This air filter cartridge is made specially for high temperature operating environments. We have two kinds of aramid available. One is the classical Nomex from America. The other one is also imported from abroad but cheaper. The technical data are as follows: Type: Aramid/340 Basic Material Aramid short fiber needle felt Long-term use temperature ≤200℃ Weight 340g/m2 Instantaneous using temperature ≤200℃ Thickness 1.0mm Precision 5um Air Permeability 200L/m2.s MERV MERV11/F6 Strength Warp 1100N/5cm Treatment Stiffening Weft 1000N/5cm Remarks Remarks: 1. Air permeability measured as P=200Pa. 2. Filtration Precision: Usually refers to the minimum grade of particle size that can be effectively blocked when the primary grime did not establish in the initial state. In actual use process, we can improve the filtration precision by lowering filter velocity and establishing stable primary grime etc. 3. MERV Grade: As the initial determination. ASHARE 52.2 in USA.EN779 in Europe. Application: High temperature operating environments.

Detailed informations(Products): 1. Light weight; 2. Low pressure drop; 3. Superior dust-holding capacity; 4. Long operating life; 5. Sturdy construction and easy installation; 6. Filtration Efficiency: DOP 99.997%,99.9997%@ 0.12um Standard: EN1822, Class U15/U16 Materials: External frame Aluminum sheet,Galvanized/Stainless sheet Sealant Polyurethane Face net Aluminum mesh/Coated mesh Filter Media Ultra fine glass fiber Gasket EVA,EPDM,Neoprene Maximum Operating temperature 70ºC Maximum Operating Humidity 100% Comprehensive advantages(Company): 1. The biggest manufacturer of filters in China; 2. H&V`s biggest customer in China; 3. Our vast experience and a state-of-the-art laboratory enable us to provide customization; 4. Welcome you to our factory and you will be convinced by our advanced workmanship and big scale. Application: ULPA(ultra-low penetration air/ultra low particulate air) filters can remove from the air at least 99.999% of dust,pollen,mold,bacteria and any airborne particles with a size of 120 nanometers(0.12μm) or larger. So they are used for terminal filtration in environments and industries requiring high level of cleaniness. Typical Industries: - Pharmaceutical - Electronics andsemiconductor manufacturing - Hospitals - Food Processing

Structure: This special suit is used widely for gas turbine air inlet system. Item Material(Standard) Material(Alternative) Filter Media Cellulose/Synthetic fiber/ All kinds of H&V air filtration`s filter Nanofiber/Polyester fiber media selection Top cap/ Galvanized steel Stainless steel,Color-coated steel/ Bottom cap recyclable plastic ABS (Open/Closed) Gasket EPDM Urethane/Silicone Inner Mesh Galvanized steel Stainless Steel, Color-coated steel/ Recyclable PP Outer Mesh Galvanized steel with Stainless Steel, Color-coated steel, hotmelt glue Recyclable plastic ABS Finishing Treatment Teflon-coating,waterproofing,oilproofing,flame-retarding treatment, antistatic coating,etc Feature: 1.Different configurations available: Conical/Conical, Cylindrical/Cylindrical, Conical/Cylindrical. 2.Different filter media options for specific operating condition, such as high humidity or high acid. 3.Liners can be galvanised steel mesh or wire wrapping. Application: Widely used in various gas turbine air inlet systems filtration. Also, we warmly welcome: -- Dust collector manufacturers to do customization; -- End users or agents to find replacements here; -- Famous brand to do OEM.

The rotary type magnetic separator is composed of a ring-shaped magnetic grid, a stainless steel case and a geared motor. The rotary type magnetic separator drives the ring-shaped magnetic grid to rotate by the gear motor, thereby effectively preventing the material from bridging when flowing through the rotatory magnetic separator. Blockage and the like occur to efficiently remove iron impurities in the loose agglomerated material. Rotary type magnetic separator is mainly used for sorting fine iron impurities in powder materials with relatively poor fluidity and easy to accumulate. These materials are more likely to be blocked or piled up by using traditional magnetic grid or drawer type magnetic separator. Widely used in food, food additives, pharmaceuticals, fine chemicals, lithium battery positive and negative materials, pigments, carbon black, flame retardants and other industrial production lines.

• The magnetic conveyors are used for conveying steel or ferromagnetic products at slope up or slope down or vertical  direction.Comparing the traditional conveyor system, The magnetic conveyor system need less space, less labor and cost. • The magnetic conveyor system will be designed according to the shape of transported object, the belt type, the belt  speed of conveyor system and the environmental conditions in which the conveyor will operate .

