Download how to choose the right filter housing Download catalogue for doctop filter LPM filter cartridges are characterized by high-performance, hydrophilic mixed cellulose esters membrane, offering high flow rates, low protein adsorption and superior microbiological safety. These filters are designed to reduce costs and are especially suited for in prefiltration of vaccines. Features and Benefits ● Low protein binding ● Superior throughputs and cost-effective ● High retention efficiency for more critical degrees of prefiltration Quality ● Cartridges produced in a controlled environment ● Manufactured according to ISO9001 certified Quality Management System Ordering Information LPSL Low Extractable and Longer Service Life Filter Cartridge for Plasma Fractionation Application： • Plasma Fractionation • Sterile Injection Powder • Vaccines • Sterile Injection Powder • Small & Large Volume Parenterals • Plasma Fractionation • Ophthalmic Solutions • Facilities Water • Cell Culture Media Preparation • Active Pharmaceutical Ingredients • Beer Filtration • Wine Filtration • Bottled Water Filtration • Soft Drink Filtration • Dairy Filtration • High Fructose Syrup Filtration • Semicon Filtration • Ultrapure/DI Water Filtration • Photoresist Filtration • Display Filtration • CMP Slurry Filtration • Inkjet Inks Filtration • Water Filtration • Chemicals Filtration

Download how to choose the right filter housing Download catalogue for doctop filter LFC filter cartridges are manufactured from activated carbon fiber and polypropylene components, developed for decolorization, deodorization and unwanted adsorption, especially for oxidizing substances and organic impurities removal in bottled water industry. They can provide high flow rates at low pressure drops, non-toxic substance releasing and convenience for use. In addition, they are economical alternative to granular activated carbon cartridges. Features and Benefits ● High throughputs and high adsorption ability ● Broad chemical compatibility ● Easy to regenerate ● No hazardous substances releasing ● Resistant to acids and bases Quality ● Cartridges produced in a controlled environment ● Manufactured according to ISO9001 certified Quality Management System Specification LFC Filter Cartridge for Bottled Water Materials of Construction Filter Media Activated Carbon Fiber (ACF) Core, Cage PP End Caps PP O-rings/Gasket Silicone/EPDM/Viton Sealing technology Thermal Bonding, No Adhesives Dimensions Diameter Φ 68 (2.67 in) Length（in） 5, 10, 20, 30, 40 Filtration Area ≥ 5.4 ft2/10 in (≥ 0.50 m2/250 mm) Pore Size, μm 1.0, 3.0, 5.0 Maximum Forward Differential Pressure 4.2 bar@23℃（60.9 psi @73.4℉） 1.5 bar@85℃（21.7 psi @185℉） Sanitization May be hot water sanitized for 15 cycles using purified water at 85℃(185℉) for 30 minutes. Ordering Information LFC Filter Cartridge for Bottled Water

Structure: Frame Filter Media Seperator Flange Aluminum/Galvanised steel Meltblow PP/Glassfiber Stiff corrugated cardboard With header/no header Product Features: - Large airflow - Low pressure drop - Firm contruction Application Secondary filtration in central ventilation systems, particularly to protect and extend the life of HEPA/ULPA filters. They are suitable for use in ventilation and air conditioning systems of various airflows.

Detailed informations(Products): 1. High Efficiency; 2. Superior dust-holding capacity; 3. Installation:  Practical for both vertically and horizontally; 4. HEPA rated efficiency : H10-14. Materials: Item Material(Standard) Frame ABS plastic,aluminum sheet,galvanized steel sheet Filter Media Glass fiber,synthetic fiber Separator Hot melt Sealant Polyurethane Gasket EVA,EPDM,Neoprene Temperature Limit 100℃ Humidity Limit 100%RH Comprehensive advantages(Company): 1. The biggest manufacturer of filters in China; 2. H&V`s biggest customer in China; 3. Our vast experience and a state-of-the-art laboratory enable us to provide customization; 4. Welcome you to our factory and you will be convinced by our advanced workmanship and big scale. Application: V-bank HEPA filters widely used in high-volume airflow facilities, such as power plants. They are also used as pre-filters for final stage filters or ULPA filters.

