal box type 2 This type optical fiber terminal box is light and compact, especially suitable for protective connection of fiber cables and pigtails in FTTH Features • This box could be used for wall-mounted and rack-mounted application; • The base and cover of the box adopts ”self-clip” method, which is easy and convenient to open and close; • Could be used for adapters such as SC,FC,E2000; • The max capacity is 4 fibers; Specifications • Environmental temperature:-25℃~ +40℃; • Max Capacity:4 fibers; • Suitable types of fiber cables: 4 fiber indoor fiber cables. Terminal box type 3 Applications • Widely used in FTTH Network. • Telecommunication Networks • CATV Networks • Data communications Networks • Local Area Networks Features • Standard user interface, be made of high impact plastic • Easy operation and maintenance • Can accommodate 1×8 or 1×4 PLC splitter • Anti-UV, Ultra Violet resistant and rainfall resistant • Wall and pole mountable. • 2 inlet ports，8 outlet ports for ordinary cable or drop cable Terminal box type 4 Technical characteristic: Steel work of the resistance of the optical cable of the dielectric box of the completion and between the wick of the enhancement of the metal of the optical cable, the steel work of the optical cable, the steel work of the optical cable and the dielectric resistance of the place is greater than 2X104M (the test voltage is 500VDC) . Furze electrical: Between steel work of the box of the completion of the optical cable and the base of the enhancement of the metal of the cable and ground, 1min works under 15KV of the C.C voltage does not penetrate the excessive phenomenon of the not-arc.  radio of the optical cable, and the one of optical fiber to being greater than 45mn: • 20 the life on watch 20 years Fiber Optic Cable Terminal Box : Conditions of work: • ambient Temperature -25℃-+40℃ • Humidity relativa≤85% (+30℃) • Pressure atmospheric: 70~106Kpa Terminal box type 5 Summary: The optical fiber terminal box is used to connect small capacity optical cables and terminals; it has the function of it, splice and optical fiber connection. Features: Optical termination box has the following features: 19" Standard rack mount can be installed on any 19''rack and frames. The capacity of terminal box may vary from 12 to 96 cores. The largest capacity can up to 144 if use ribbon optical cable. The splice of optical cable or fiber can be finished individually in the terminal box. It may inlet and outlet not only from optical cable to optical cable but also form optical cable to pigtail. The capacity of terminal box may vary from 12 to 48 cores. There is reliable optical cable fixing and ground protection device and sealing device. Technical characteristics: Atmospheric pressure: 70 to 106kpa Insulation resistance: >2 x 10m

Fiber patch panel system 1.Each port of this Cat.6 FTP patch panel has the same unaided cabling structure ,it will make sure that the performance of each port consistent. 2.The cable management and grounding device are combined in this patch panel. All kind of cables with different dimensions can be fixed on the patch panel. The shielding foil of the cables and the grounding device of the patch panel can be connected very well so that the shielding effect of this patch panel will be very outstanding. 3.According to the standard of ISO/IEC 11801:2002 CLASS E and ANSI/TIA/EIA/568-B.2-1 Cat6 Standard ,the T568A and T568B color cord are printed both on the PCB and IDC surface to give a correct guide when a engineer punch the cables. Fitting foe horizontal distribution in the equipments room and equipments connecting. 4.Connecting: RJ45 port for Cat6 FTP patch cord and IDC for horizontal distribution cables 5.Environmentalist requirement; in accord with the ROHS requirement. 6.Compatibility: compatible for all kinds of Cat6.Cat5e and Cat5 system. 7.Entire steel outer frame, with plastic powder cladding(non-electric part) and zincification cladding (shielding parts) 8.RJ45 jack: PBT frame with 50u golden phosphor bronze pins; shielding shell of the RJ45jack: brass housing with nickel-plated. IDC clip: Tinned phosphor bronze pins. 9.Testing conduction of transmitting capability: 250MHz Patch Panel catalog