Product Name PVC Insulated Cable (Wire) Reference Standard PVC Insulated Cable (Wire) is manufactured according to the standards of IEC 60227-2007 and JB/T8734-2012 or BS, DIN, and ICEA up on repuest. Applications PVC Insulated Cable (Wire) is suitable for power intallation, fix wiring or flexible connection for electrical appliances with related voltage of 450/750V and below. Operating Characteristics Rated Voltage U0/U: 450/750V, 300/500V and 300/300V Max permissible Continuous Operating temperature of the conductor. 60227 IEC 07 (BV-90) ------ 90℃ 60227 IEC 08 (BV-90) ------ 90℃ 60227 IEC 56 (BV-90) ------ 90℃ 60227 IEC 57 (BV-90)------ 90℃ For other types ------------- 70℃ The ambient temperature under installation shall not be below 0℃. The bending radius of cable: D ≤ 25mm ------------- ≥ 4D D ＞ 25mm ------------- ≥ 6D ( Diameter of the cable )

Product Name AAAC、AAC&ACSR Reference Standard This product is produced with the standard of IEC 61089-1991 Applications Aerial transmission and distribution line, State Grid Project Performance Featured with convenient erection & maintenance, low cost of line construction, high transmission capacity, facilitate laying in special geographical condition such as across rivers and valleys, good conductivity and enough mechanical strength & tensile strength, pole distance could be increased and so on.

More than 45 years of professional manufacturing experience, WUXI TBS SCIENCE AND TECHNOLOGY CO., LTD have been one of the leading manufacturer in China,mainly specialize in ERW Tube&Pipe Mill Line, Slitting Line, Cut To Length Line, etc. Throughout many decades team efforts for improvement of superior product quality and pursuit of advanced technology, we have widely won high praise from domestic and overseas customer. We always keep strong faith in “Thinking for what customer think”. Our mission: “Customized Technical Support,Most Cost-Effective Commerical Solution,High Performace Machine Supply,Reliable Service After-Sales” TDG Series Directly Forming to Square and Rectangular Tube Mill Only one set of rollers can be continuously produced within a certain range of rectangular steel pipe, using the international advanced multi-radius combination molding process and high-frequency welding, forming by multi-channel symmetrical bending. It can be divided into small side bending, boardside bending, free bending at closed side, high frequency welding, precision straightening, produce the exact size and good quality pipe after cut off. Characteristic： One set mold roller can produces a range of rectangular tubes. This machine has characteristics such as no replace spindle, no remove roller stand and quick change rollers. Save mold, save time. Four square corner deformation part which can save extra deformation process then save energy consumption and equipment load. Specification of Directly Forming to Square and Rectangular Tube Mill SPECIFICATIONS: TDG250X250 TDG300X300 - Material to be processed Carbon Steel, strip coils of weld able grade with max. 0.2% carbon Carbon Steel, strip coils of weld able grade with max. 0.2% carbon - Type Square & Rectangular tube Square & Rectangular tube Square 100 x 100 – 250 x 250 mm 120 x 120 – 300 x 300 mm mm Rectangular 100 x 160 –150 x 250 mm 120 x 180 – 200 x 300 mm - Wall thickness 2.0 mm – 10.0 mm 3.5 mm – 12.7 mm - Tube length 6.0 m - 12.0 m 6.0 m - 12.0 m - Line Speed Max. 32m/min Max. 25 m/min - Welding Method Solid State High Frequency Welding Solid State High Frequency Welding - Forming Method Directly Forming to Square and Rectangular tube Directly Forming to Square and Rectangular tube Finished Products