Download how to choose the right filter housing Download catalogue for doctop filter mussels open type multiple bag filter housing- BM series - BM series mussels open type multiple bag filter housing is developed on the basis of fast open type bag filter housing, suitable for processing all kinds of acid and alkali liquid, solvent and all kinds of neutral liquid. BM series mussels open type multiple bag filter housing the bolt is used to tighten the cover body, and the pressure is higher. With flange and sealing ring and the unique three point pressing device to fastening bag, avoid side leakage, the top cover adopts a spring balance auxiliary opening mechanism, and can be at any angle. Filter characteristics: • Using high grade design specifications to ensure adequate corrosion and maximum reliability; • Suitable for large flow filter, can accommodate more impurities, also suitable for a long time to replace the filter bag of occasion; • Can choose 01, 02 dimensions of the filter bag or filter; • Eye bolt design, convenient operation, economical and practical; • Elaborate design of the auxiliary opening mechanism, so that the opening process is easy and effort, one hand to complete the operation; • Selection of high quality type 0 elastomer sealing ring, excellent sealing performance and sealing life; • Reduce the downtime to the shortest, promote productivity and reduce operating costs; • The liquid part is made of pure stainless steel, excellent corrosion resistance and durability; • eight models, respectively, three bags, four bags, five bags, six bags, eight bags, twelve bags, seventeen bags, twenty-three bags.

Air intake filter for air compressors Highly machenized production lines; More than 15 years professional experiences; All kinds of. Application: All kinds of air compressors.

1. HEPA Panel filter; 2. Frame: Galvanised or aluminum; 3. Class: H13; 4. Media: Fiberglass or PP. Description: High efficiency panel filters are mainly used to filtrate the suspended particles in the air with the diameter of 0.3um and below and  used for the termimal filtration of all kinds of filtration system. Applications: HEPA filters are extensively used in the terminal filtration of the civil or industrial cleansing places in the industries such as electron, semiconductor, precision mechanism, pharmacy, hosipital and food, etc., which require relatively high cleanliness factors. It is suitable to filtrate for clean room and clean factory workshop with dust particle diameter less than 0.3-0.5um.

Structure: Item Material(Standard) Material(Alternative) Filter Media Cellulose/Synthetic fiber/ All kinds of H&V air filtration`s filter Nanofiber/Polyester fiber media selection Top cap/ Galvanized steel Stainless steel Bottom cap (Open/Closed) Gasket EPDM Silicone Inner Mesh Galvanized steel Stainless Steel Outer Mesh Galvanized steel Glued or ultrasonic welded straps Finishing Treatment Teflon-coating,waterproofing,oilproofing,flame-retarding treatment, antistatic coating,etc 1. Suitable for Gas Turbine air inlet housing in all kinds of operating environments: We will equip the most suitable filter media from various selection of high quality to clean your air perfectly; 2. Prime Technique: Careful construction, low pressure drop and competitive price. 3. Installation: The Twist Lock filter cartridge is Installed horizontally. For the above product, following is its specifications: Item Dimensions(OD*ID*L)mm Specification Twist lock air filter cartridge 324*213*864 1.Filter Media:HV6279(cellulose/polyester) 2.Filter Area:27m^2 3.Gasket OD:12.38inch 4.End caps and mesh: Galvanised steel Application: Thenow cylindrical filter cartridge is suitable for gas turbine air intake system in all kinds of operating environments.

Detailed information(Product): Item Material(Standard) Material(Alternative) Filter Media Cellulose/Polyester/Synthetic All kinds of H&V air filtration`s fiber/Nanofiber filter media at option Top cap Galvanized Steel Stainless Steel Closed bottom Galvanized Steel cap Gasket EPDM Silicone,Urethane Inner Mesh Galvanized Steel Stainless steel Outer Mesh Galvanized Steel Stainless Steel Finishing Treatments Teflon-coating,waterproofing,oilproofing,flame-retarding treatment, antistatic coating,etc 1. Wide application range: There are ample filter media selections of high quality  available,making it suitable for various industries and dust types, including abrasive, toxic and explosive dust. 2. Business model available: OEM for some famous brands; Replacement filters; Aftermarket filters. Comprehensive advantages(Company): 1. The biggest manufacturer of filters in China; 2. H&V`s biggest customer in China; 3. Our vast experience and a state-of-the-art laboratory enable us to provide customization; 4. Welcome you to our factory and you will be convinced by our advanced workmanship and big scale. Applications: Except for gas turbine air inlet systems, the square flange cartridges are also ideal for air filtration of dust and fume from cement, metal/aluminum, food & beverage, wood work, chemicals, powder coating, plasma/laser cutting, sand blasting, textiles,welding and casting. Please contact us if you have any questions about square end cap filter cartridge.

