The rinser filler capper 3 in 1 machine is for fill light liquid. It can carry washing filling capping in one machine. It can be used alone or connected with other machines. It can connect with bottle unscrambler, or air conveyor, cap elevator ,labeling machine and so on. The rinsing, filling and capping process will be carried out using a continuous system in a fully enclosed safety interlocked chamber using our years of experience and the latest technology. Features (1)The all machine applies bottle handling technical and the filling valves go up-down when filling, which make sure the bottle filling goes stable, reliable during high speed. The bottle handling technical also make the different bottle changing easily without changing too many accessories. (2) This machine uses new generation stainless steel spring washing clips and the clips do not contact the upside of bottle screw avoiding the second pollution. It can both clear the inside and the outside of the bottle. (3) The advanced normal pressure filling principle was applied. Filling is quick, and stable. Not contacting with the liquid avoids second pollution and oxidation. (4) Magnetic torque is used for screw capping, and the power of screw capping can be adjusted steplessly. Capping is reliable and do no harm to the caps. (5) Advanced technologies, such as human-machine interface touch-screen and PLC program control are adopted in this machine. (6) All parts that have direct contact with the water are made of high quality stainless steel. The critical electrical components are from famous international companies, such as Mitsubishi, Omron to name a few.

Overview: This automatic weighing filling machine is specially made for all kinds viscosity materials, such as water paint, oil, water, paste and so on. The machine adopts electronic balance for filling materials. By adjusting the filling time by touch screen, it can fill all of the buckets in one filling machine, with quick speed and high precision. Characteristic： 1. To ensure the bottles and filling nozzles are in the correct position, we add a special bottles position device to make the whole filling process smooth and stable. No bucket no filling. 2. Adopt Mettler Toledo weigher and its weighing sensor of high accuracy, less than 0.3% error, and stable performance. 3. The filling nozzles are specialized made: anti-drop. Also, the filling nozzles will come into the bottle bottom, and moving up slowly when filling. 4. The filling nozzles and the hopper of the machine will uses quick-fit removal Structure: easy cleaning and disinfection. 5. Automatically peeling to realize net weight filling or gross weight filling, as well as the function of automatic correction and supplement.

Overview: This automatic oil filling machine is specially made for all high and low viscosity materials, such as olive oil, lubricant oil, tea, honey, juice , water etc. The machine adopts piston pump for filling materials. By adjusting the filling time by touch screen, it can fill all of the bottles in one filling machine, with quick speed and high precision. the filling nozzles will be anti-leaking. Features: 1) The machine is easy to disassemble, clean and maintain, and the parts which will contact with the filling materials are made of high quality stainless steel, will meet GMP standard. 2)The whole machine is safe, sanitary and eco-friendly, which adapts to various of working places. 3) No bottle no filling, the machine will alarm if the bottle is blocked, Touch screen technology can make the machine more handy and reliable, providing friendly man-machine interface. Photo-electricity sensor, approximate switch and other elements are of international famous brand. 4) The filling nozzle is equipped with piston pump ,This machine can realize diving filling according to the material properties, filling mouth with anti-drip device ensure that there is no drawing, no drip during filling, and filling with high precision.

Overview This metering pump filling machine is specially made for all viscous materials, such as water, gel, shampoo, oil etc. The machine adopts piston pump and for filling. By adjusting the position pump, it can fill all of the bottles in one filling machine, with quick speed and high precision. Feature 1. Adopts piston pump to fill, suitable for all kinds of liquid, high precision; The structure of pump adopts shortcut dismantling organ, convenient to wash, sterilize. 2. The piston ring of volumetric injection pump use different material of silicone, polyclonal or other kinds according to liquid characteristic, use ceramic pump in special industry. 3. PLC control system, frequency conversion adjusting speed, high degree automation. 4. No bottle, no filling, auto count the quantity. And have the anti-drop device. 5. Filling quantity of all pumps is adjusted in a lump, minim adjustable for each pump. Easy and quick operate. 6. Filling head is equipped with anti-dropping equipment, diving to the bottom to fill, rise slowly, to avoid bubble. 7. The whole honey bottle filling machine is suitable bottles in different size, easy adjusting, and can be finished in short time. 8. The whole machine meets GMP requirement. After sale service (1)  Long life service (2)  One year warranty (3)  Offering free parts for one year . (4)  Engnieers available to service machinery overseas