More than 45 years of professional manufacturing experience, WUXI TBS SCIENCE AND TECHNOLOGY CO., LTD have been one of the leading manufacturer in China,mainly specialize in ERW Tube&Pipe Mill Line, Slitting Line, Cut To Length Line, etc. Throughout many decades team efforts for improvement of superior product quality and pursuit of advanced technology, we have widely won high praise from domestic and overseas customer. We always keep strong faith in “Thinking for what customer think”. Our mission: “Customized Technical Support,Most Cost-Effective Commerical Solution,High Performace Machine Supply,Reliable Service After-Sales”This CR ,Galvanized,Stainless Coil Cut To Length line series is applicable to coils of various specifications. It is used for the producing flattened plate through the procedure of uncoiling, flattening and cutting to required width and length. This line consists of loading cut, single pivot uncoiler, pre-leveler, hydraulic loop bridge, deviation corrector, fine leveler, servo length gauge, shear, belt conveyor, reversal discharger, stacker, discharging cart, servo transmission system, hydraulic system, etc. The machine performance has reached the international standard. This cut to length line series coil thickness range can be from 0.3mm to 3.0mm and coil width can be from 800mm to 2000mm,all these size steel coils are produced with large output, best quality and high precision.Our customized machines are also can be used for different processed material and meet nearly all applications. Specification of Cut To Length Line Model TCL3X2000 Material Type CR ,Galvanized,Stainless Coil Coil Thickness(mm) 0.3-3.0 Plate Width(mm) 800-2000 Cutting precision(mm) ±0.3 Line Speed(m/min) 10-80 Coil Weight(T) 20 Finish Plate Length(mm) 300-4000 Occupied Area(m) 28X9 Power(kw) 130

The solution for wastewater evaporation and crystallization, brine management, high salinity water treatment, desalination, industrial wastewater treatment etc. System components The Live steam as the thermal energy for heating the first effect evaporator then generates secondary vapor which drawn into the second effect evaporator and so on. The multiple evaporators attached to form the whole multiple effect evaporation system. The latent heat will be recycled and reused, thus reducing the energy consumption and enhance thermal efficiency. Technical parameter Energy Consumption

Falling Film Evaporator Multi-effect falling film evaporation concentration system Technical parameter Falling film evaporator basic working principle The feeding liquid will flow into the tubular falling film evaporator from the upper part of the heater, the feeding liquid flows down along the heater surface by the liquid distributor, By gravity and airflow effect, the feeding liquid flows from top to bottom, and be evaporated. After then the vapor-phase and liquid-phase flow into separator together, The separator will separate the vapor and liquid totally, consequently bring about the secondary vapor and concentrated liquid. For increasing the concentration of the discharging liquid, even avoiding fouling drywall condition, forced circulation falling film evaporator applied in such situation. That's saying to equip forced circulation pump to falling film evaporation system. Evaporator System components Evaporator, separator, condenser, vacuum and discharging system, delivery pump, PLC, electrical appliance and instruments, valves, pipelines etc. Multi-effect evaporation concentration equipment The Live steam as the thermal energy for heating the first effect evaporator then generates secondary vapor which drawn into the second effect evaporator and so on. The multiple evaporators attached to form the whole multiple effect evaporation system. The latent heat will be recycled and reused, thus reducing the energy consumption and enhance thermal efficiency. Features The classic popular evaporation and concentration equipment. As the effects increased, the more vapor energy shall be saved. Lower up-front investment, but a large amount of vapor energy consumption bring about a strong energy consumption intensity. It's suitable to use in low-cost vapor energy field. Friendly to the concentration of thermally sensitive material. Application Range Solution for concentration. Garlic juice concentration. Notice The evaporator is custom-built according to the feeding material and real situation. Contact us for the whole design, manufacture, installation and commissioning issues. Energy consumption Diagram Similar projects

Special Forklifts Model designation FD50 FD60 FD70 FD80 FD100 Engine ISUZU ISUZU ISUZU ISUZU ISUZU Rated capacity kg 5000 6000 7000 8000 10000 Load center mm 600 600 600 600 600 Lift height mm 3000 3000 3000 3000 3000 Overhead guard(cabin) height mm 2450 2450 2450 2585 2585 Height, mast lowered mm 2732 2732 2732 2700 2850 Height, mast extended mm 4380 4380 4380 4420 4330 Fork size mm 1220x150x50 1220x150x60 1220x150x65 1220x170x70 1220x175x80 Turning radius mm 3300 3300 3300 3700 3900 Overall length mm 3540 3540 3540 3940 4260 Overall width mm 1910 1910 1910 2165 2245 Service weight kg 7900 8160 8400 10950 12510