Download how to choose the right filter housing Download catalogue for doctop filter Full automatic self cleaning filter housing system Full automatic back washing filter housing BCM series BCM full automatic back washing filter housing is suitable for filtering high flow, high speed, low viscosity fluid particle impurity. BCM full automatic back washing filter housing is a mechanical and electrical products, with advantages of reasonable design, high filtration efficiency, low operating costs, continuous filtration in back washing process, etc., which is widely used in metallurgy, chemical, electric power, oilfield injection water, ballast water, environment-friendly water treatment, etc.. Working principle of BCM full automatic back washing filter housing: The filtered liquid is flowing from the inlet to the filter housing, then going through the fixing plate into the filter housing, the liquid flows from the filter element inside to the outside, and then flows out from the filter vessel outlet; Impurities produced from back washing filter flows out from the sewage outfall. How it works? When liquid flows through the filter element, the solid particles will be trapped in the inner side of the filter element. With the increase of pollutants, the differential pressure between the contaminated side and the clean side of the filter is gradually increasing. When the differential pressure reaches the set value, the differential pressure meter sends a message and the filter housing starts automatic back washing process. back washing process: 1.Gear motor drives washing arm to turn round by the jackshaft, the rotation angle of the washing arm is controlled by a photoelectric positioning switch, which will make it align to the cleaned filter. 2.The drain valve is opened, so that differential pressure will form between the filter element of the outside (clean side) and pollutant drainage. 3.Under the action of pressure difference, liquid flow of the clean side will flows from cleaned filter outside to inside to carry out back washing process, pollutants accumulated in the inner side of the filter screen will be washed away and flow out the filter through the sewage outfall. 4.The back washing time of each filter elment has been set, so when the back washing time is reached, the pollution discharge valve will be close, and this back washing process of filter element is over, then gear motor will drive washing arm to turn again, conducting back washing to the next set of filters, sewage valve will be open again., and so on to conduct back washing process to each mesh. 5.After all filter cleaning is completed, the washing arm returns to the original position under the control of the photoelectric switch, which means a back washing cycle is end. 6.Because the back washing is washing a set of filters in turn, therefore during the process the filter can maintain a continuous fluid filtration state. Set back washing process: 1.Differential pressure setting: the filter has differential pressure gauge, which is used to set filter differential pressure. 2.Time setting: the control box has time setting device, which can be used to set back washing process cycle according to user requirements. Differential pressure setting and time setting are automatic back washing configuration process, the two settings exist at the same time, while pressure setting is prior. 3.Manual start: In addition to differential pressure setting and time setting automatic back washing process, there is also TEST key to manually start the process, which is used for debugging and maintenance. Design features of BCM full automatic back washing filter housing: 1.The internal mechanical structure of filtration equipment using patented technology, realizes the back washing function in true sense, which can completely remove the filter impurities, clean every corner without dead angle, flux without attenuation, and guarantee the filtration efficiency and long service life. 2.Filter equipment selects 304, 316L, 2205, MONEL materials wedge filter element, with advantages of large intensity, high precision, corrosion resistance, and the maximum filtering accuracy is up to 25 microns. 3.Through its own retrieval and strain function, filtering equipment could realize automatic back washing, and can deal with unstable water quality fluctuation without manual intervention. 4.Filter equipment control system is sensitive, accurate operation, and can flexibly adjust the differential pressure and time setting value of back washing based on different water and filter accuracy. 5.During the back washing process, each filter vessel is conducted back washing in turn; which ensures the filter screen safety, efficient cleaning, while other filters are not affected and continue to be filtered. 6.Filtering equipment have less vulnerable parts, no consumable material, with low operating and maintenance costs and easy operation and management. 7.The filter equipment is designed compact and reasonable, with a small size, which is flexible and convenient for installation and movement. 8.Filtration equipment uses pneumatic drain valve, with a short time of back washing process, less water consumption, environmental protection and economic. 9.Filtering equipment working state is displayed by the touch screen, and the differential pressure and time setting is convenient for view. Application area: Sea water desalination, circulating cooling water and oilfield reinjection water, ballast water for ship, boiler reuse water, Ultrafiltration back osmosis filtration, ion exchange pretreatment, Paper nozzle filter.

Drawings: Application: All kinds of applications, such as welding fume, sand blasting, food and beverage and so on. We will choose proper filter media for your specific operating condition.