The rinser filler capper 3 in 1 machine is for fill light liquid. It can carry washing filling capping in one machine. It can be used alone or connected with other machines. It can connect with bottle unscrambler, or air conveyor, cap elevator ,labeling machine and so on. The rinsing, filling and capping process will be carried out using a continuous system in a fully enclosed safety interlocked chamber using our years of experience and the latest technology. Features (1)The all machine applies bottle handling technical and the filling valves go up-down when filling, which make sure the bottle filling goes stable, reliable during high speed. The bottle handling technical also make the different bottle changing easily without changing too many accessories. (2) This machine uses new generation stainless steel spring washing clips and the clips do not contact the upside of bottle screw avoiding the second pollution. It can both clear the inside and the outside of the bottle. (3) The advanced normal pressure filling principle was applied. Filling is quick, and stable. Not contacting with the liquid avoids second pollution and oxidation. (4) Magnetic torque is used for screw capping, and the power of screw capping can be adjusted steplessly. Capping is reliable and do no harm to the caps. (5) Advanced technologies, such as human-machine interface touch-screen and PLC program control are adopted in this machine. (6) All parts that have direct contact with the water are made of high quality stainless steel. The critical electrical components are from famous international companies, such as Mitsubishi, Omron to name a few.

This metering pump filling machine is specially made for all viscous materials, such as honey, oil, jam, tomato paste, motor oil, lubricant oil etc. The machine adopts piston pump for filling. all machines can be customized according your samples and your requirement. This hot equipment adopts bottle neck holding transmission technology to realize fully automatic rinsing,filling and capping. It is equipped with perfect temperature control system, reverse-flow system, automatic cleaning system and control program. Each machine element that contacts with the liquid is made of high quality stainless steel and food-grade rubber. 1. All components are famous brands, no bottle, no filling; no bottle, no capping; no drop, bubble or spill. 2. Good stainless steel material, according with GMP requirement. 3. PLC control, stepless transducer control. 4. Human-machine interface touch screen with easy operation. 5. Accurate filling, no drop, bubble or spill.  

Introduction： The e-liquid filling machineis available to fill small dose into various round and flat plastic or glass bottles with the range from 5--60ml. It consists of bottle supplying machine, linear filling and capping machine and vertical labeling machine. High precision cam provides a regular plate to position, cork and cap; and touch screen controls all action. No bottle no filling and no capping. The machine enjoys simple operation and also protects bottle caps. Mainly used for the filling linkage production of various liquid materials in pharmaceutical, food, chemical industry. Features: 1.All machines adopt PLC control and touch screen operation. 2.The filling machines have 3 functions of liquid/oil filling station, plug arranging station , plugging station, cap arranging station and capping station. 3. All machines made of SS304, the contact parts made of SS316L, meet GMP standard. 4. Filling capacity can be adjusted on touch screen, and the parameters can be saved in machine automatically. 5. No bottle no filling, no plug no capping, production capacity automatically account.

