Mobile crane, is to use Mobile chassis walk arm of the rotating crane. Mobile crane is installed in the lifting institutions add heavy axle tyres and composed of special chassis a kind of full rotary cranes, its upper structure and crawler crane basic same, in order to ensure the installation work time the stability of the body, crane with four retractable a leg. In flat on the ground can need not a leg up on small weight lifting and crane content low speed driving. It consists of getting on and off two parts. Get on the bus for lifting operation part, arm, with lifting me. luffing mechanism, the balance weight and turntable, etc.; Get off for supporting and walk part. On and off the bus with rotary bearing connection between. Hanging heavy usually takes a leg when put down, increase the bearing surface, and will the leveling of the fuselage, to ensure the stability of the crane. Compared with the crane the advantages are: between wider, good stability, automobile body, short turning radius small,can in 360 ° work within. But its down the road to the demand is higher, speed is slow, not suitable for car type on the soft ground in the muddy. The development trend of Mobile crane is: large-scale, high efficiency, safety, ease self-respect, and to further improve the performance and driving mobility lifting. Feature:

Product Description Item 316 Seamless Stainless Steel Tube Grade 300 series, Grade 316 Brand Name TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc. Size Outside Diameter 6-630mm Wall Thickness 0.24-30mm Length Less Than 12 Meter Surface Finish Bared, Painted, Galvanized, With Oiled, 3 PE, FBE, corrosion resistant coating Ends Plain, Beveled, Thread with Coupling or cap Technique ERW,EFW DSAW Standard BS EN10296,BS EN10025,BS EN10297,BS6323, BSEN10219,BSEN10217,GB/T13793-1992,GB/T14291-2006, GB/T3091-1993,GB/T3092-1993,GB3640-88,ASTM A53/BS1387 MOQ 1 Metric TON Package Bundle, In Bulk, PE clothes,Clients' Requirements Terms of Delivery FOB,CFR,CIF,CNF,EXWORK Port of Shipment Shanghai Port,China Delivery Time According to the quantity and specification of each order Terms of Payment L/C ,T/T(30% deposit) Packing Standard export sea-worthy packing Stock In stock Chemical Composition Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 316 0.03 1.00 2.00 0.045 0.03 12.0-15.0 16.0-18.0 Physical Property Grade YS (MPa) TS (MPa) Elongtion HRB 316 ≥170 ≥485 ≥30 ≤90

Product Description Item 304L Stainless Steel Round Pipe Grade 300 series, Grade 304L Brand Name TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc. Size Outside Diameter 6-630mm Wall Thickness 0.24-30mm Length Less Than 12 Meter Surface Finish Bared, Painted, Galvanized, With Oiled, 3 PE, FBE, corrosion resistant coating Ends Plain, Beveled, Thread with Coupling or cap Technique ERW,EFW DSAW Standard BS EN10296,BS EN10025,BS EN10297,BS6323, BSEN10219,BSEN10217,GB/T13793-1992,GB/T14291-2006, GB/T3091-1993,GB/T3092-1993,GB3640-88,ASTM A53/BS1387 MOQ 1 Metric TON Package Bundle, In Bulk, PE clothes,Clients' Requirements Terms of Delivery FOB,CFR,CIF,CNF,EXWORK Port of Shipment Shanghai Port,China Delivery Time According to the quantity and specification of each order Terms of Payment L/C ,T/T(30% deposit) Packing Standard export sea-worthy packing Stock In stock Chemical Composition Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 304L 0.08 0.75 2.00 0.045 0.03 8.00-11.00 18.00-20.00 Physical Property Grade YS (MPa) TS (MPa) Elongtion HRB 304L ≥205 ≥520 5 (%)≥40% ≤90

Product Description Item 904L Welded Stainless Steel Pipe Brand Name TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc. Size Outside Diameter 21.3-219mm Wall Thickness 1.4-8mm Length Less Than 12 Meter Surface Finish Bared, Painted, Galvanized, With Oiled, 3 PE, FBE, corrosion resistant coating Ends Plain, Beveled, Thread with Coupling or cap Technique ERW,EFW DSAW Standard BS EN10296,BS EN10025,BS EN10297,BS6323, BSEN10219,BSEN10217,GB/T13793-1992,GB/T14291-2006, GB/T3091-1993,GB/T3092-1993,GB3640-88,ASTM A53/BS1387 MOQ 1 Metric TON Package Bundle, In Bulk, PE clothes,Clients' Requirements Terms of Delivery FOB,CFR,CIF,CNF,EXWORK Port of Shipment Shanghai Port,China Delivery Time According to the quantity and specification of each order Terms of Payment L/C ,T/T(30% deposit) Packing Standard export sea-worthy packing Stock In stock Chemical Composition Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 904L 0.08 0.75 2.00 0.045 0.03 8.00-11.00 18.00-20.00 Physical Property Grade YS (MPa) TS (MPa) Elongtion HRB 904L ≥205 ≥520 5 (%)≥40% ≤90

