This filling machine is suitable for: 1.      Automatic conveyor belt running Automatic long dropper feeding and loading 5.      Automatic double filling heads and filling 6.      7.      No bottles no dropper 8.      9.      Can be customized according to different bottles shape and size *High precision cam provides a regular plate to position, cork and cap; accelerating cam makes capping heads going up and down; constant turning arm screws caps; peristaltic pump measures filling volume; and touch screen controls all action. *The machine enjoys high position accuracy, stable driving, precise dosage, and simple operation. we will take video for: 1.      how to connect the power 2.      how to operate the machine 3.      how to maintain the machine and how often to do it 4.      how to adjust machine to different bottle or material. you can also check for:

Semiautomatic bottle blow molding machine Semiautomatic bottle blow molding machine can produce PET containers including the bottles for kinds of drink , soybean, vinegar, and pesticide (less than 10liters) according to the different bottle shape and diameter. 1. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. 2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. 3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. 4. The machine can be operated in the step-by-step mode and the semi-auto mode. 5. The machine is small with low investment, easy and safe to operate. Automatic blow molding machine Automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle, cosmetics bottle etc. 1. Stable performance with advanced PLC. 2. Conveying preforms automatically with conveyor. 3. Strong penetrability and swift distribution of the heater by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared pre-heater. 4. Strong clamping force with high pressure and double crank links to lock the mold. 5. Low cost, high efficiency, easy operation, easy maintenance, with automatic technological process. 6. Ideal effect of the chilling with the chilling system. 7. Easy installation and starting 8. Low rejection rate: less than 0.2 percent.

Characteristics:  1. Control system： use Europe and United States series American AB brand PLC control system, with high stable operation and extremely low failure rate. 2.Operation system： The man-machine control 10 inch touch screen, directly visual interface easy operation ,with Chinese and English two kinds language, also rich with the help of the function       and fault display function. 3. Alarm function : such as label spill, label broken or other malfunction during machine working all will alarm and stop working. 4. Check system： Use German LEUZE check label sensor, automatic check label station, stable and convenient don’t have much higher requirement for the worker. 5. Send label system：use American AB high-power servo control system, stable with high speed. 6. PARAMETER SAVE：can save 30 groups labeling parameters, when change the bottles, don’t need reset parameters, just adjust the machine part is ok. 7. Machine Material：The machine and spare parts all use material S304 stainless steel and anodized senior aluminum alloy,with high corrosion resistance and never rust. 8. Labeling way : use the servo send label system to send label on product surface. 9. Low voltage circuit all use the German Schneider brand.

Introduction： The e-liquid filling machineis available to fill small dose into various round and flat plastic or glass bottles with the range from 5--60ml. It consists of bottle supplying machine, linear filling and capping machine and vertical labeling machine. High precision cam provides a regular plate to position, cork and cap; and touch screen controls all action. No bottle no filling and no capping. The machine enjoys simple operation and also protects bottle caps. Mainly used for the filling linkage production of various liquid materials in pharmaceutical, food, chemical industry. Features: 1.All machines adopt PLC control and touch screen operation. 2.The filling machines have 3 functions of liquid/oil filling station, plug arranging station , plugging station, cap arranging station and capping station. 3. All machines made of SS304, the contact parts made of SS316L, meet GMP standard. 4. Filling capacity can be adjusted on touch screen, and the parameters can be saved in machine automatically. 5. No bottle no filling, no plug no capping, production capacity automatically account.

Overview This metering pump filling machine is specially made for all viscous materials, such as water, gel, shampoo, oil etc. The machine adopts piston pump and for filling. By adjusting the position pump, it can fill all of the bottles in one filling machine, with quick speed and high precision. Feature 1. Adopts piston pump to fill, suitable for all kinds of liquid, high precision; The structure of pump adopts shortcut dismantling organ, convenient to wash, sterilize. 2. The piston ring of volumetric injection pump use different material of silicone, polyclonal or other kinds according to liquid characteristic, use ceramic pump in special industry. 3. PLC control system, frequency conversion adjusting speed, high degree automation. 4. No bottle, no filling, auto count the quantity. And have the anti-drop device. 5. Filling quantity of all pumps is adjusted in a lump, minim adjustable for each pump. Easy and quick operate. 6. Filling head is equipped with anti-dropping equipment, diving to the bottom to fill, rise slowly, to avoid bubble. 7. The whole honey bottle filling machine is suitable bottles in different size, easy adjusting, and can be finished in short time. 8. The whole machine meets GMP requirement. After sale service (1)  Long life service (2)  One year warranty (3)  Offering free parts for one year . (4)  Engnieers available to service machinery overseas

Overview This machine is applicable for packing liquid in form of stand-up pouch, with/without spout, with different patterns of sealing, which include processes of packaging film-pulling, liquid dosing, filling, pouch-making, sealing and cutting off. Features Products dosing, Filling, Laminate heat sealable stand up pouch making and sealing. Even with spout. Stainless steel 304 structure and surface PLC & HMI Control Integrated, easy for operation and troubshooting Simple changing of pouch former, to adapt different pouch size requirement Intelligent temperature controlling configuration, ensure the artistic and neat sealing Configure with packaging film pre-pulling device, to enable stable pouch making No film no filling, and easy to change the packaging film

Description: This type of machine is suitable for changing different kind volume of the bottle in one machine line and is widely used in the food, cosmetic, and other industries. It is rather simple and rapid to change spare parts, the design is quite distinct, the property is very advantageous and it is customized and can connect with different kinds machine to form a complete set of produce line. Salient Features: (1) The machine controlled by PLC and touch screen control panel, drive by servo motor, we set several procedures, mode 1, mode 2, mode 3 and so on for different volumes adjustment, easy to operate. (2) Automatic counting the bottles and no bottle no filling. (3) 4.Machine body and the spare parts contacting liquid are made of stainless steel, full compliance with GMP standard. (4) No bottle no filling, the machine will alarm if the bottle is blocked, it also equipped with drip-proof device (5) The machine is easy to disassemble, clean and maintain, and the parts which will contact with the filling materials are made of high quality stainless steel, will meet GMP standard.

