shanghai XK building Material Co.,Ltd has wide range of Plain strut channel

Shanghai XK Construction Material Co.,Ltd

Home > Products > Unistrut Channel > Plain strut channel

Plain strut channel

Pre-Galvanized/PG/GI

Type	W（mm)	H(mm)	Thickness(mm)	L(mm)
XK4121PS	41	21	2.0	3000
XK4141PS	41	41	2.0	3000
XK4162PS	41	62	2.5	3000
XK4172PS	41	72	2.5	3000
XK4182PS	41	82	2.5	3000
Note:Other Thickness and Length available

Material & Finish
Pre-Galvanized / PG / GI – for indoor use to AS1397
Hot Dip Galvanized / HDG – for outdoor use to BS EN ISO 1461
Powder-coated/PC-Protect items from oxidizing and damaging
Stainless Steel SS201/SS304 / SS316
Mill / Mild /Plain Steel to ISO 4995

A zinc coating can be economically applied to steel sheet immediately after its manufacture;the result, pre-galvanized steel(to BS EN 10346) can be an attractive, bright material which is suitable for non-arduous environments.

Prep-galvanized(or mill galvanized) steel is produced by unwinding steel coil and passing it continuously through a bath of molten zinc and then past air jets to remove excess zinc from the surface.The process is closely controlled to produce a thin, even and ripple free zinc coating with very few imperfections.

Because this pre-galvanized steel coil must then be cut to shape during subsequent manufacture of support equipment, the edges of the finished components will have no zinc coating. This aspect, together with the relatively light zinc coating provided by the process, make pre-galvanized service supports suitable for indoor, low-corrosive environments(particularly where an aesthetically attractive appearance is important) but unsuitable for humid indoor or outdoor applications.

XK strut channel use all the good quality pre-galvanized steel coil as Q195 , all the coil and plate we will check the galvanized thickness to meet clients different order.

HDG-Hot dip galvanized

Type	W（mm)	H(mm)	Thickness(mm)	L(mm)
XK4121PS	41	21	2.0	3000
XK4141PS	41	41	2.0	3000
XK4162PS	41	62	2.5	3000
XK4172PS	41	72	2.5	3000
XK4182PS	41	82	2.5	3000
Note:Other Thickness and Length available

Material & Finish

Hot Dip Galvanized / HDG – for outdoor use to BS EN ISO 1461
Powder-coated/PC-Protect items from oxidizing and damaging
Stainless Steel SS201/SS304 / SS316
Mill / Mild /Plain Steel to ISO 4995

Hot-dip galvanization is a form of galvanization. It is the process of coating iron and steel with zinc, which alloys with the surface of the base metal when immersing the metal in a bath of molten zinc at a temperature of around 840 °F (449 °C). When exposed to the atmosphere, the pure zinc (Zn) reacts with oxygen (O2) to form zinc oxide (ZnO), which further reacts with carbon dioxide (CO2) to form zinc carbonate (ZnCO3), a usually dull grey, fairly strong material that protects the steel underneath from further corrosion in many circumstances.

PC-Powder Coated

Type	W（mm)	H(mm)	Thickness(mm)	L(mm)
XK4121PS	41	21	2.0	3000
XK4141PS	41	41	2.0	3000
XK4162PS	41	62	2.5	3000
XK4172PS	41	72	2.5	3000
XK4182PS	41	82	2.5	3000
Note:Other Thickness and Length available

powder-coated/PC-Protect items from oxidizing and damaging
Stainless Steel SS201/SS304 / SS316
Mill / Mild /Plain Steel to ISO 4995

Powder Coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as household appliances, aluminum extrusions, drum hardware, and automobile and bicycle parts.

XK Strut Channel can meet all the clients order for the color order , durability , etc. XK use the powder paint as PPG, International .

SS-Stainless steel 201 304 316

Type	W（mm)	H(mm)	Thickness(mm)	L(mm)
XK4121PS	41	21	2.0	3000
XK4141PS	41	41	2.0	3000
XK4162PS	41	62	2.5	3000
XK4172PS	41	72	2.5	3000
XK4182PS	41	82	2.5	3000
Note:Other Thickness and Length available

Material & Finish

Stainless Steel SS201/SS304 / SS316
Mill / Mild /Plain Steel to ISO 4995

Stainless steel is used for buildings for both practical and aesthetic reasons. Stainless steel was in vogue during the art deco period. The most famous example of this is the upper portion of the Chrysler Building (pictured). Some diners and fast-food restaurants use large ornamental panels and stainless fixtures and furniture. Because of the durability of the material, many of these buildings still retain their original appearance. Stainless steel is used today in building construction because of its durability and because it is a weldable building metal that can be made into aesthetically pleasing shapes. An example of a building in which these properties are exploited is the Art Gallery of Alberta in Edmonton, which is wrapped in stainless steel.

Features

XK Product Performance

A.Construction is simple, save time and labor;

B.Light weight, cheap cost;

C.Length can be customized according to customer needs;

D.High mechanical strength;

E.A variety of accessories can be connected into different combinations;

F.Looks beautiful.

1.XK Strut Channel Series are made of hot-rolled low-carbon steel, galvanized surface treatment, the wall thickness of the bracket is 2 mm, the standard length is 3 meters.

2.All XK Strut Channel can be customized according to requirements ,ordering hot galvanized sheet and stainless steel must be stated before.

Products