Product Description Item 310S Stainless Steel Round Pipe Grade 300 series, Grade 310S Brand Name TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc. Size Outside Diameter 6-630mm Wall Thickness 0.24-30mm Length Less Than 12 Meter Surface Finish Bared, Painted, Galvanized, With Oiled, 3 PE, FBE, corrosion resistant coating Ends Plain, Beveled, Thread with Coupling or cap Technique ERW,EFW DSAW Standard BS EN10296,BS EN10025,BS EN10297,BS6323, BSEN10219,BSEN10217,GB/T13793-1992,GB/T14291-2006, GB/T3091-1993,GB/T3092-1993,GB3640-88,ASTM A53/BS1387 MOQ 1 Metric TON Package Bundle, In Bulk, PE clothes,Clients' Requirements Terms of Delivery FOB,CFR,CIF,CNF,EXWORK Port of Shipment Shanghai Port,China Delivery Time According to the quantity and specification of each order Terms of Payment L/C ,T/T(30% deposit) Packing Standard export sea-worthy packing Stock In stock Chemical Composition Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 310S 0.08 0.75 2.00 0.045 0.03 8.00-11.00 18.00-20.00 Physical Property Grade YS (MPa) TS (MPa) Elongtion HRB 310S ≥205 ≥520 5 (%)≥40% ≤90

Product Introduction Product name 321 HR CR Stainless Steel Sheet Specification Thickness: Cold rolled: 0.3-3mm; Hot Rolled: 3-120mm Width: 0-2000mm Length: 0-6000mm Customized sizes are accepted Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Finish NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish and so on Material 201, 202, 304, 304L, 310S, 316, 316L, 410, 420, 430, 441, 800H, 904L Brand Name TISCO, Baosteel, LISCO, JISCO Place of Origin Jiangsu of China (Mainland) Technical treatment Cold Rolled, Hot Rolled MOQ 1 Metric Ton Port of Loading Shanghai or as your requirement Terms of Delivery FOB, CFR, CIF, CNF, EXWORK Terms of Payment L/C, T/T (30% deposit) Packing Standard export sea-worthy packing Delivery time Within 7-15 days after recieve 30% deposit or as your requirement Stock In stock Chemical Element Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 321 0.08 1.00 2.00 0.045 0.03 9.0-13.0 17.0-19.0 Physical Property Grade YS (MPa) TS (MPa) Elongtion HRB 321 205 520 40 90

Product Introduction Product name 310S Stainless Steel Sheet Specification Thickness: Cold rolled: 0.3-3mm; Hot Rolled: 3-120mm Width: 0-2000mm Length: 0-6000mm Customized sizes are accepted Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Finish NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish and so on Material 201, 202, 304, 304L, 310S, 316, 316L, 410, 420, 430, 441, 800H, 904L Brand Name TISCO, Baosteel, LISCO, JISCO Place of Origin Jiangsu of China (Mainland) Technical treatment Cold Rolled, Hot Rolled MOQ 1 Metric Ton Port of Loading Shanghai or as your requirement Terms of Delivery FOB, CFR, CIF, CNF, EXWORK Terms of Payment L/C, T/T (30% deposit) Packing Standard export sea-worthy packing Delivery time Within 7-15 days after recieve 30% deposit or as your requirement Stock In stock Chemical Element Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 310S 0.08 1.50 2.00 0.045 0.03 19.0-22.0 24.0-26.0 Physical Property Grade YS (MPa) TS (MPa) Elongtion HRB 310S 205 520 40 90

Product IntroductionProduct Introduction Product name 304L Stainless Steel Sheet Specification Thickness: Cold rolled: 0.3-3mm; Hot Rolled: 3-120mm Width: 0-2000mm Length: 0-6000mm Customized sizes are accepted Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Finish NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish and so on Material 201, 202, 304, 304L, 310S, 316, 316L, 410, 420, 430, 441, 800H, 904L Brand Name TISCO, Baosteel, LISCO, JISCO Place of Origin Jiangsu of China (Mainland) Technical treatment Cold Rolled, Hot Rolled MOQ 1 Metric Ton Port of Loading Shanghai or as your requirement Terms of Delivery FOB, CFR, CIF, CNF, EXWORK Terms of Payment L/C, T/T (30% deposit) Packing Standard export sea-worthy packing Delivery time Within 7-15 days after recieve 30% deposit or as your requirement Stock In stock Chemical Element Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 304L 0.08 1.00 2.00 0.045 0.03 8.0-10.5 18.0-20.0 Physical Property Grade YS (MPa) TS (MPa) Elongtion HRB 304L 205 520 40 90