Diesel Forklifts Model designation FD20 FD25 FD30 FD35 FD40 Engine ISUZU ISUZU ISUZU ISUZU ISUZU Rated capacity kg 2000 2500 3000 3500 4000 Load center mm 500 500 500 500 500 Lift height mm 3000 3000 3000 3000 3000 Overhead guard(cabin) height mm 2150 2150 2160 2160 2230 Height, mast lowered mm 2060 2060 2060 2060 2190 Height, mast extended mm 4220 4220 4265 4265 4270 Fork size mm 1070x122x40 1070x122x40 1070x125x45 1070x125x50 1070x150x50 Turning radius mm 2220 2240 2400 2550 2800 Overall length mm 2510 2540 2700 2850 3035 Overall width mm 1160 1160 1226 1226 1400 Service weight kg 3530 3880 4350 4560 5300

Reach Trucks Model designation RT15 RT15-H RT20 Controller Curtis AC Curtis AC Curtis AC Rated capacity kg 1500 1500 2000 Lift height mm 3000 4500 3000 Reach distance mm 500 500 500 Height, mast lowered mm 2121 2080 1990 Height, mast extended mm 4040 5512 3870 Fork length mm 950/1150 950/1150 1070 Fork width mm 200-740 200-740 200-715 Aisle width, 1000x1200 pallets crossways mm 2790 2750 2892 Aisle width, 800x1200 pallets lengthways mm 2840 2800 2950 Turning radius mm 1670 1670 1670 Drive motor output (60 min. rating) kw 1.5 1.5 2.5 Lift motor output (15% rating) kw 3.0 3.0 3.0 Battery voltage (5h) V/Ah 24/270 24/400 24/280 Service weight kg 1840 2110 2430

Electric Pallet Trucks Model designation EPT20 EPT25 EPT30 Controller Curtis AC Curtis AC Curtis AC Rated capacity kg 2000 2500 3000 Fork length mm 1150/1220 1150/1220 1150/1220 Fork width mm 540/685 540/685 540/685 Fork height, lowered mm 85 85 85 Fork height, lifted mm 200 200 200 Turning radius mm 1746 1746 1746 Drive motor output (60 min. rating) kw 1.5 2.0 2.5 Lift motor output (15% rating) kw 0.8 1.5 1.5 Battery voltage (5h) V/Ah 24/210 24/240 24/210 Service weight kg 810 830 850

Electric Stacker Model designation ES16 ES16-H ES20 Controller Curtis AC Curtis AC Curtis AC Rated capacity kg 1600 1600 2000 Lift height mm 3000 4600 3000 Free lift mm 100 1594 100 Height, mast lowered mm 1981 2086 1981 Height, mast extended mm 3397 5102 3397 Fork length mm 1150/1220 1150/1220 1150/1220 Fork width mm 540/685 540/685 540/685 Aisle width, 1000x1200 pallets crossways mm 2452 2503 2452 Aisle width, 800x1200 pallets lengthways mm 2432 2480 2432 Turning radius mm 1570 1620 1570 Drive motor output (60 min. rating) kw 1.5 1.5 1.5 Lift motor output (15% rating) kw 2.5 3.0 2.5 Battery voltage (5h) V/Ah 24/210 24/240 24/210 Service weight kg 1065 1270 1090

Type: 6-10 CBM Radio Remote Controlled Grab Certification: ABS,BV,CCS, DNV,LR,NK,ISO Material Density: 0.2t/m3-7.0t/m3 Volume: 6cbm to 10cbm Ship Type:  38,000 to 42,000 dwt, 50,000 to 54,000 dwt Loading Material: carry coal, sand, grain, or iron ore cargoes, Application:  deck operations, shipboard, offshore, platforms We can design the right type grab for you according requirement. Remote Control Grab Technical Features Remote control grab is a dual scoop grab that applies radio control technique to single rope grab. Compare with traditional single rope grab, it’s more reliable, easy to operate, and typically operate in combination with single hook crane and ship deck crane.