Features: Panel pre-filters are  widely used for primary filtration. 1. Superior dust-loading capacity; 2. Low pressure drop for low cost; 3. Large air flow Structure: Item Material(Standard) Material(Alternative) Filter Media Synthetic fiber/Glassfiber/Cotton/Non-woven fabrics Frame Cardboard Aluminum/Galvanized Protect Mesh Aluminum net Stainless Steel net Filtration Efficiency G2,G3,G4 Average Arrestance 85%-96%@5micron Initial Resistance 30-50Pa Final Resistance 200-250Pa Temperature Limit 100℃ Color Blue or white Application: Pleated Pre-Fitlers widely applied in gas turbine air inlet housing, air conditioning and ventilating system as a prefilter before medium filters and HEPA filters.

The suspended Magnetic Separator is suitable for the continuous of ferromagnetic (Fe) particles --- such as iron or steel - from material streams containing a relatively large amount of Fe. The suspended magnetic separator is positioned over moving conveyor belts or in a chute for the purpose of removing ferrous contaminants from bulk product flows, protecting downstream equipment and improve products purity.

Download how to choose the right filter housing Download catalogue for doctop filter pp melt blown spun cartridge PP Melt blown cartridge is the standard one of melt blow filter cartridge series. It is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose our side and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life. Feature: 1.Three layers structure cartridge offers high dirt holding capacity,longer service life 2.Formed by thermal bond without using any binders and adhesives. 3.100% Pure Polypropylene will not cause any pollution to water 4.Wide Chemical compatibility 5.Groove design to extend the filtration surface area 6.All kinds of adapters are available. --Drinking water treatment --Electronic --Industrial water treatment --Plating --Chemicals,solvents Specifications: Outside Diameter: 63mm,115mm or up to customers' request IInside Diameter 28mm,30mm Length: 5'',10'',20'',30'',40'',50'',60'' Filter media and End Caps Polypropylene (PP) Core: Polypropylene (PP) Gaskets/O-ring : Silicone,EPDM,NBR,Viton Removal Rating: 1.3.5.10.25.50.75.100.150um Maximum Operating Temperature: 82Deg. Maximum Differential Pressure: 2.0Bar at 21 Deg.

Download how to choose the right filter housing Download catalogue for doctop filter LPSL filter cartridges are specially designed for sterilizing filtration of plasma fractionation. They are featuring extremely low extractables with no more than 10mg/10”, longer service life with 40 cycles of SIP. These filters can powerfully ensure final product quality. Features and Benefits ● Double layer hydrophilic PES Membrane ● Low protein binding ● Extensive drug compatibility for critical applications ● Extremely low extractables Quality ● Cartridges produced in a controlled environment ● Manufactured according to ISO9001 certified Quality Management System Ordering Information LPSL Low Extractable and Longer Service Life Filter Cartridge for Plasma Fractionation Application: ● Plasma Fractionation ● Sterile Injection Powder ● Vaccines ● Sterile Injection Powder ● Small & Large Volume Parenterals ● Plasma Fractionation ● Ophthalmic Solutions ● Facilities Water ● Cell Culture Media Preparation ● Active Pharmaceutical Ingredients ● Beer Filtration ● Wine Filtration ● Bottled Water Filtration ● Soft Drink Filtration ● Dairy Filtration ● High Fructose Syrup Filtration ● Semicon Filtration ● Ultrapure/DI Water Filtration ● Photoresist Filtration ● Display Filtration ● CMP Slurry Filtration ● Inkjet Inks Filtration ● Water Filtration ● Chemicals Filtration