Product Introduction Product name 410S HR CR Stainless Steel Sheet Specification Thickness: Cold rolled: 0.3-3mm; Hot Rolled: 3-120mm Width: 0-2000mm Length: 0-6000mm Customized sizes are accepted Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Finish NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish and so on Material 201, 202, 304, 304L, 310S, 316, 316L, 410, 420, 430, 441, 800H, 904L Brand Name TISCO, Baosteel, LISCO, JISCO Place of Origin Jiangsu of China (Mainland) Technical treatment Cold Rolled, Hot Rolled MOQ 1 Metric Ton Port of Loading Shanghai or as your requirement Terms of Delivery FOB, CFR, CIF, CNF, EXWORK Terms of Payment L/C, T/T (30% deposit) Packing Standard export sea-worthy packing Delivery time Within 7-15 days after recieve 30% deposit or as your requirement Stock In stock Chemical Element Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni≤ Cr 410S 0.08 1.00 1.00 0.04 0.03 0.06 11.5-13.5 Physical Proprety Grade YS (MPa) TS (MPa) Elongtion HRB 410S 205 410 20 88

Product Introduction Product name 321 Hot Rolled Stainless Steel Coil Specification Thickness: Cold Rolled: 0.3-3mm Hot Rolled: 3-120mm Width: 0-2000mm Length: 0-6000mm Customized sizes are accepted Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Finish NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish and so on Material 201, 202, 304, 304L, 310, 316, 316L, 410, 420, 430, 441, 800H, 904L Brand Name TISCO, Baosteel, LISCO, JISCO Place of Origin Jiangsu of China (Mainland) Technical treatment Cold Rolled, Hot Rolled MOQ 1 Metric Ton Port of Loading Shanghai,or as your requirement Terms of Delivery FOB, CFR, CIF, CNF, EXWORK Terms of Payment L/C, T/T (30% desipot) Packing Standard export sea-worthy packing Delivery time Within 7-15 days after recieve 30% desipot or as your requirement Stock In stock Chemical Elements Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 201 0.12 0.75 7.00 0.045 0.045 1.00-1.28 13.70-15.70 202 0.15 1.00 2.25 0.045 0.045 4.07-4.17 14.00-16.00 301 0.15 1.00 2.00 0.045 0.03 6.00-8.00 16.00-18.00 302 0.15 1.00 2.00 0.045 0.03 8.00-10.00 17.00-19.00 304 0.035 0.75 2.00 0.045 0.03 8.00-13.00 18.00-20.00 309 0.15 0.75 2.00 0.045 0.03 12.00-15.00 22.00-24.00 309S 0.08 1.00 2.00 0.045 0.03 12.00-15.00 22.00-24.00 310 0.08 1.50 2.00 0.045 0.03 19.00-22.00 24.00-26.00 316 0.08 1.00 2.00 0.045 0.03 10.00-14.00 16.00-18.00 316L 0.035 0.75 2.00 0.045 0.03 10.00-15.00 16.00-18.00 321 0.04-0.10 0.75 2.00 0.045 0.03 9.00-13.00 17.00-20.00 409 0.089 1.00 1.00 0.045 0.05 ≤0.06 10.50-11.75 410 0.15 0.75 1.00 0.045 0.03 ≤0.06 11.5-13.5 420 0.16-0.25 1.00 1.00 0.040 0.03 ≤0.06 12.00-14.00 430 0.12 0.75 1.00 0.045 0.03 ≤0.06 16.00-18.00 430A 0.06 0.05 0.05 0.030 0.50 ≤0.25 14.00-17.00 Physical Proprety Grade YS (MPa) TS (MPa) Elongtion HRB Max 321 205 520 40 90