Overview This Machine adopt auger to measure and fill powder and granular, with high filling speed and filling accuracy. The auger is driven by servo motor. It fits more to the fluidic or low-fluidity materials, like coffee powder, albumen powder, pharmaceuticals, condiment, solid drink, white sugar, dextrose, coffee, agriculture pesticide, granular additive, and so on. The automatic small powder filling sealing machine ’s spiral driven by servo motor drive which is not easy to wear, it can fix position precisely, set the speed and work stably. It can add dust collect device in the outlet of material for filling without dust of the automatic small powder filling sealing machine An optional diving nozzle mechanism plunges the filling nozzles into the container for increased production speeds without splashing, and we can produce the different filing nozzles for your different speed requirement. Filling volumes are programmable and can be adjusted from the touch screen. Features It is applicable to different-shaped bottles and plastic bottles: plastic,glass bottle and mould bottle.The bottle-in and bottle-out has specialized structure .It doesn't drop bottles or nip bottles The surface of whole machine is made by stainless steel 304. Knockdown transparent hopper is easy cleaned. The hopper is specially made with a cover and a mix in it to prevent dust and make the powder even. The metering system is adjustable auger, which is driven by servo motor, with quick speed and high filling accuracy. PLC+ Human-computer touch screen control system: easy adjustment and easy operation. It also can save the parameters for later use. Online electronic scale can weight the powder gram automatically, ensure the filling accuracy. Bottle position correct device.To ensure the bottles and filling nozzles are in the correct position, we add a special bottles position device to make the whole filling process smooth and stable. No bottle no filling.

Overview This piston pump filling machine is specially made for all viscous materials, such as peanut butter, honey, tomato paste, jam etc. The machine adopts piston pump and for filling. By adjusting the servo motor, it can fill all of the bottles in one filling machine, with quick speed and high precision. The machine adopts full-auto PLC and human-computer touch screen control system. For different volumes adjustment are no problem. All the touch production material is stainless steel 304. Characteristics 1 use good quality components and parts. 2 all design with rich experience 15 years. 3 humanization design concept to machine 4 Whole machine meet GMP standard. 5 All spare parts are meet client requires

Description: The machine is specially designed for small bottles such as e-liquid, eyedrop, syrup, essential oil, nail polish etc and widely used in the food, cosmetic, pharmaceutical, oil and other industries, It works automatically with high speed, adopts peristaltic pump to filling from 2-50ml with high precision, controlled by PLC, easy to operate and no bottle no filling and capping. Salient Features: The whole machine is safe, sanitary and eco-friendly, which adapts to various of working places. The filling nozzle is equipped with. peristaltic pump and run stable with high precision. The structure of peristaltic pump is easy to install and change for different flavor. Machine made of SS304, meet GMP standard and easy to take apart for cleaning. No bottle no filling, no plug no capping, production capacity automatically account. All controlled by the PLC and touch screen, easy to operate

Overview This piston pump filling machine is specially made for all viscous materials, such as peanut butter, honey, tomato paste, jam etc. The machine adopts piston pump and for filling. By adjusting the servo motor, it can fill all of the bottles in one filling machine, with quick speed and high precision. The machine adopts full-auto PLC and human-computer touch screen control system. For different volumes adjustment are no problem. All the touch production material is stainless steel 304. Characteristics 1 use good quality components and parts. 2 all design with rich experience 15 years. 3 humanization design concept to machine 4 Whole machine meet GMP standard. 5 All spare parts are meet client requires

Application: The machine is suitable for the dual bag packing for small grain-like materials, such as tea leafs, medicinal tea and healthy teas 。 The machine is a latest type of heated sealing packing machine, which has multifunction, can automatically pack. The main feature of the machine is one-time packing for the inner and outer bag, avoiding hands directly contacting with stuff materials, improving the efficiency. The inner bag is made of filter cotton paper, which can be automatically packed with thread and label. The outer bag is composite paper. The advantages are photoelectric location for the tag and outer bag, adjustment to the need of the content, length of inner bag and outer bag, and tag. The dimension of inner and outer bag can be adjusted according to the need so that to achieve the perfect shape, to upgrade the appearance for the product, then add the value of it. Model Packaging speed (bag/min) Filling range (g) Bag size (mm) Tag size (mm) Thread length Power (V/kw) Dimension (mm) Weight SD-DPC-30 DL 35-60 3-15 Inner  bag Width:40-80 length:50-70 Outter bag Width: 60-90 Lenth:70-120 Width 40-55 Length 20-24   155   220 3.7kw   1200*900*1900 500kg