Download how to choose the right filter housing Download catalogue for doctop filter LPPF filter cartridges are constructed of multilayer polypropylene, featuring high flow rates, broad chemical compatibility and high dirt holding capacity. These filters are ideal for removing particulate and colloidal contaminants in vaccines filtration. Features and Benefits ● Superior dirt-holding capacity ● Reliable retention of particulates ● Broad chemical compatibility Quality ● Cartridges produced in a controlled environment ● Manufactured according to ISO9001 certified Quality Management System Specification LPPF Multi-layer Filter Cartridge for Vaccines Materials of Construction Filter   Media Multi-layer   PP Support PP Core,   Cage and Drainage PP End   Caps PP O-rings/Gasket Silicone/EPDM/Viton/TEV Sealing   Technology Thermal   Bonding, No Adhesives Dimensions Diameter Φ68 Length 5 inch, 10 inch, 20 inch, 30 inch, 40 inch Filtration Area, ft2 2.1~3.2 per 10-inch   element Pore Size, μm 0.5, 1.0, 3.0, 5.0,   10, 20 Maximum Differential Pressure Forward:   4.2 bar @ 23 ℃; 1.5 bar @ 85 ℃ Particle Removal Efficiency (%) ≥ 90 Extractables, per 10-inch cartridge ≤ 50 mg after 24-h soak in   water Toxicity Component materials   meet GB/T 14233.2of Chinese National Standard for Safety Tests. TOC < 500 ppb after a water flush of 60 liters per 10-inch cartridge Sterilization Support steam-in-place sterilization or autoclave at 123℃ Oxidizable Substances Meets the criteria of Chinese Pharmacopoeia 2010, volume Ⅱ for purified water. Bacterial Endotoxins < 0.25 EU/ml as determined by the LAL test Ordering Information LPPF Multi-layer Filter Cartridge for Vaccines

Structure: Frame Filter Media Seperator Sealant Gasket Safe guard Cardboard/Plastic/Aluminum/Galvanised steel/Stainless steel Glass fiber paper/Synthetic fiber Continuous thermoplastic cord Polyurethane EVA Color coated steel grid/None Product Features: -Homogeneous filter media velocity coupled with low pressure drop -Large surface area and high dust holding capacity -Cost-efficient and dependable operation -Light weight and easy to install Application: -Industrial processes (chemicals, pharmaceuticals, food and beverages, optics, electronics, surface treatment technology, etc.) -Sophisticated air-conditioning technology(laboratories, museums, airports, office buildings, etc.)

Structure: Item Material(Standard) Material(Alternative) Filter Media Cellulose/Synthetic fiber/ All kinds of H&V air filtration`s filter Nanofiber/Polyester fiber media selection Top cap/ Galvanized steel Stainless steel,Color-coated steel/ Bottom cap recyclable plastic ABS (Open/Closed) Gasket EPDM Urethane/Silicone Inner Mesh Galvanized steel Stainless Steel, Color-coated steel/ Recyclable PP Outer Mesh Galvanized steel with Stainless Steel, Color-coated steel, hotmelt glue Recyclable plastic ABS Finishing Treatment Teflon-coating,waterproofing,oilproofing,flame-retarding treatment, antistatic coating,etc Application: Widely used in central air conditioning, gas turbine power plants, oxygen plants, steel mill blast oxygen station, furnace blast air station, power plant ,gas turbine air intake applications.

Download how to choose the right filter housing Download catalogue for doctop filter 10 Micron Stainless Steel Pleated Filter Cartridge This kind of metal filters is made of sintered metal fiber felt(with Protected Mesh).It Could be Added with Connectors,Gasket,O-ring,Inside/Outside Support Cage and etc.Its common length are 10",20", 30", 40".It has good capacicties such as the corrossion resistance,good air permeability,easy to back wash,high filter rating and etc. The Filter Elements Adaptors: 1.Standard Adaptors (222,220,226) 2.Fast Interface Connector 3.Threaded Connector 4.Flange 5.Tire Rod 6.Other Special Adaptors Sintered Metal Filter Elements Details: 1.Filter Components Materials:SUS 316L,304 2.Filtering Rating:1-50 micron 3.Filter Media:Sintered Metal Fiber Felt 4.Shapes:Cartridge Filter, Disc Filters,Pleated Filter Elements, Filter Panel and etc. 5.Working Temperature:-200 —600°C Filter Meidum Infos: 1.Layer:1 layer 2.Standard Thickness:1.0mm with protected mesh 3.MOC:316L 4.Medium Composition: 30/40/50 mesh + sintered metal fiber+30/40/50 mesh 5.Medium Type View: Pleated Type(Standard Type:5 layers) Pleated Type(Standard type:3 layers)