Product Introduction Product name 316L HR CR Stainless Steel Coil Specification Thickness: Cold Rolled: 0.3-3mm Hot Rolled: 3-120mm Width: 0-2000mm Length: 0-6000mm Customized sizes are accepted Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Finish NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish and so on Material 201, 202, 304, 304L, 310, 316, 316L, 410, 420, 430, 441, 800H, 904L Brand Name TISCO, Baosteel, LISCO, JISCO Place of Origin Jiangsu of China (Mainland) Technical treatment Cold Rolled, Hot Rolled MOQ 1 Metric Ton Port of Loading Shanghai,or as your requirement Terms of Delivery FOB, CFR, CIF, CNF, EXWORK Terms of Payment L/C, T/T (30% desipot) Packing Standard export sea-worthy packing Delivery time Within 7-15 days after recieve 30% desipot or as your requirement Stock In stock Chemical Elements Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 201 0.12 0.75 7.00 0.045 0.045 1.00-1.28 13.70-15.70 202 0.15 1.00 2.25 0.045 0.045 4.07-4.17 14.00-16.00 301 0.15 1.00 2.00 0.045 0.03 6.00-8.00 16.00-18.00 302 0.15 1.00 2.00 0.045 0.03 8.00-10.00 17.00-19.00 304 0.035 0.75 2.00 0.045 0.03 8.00-13.00 18.00-20.00 309 0.15 0.75 2.00 0.045 0.03 12.00-15.00 22.00-24.00 309S 0.08 1.00 2.00 0.045 0.03 12.00-15.00 22.00-24.00 310 0.08 1.50 2.00 0.045 0.03 19.00-22.00 24.00-26.00 316 0.08 1.00 2.00 0.045 0.03 10.00-14.00 16.00-18.00 316L 0.035 0.75 2.00 0.045 0.03 10.00-15.00 16.00-18.00 321 0.04-0.10 0.75 2.00 0.045 0.03 9.00-13.00 17.00-20.00 409 0.089 1.00 1.00 0.045 0.05 ≤0.06 10.50-11.75 410 0.15 0.75 1.00 0.045 0.03 ≤0.06 11.5-13.5 420 0.16-0.25 1.00 1.00 0.040 0.03 ≤0.06 12.00-14.00 430 0.12 0.75 1.00 0.045 0.03 ≤0.06 16.00-18.00 430A 0.06 0.05 0.05 0.030 0.50 ≤0.25 14.00-17.00 Physical Proprety Grade YS (MPa) TS (MPa) Elongtion HRB Max 316L 175 480 40 90

Product Introduction Product name 310 Hot Rolled Stainless Steel Coil Specification Thickness: Cold Rolled: 0.3-3mm Hot Rolled: 3-120mm Width: 0-2000mm Length: 0-6000mm Customized sizes are accepted Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Finish NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish and so on Material 201, 202, 304, 304L, 310, 316, 316L, 410, 420, 430, 441, 800H, 904L Brand Name TISCO, Baosteel, LISCO, JISCO Place of Origin Jiangsu of China (Mainland) Technical treatment Cold Rolled, Hot Rolled MOQ 1 Metric Ton Port of Loading Shanghai,or as your requirement Terms of Delivery FOB, CFR, CIF, CNF, EXWORK Terms of Payment L/C, T/T (30% desipot) Packing Standard export sea-worthy packing Delivery time Within 7-15 days after recieve 30% desipot or as your requirement Stock In stock Chemical Elements Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 201 0.12 0.75 7.00 0.045 0.045 1.00-1.28 13.70-15.70 202 0.15 1.00 2.25 0.045 0.045 4.07-4.17 14.00-16.00 301 0.15 1.00 2.00 0.045 0.03 6.00-8.00 16.00-18.00 302 0.15 1.00 2.00 0.045 0.03 8.00-10.00 17.00-19.00 304 0.035 0.75 2.00 0.045 0.03 8.00-13.00 18.00-20.00 309 0.15 0.75 2.00 0.045 0.03 12.00-15.00 22.00-24.00 309S 0.08 1.00 2.00 0.045 0.03 12.00-15.00 22.00-24.00 310 0.08 1.50 2.00 0.045 0.03 19.00-22.00 24.00-26.00 316 0.08 1.00 2.00 0.045 0.03 10.00-14.00 16.00-18.00 316L 0.035 0.75 2.00 0.045 0.03 10.00-15.00 16.00-18.00 321 0.04-0.10 0.75 2.00 0.045 0.03 9.00-13.00 17.00-20.00 409 0.089 1.00 1.00 0.045 0.05 ≤0.06 10.50-11.75 410 0.15 0.75 1.00 0.045 0.03 ≤0.06 11.5-13.5 420 0.16-0.25 1.00 1.00 0.040 0.03 ≤0.06 12.00-14.00 430 0.12 0.75 1.00 0.045 0.03 ≤0.06 16.00-18.00 430A 0.06 0.05 0.05 0.030 0.50 ≤0.25 14.00-17.00 Physical Proprety Grade YS (MPa) TS (MPa) Elongtion HRB Max 310 205 52 40 90