The cooling tunnel will design by your requirements and size of your factory. The tunnel length is 5.5 M width is 0.4M (two lines up to 11M long,1M wide)with one set air cooling chillers The chiller adapt screw compressor. The air in chiller is sealed, internal recycle.so the temp will keep low enough. Temp Air outlet is -3^c(three degress below zero), Re-absorb air is about 10^c.at the end of tunnel there will be a buffer area which will customized.we can make assure it can satisfy your cooling requires.

Overview  The machine is suitable for round bottle and flat bottle. Can fill syrup, lipometric etc. SUS304 stainless steel piston pump volumetric filling, with high filling precision, stable working and easy operation etc; meet GMP requirement. The machine take bottles to the turn table by conveyor, the board on the table take bottles into each station, then fill, insert valve, screw cap and there is approaching switch in each station, checking position signal and carry on different operation. The line through electricity, pneumatic and mechanism to realize the above work. Main parts:(1)rack (2)filling nozzle (3)measuring pump group (4)conveyor (5) motor(6)filling nozzle elevator (7)turntable (8)Nylon pipe (9) photoelectrical detector (10) valve(11) one-way valve (12) slicer (13) vibration plate (14) vibrator (15) rail (16) lamp stand etc. Main technical parameter: Capacity: 25-30b/min  Filling way: peristaltic pump  dosing filling Nozzle: 1 heads  Filling precision: ±0.5%  Way to put valve: automatic  Cap percent of pass: ≥99% Stand-lone noise: ≤50dB  Power: 1.7kw Weight: 650kg Round bottle labeling machine Overview:  Model SD-LTB-A Vertical Labeler for round bottle is mainly used in food, chemical and medicine industry. It can realize the automatic bottle-conveying, label separating, labeling round the bottle and a series of steps. Step-less speed adjustment, easy operation and adjustment with high speed and efficiency. The label will be attached to the exact position with high accuracy and low noise. The spare parts can be matched by customer’s specific requirement Model SD-LTB-A Vertical labeler for round bottles Capacity 80～100 BPM Bottle Size（mm） To be confirmed Machine dimension（mm） 1600×960×1260 Weight（kg） 200 Power（w） 300 Voltage 220V / 50～60Hz (customized)

Linear washing and drying machine(Include Air compressor) Introduction  This machine is suitable for cleaning and drying of the oral liquid bottle or the penicillin bottle. The bottle can be used directly to fill the bottle.The bottle mouth downward after entering into the bottle of bucket, automatically forward by screw into the bottle, the bottle back into the water and purified water flushing, purifying compressed air blowing tube inside and outside, inside and outside again into the hot air circulation drying tunnel, on the bottle before filling heating drying;In the end, the bottle turns 180 degrees and then goes up into the flask.This way the bottle can be filled directly. Filling and capping machine The machine is the host of freeze-dried products or the liquid filling line of the shilin bottle, which has the functions of automatic feeding, automatic filling, automatic feeding, automatic vacuum suction and pressure stopper. The whole machine adopts advanced technology such as variable frequency speed regulation, programmable controller and touch interface. The liquid filling is completed by the sanitary plunger pump, and the measurement is accurate. It is absolutely reliable to plug in equal-disc positioning. With no bottle, no plug alarm and automatic stop protection function to ensure normal operation. High machine automation, stable operation, convenient operation and compliance with GMP requirements. Main technical parameter:  Volume: 5ml~50ml  Filling precision: ±1.0% Capacity: 20～40/min  Main motor power: 0.75KW 380V (customized)  Pressure: 0.5～0.7Mpa  Air consumption pressure: 0.7～0.8Mpa  Air consumption: 0.1～0.3m3/min  Voltage: 220V 380V (customized)

This machine is mainly composed of a bottle clamping belt, conveyor belt, composed of two water two air cleaning unit, single filling machine can form liquid automatic production line, can also be used alone to wash bottles. The glass bottle with bottle clamping to the conveyor belt, by holding the bottle with the bottle clamping turning into cleaning system washing process, sanitary pump pressurized water, and the needle tube is inserted into the bottle cavity flushing clean air, complete cleaning process moisture. This machine has specifications for convenient replacement, washing bottle of good quality. Suitable for glass bottle blowing cleaning and high strength plastic bottles, according to user needs, transform small specifications can be used for different diameter, the height of the bottle. Suitable for food, medicine, cosmetics and chemical products for blowing.

This machine is mainly composed of a bottle clamping belt, conveyor belt, composed of two water two air cleaning unit, single filling machine can form liquid automatic production line, can also be used alone to wash bottles. The glass bottle with bottle clamping to the conveyor belt, by holding the bottle with the bottle clamping turning into cleaning system washing process, sanitary pump pressurized water, and the needle tube is inserted into the bottle cavity flushing clean air, complete cleaning process moisture. This machine has specifications for convenient replacement, washing bottle of good quality. Suitable for glass bottle blowing cleaning and high strength plastic bottles, according to user needs, transform small specifications can be used for different diameter, the height of the bottle. Suitable for food, medicine, cosmetics and chemical products for blowing.