Feature:
The filling temperature of carbonated drink is 0-4 celcius degree, and the environment temperature is 20-30 degree, so the filled bottles will be full of water drops if they are not warmed, so the bottle warming machine warms the bottles by spraying warm water from the nozzles to the outside walls of bottles to keep the bottles warm and away from water drops, and make it convenient for labeling and printing. The chain plate apply anti-friction and high temperature resistance engineering plastic. Apply advanced PLC controller to assure all action precision. The conveyor is frequency controlled. All spray tubes are made of stainless steel and spray evenly. All spray nozzles are made of engineering plastic. The catchment flume is made of stainless steel and equipped with a level alarm device. The spray-cooling tunnel has a spray cooling recycling water pump.

• The tunnel have strong legs.
• The tunnel is sealed. Only both of sides door can be opened. The whole machine is SUS304 material, there is no plating on surface
• There is a water tank, and the water tank will be connected with water pump. So pump will offer water and clean.
• Yeah, the Water tank will offer water.
• The side covers are easily to remove, so you can check, inspect and clean the tunnel anytime.
• We will offer the conveyor for tunnel, and the conveyor has motor .
• The transformer of frequency will control the conveyor.
• Yeah, steam heating is better than the electric heating. It is faster.
• The heat exchanger system
• The system, and thermal water heating is carried out by means of electronic controls, steam valves and steam registers.
• There are the filters for water circulation pumps. And we will install the separate filter for the water pipes.
• The machine is automatic machine. We will install the solenoid valve for the machine. So it will adjust temperature, speed automatically.
• We will install the light alarm system. If the machine have emergency situation, the light will twinkling.
• Electrical control cabinet with signaling elements, button control, an electronic temperature registrar, has a degree of protection IP-54.
• The pasteurizer is made of stainless steel AISI 304.
• In the input and the output of the pasteurizer, emergency stop buttons are provided.
• The normal position of all taps is closed.

Technical parameter
Production capacity	8000-12000BPH
Bottle type	100ml- 2500 ml
Process parameters	Circulating water	56m3/h
	Bottles into temperature	0℃～40℃
	Bottle out temperature	20℃～30℃
	Cooling effective area	10.0×1.3m2
	Operating speed of the conveyor belt	100-500(mm/min)
	Cooling time is adjustable, the main motor inverter
Water consumption	6.8M3/h
Cooling time	12-15min
Steam pressure	Steam pressure
Steam consumption	80kg/h
Machine power	4 KW
Dimension	8000×2000×1700 mm (length* width* height)
Weight	About 5500KG

	Treatment time	Water temperature	Inlet product temperature	Outlet product temperature
1st heating	5.5min	29°	6°	22.5°
2nd heating	6min	43°	22.5°	38°
Pre-pasteuization	8.5min	66°	38°	62°
Pasteurization	10min	62°	62°	62°
1st cooling	6.5min	42°	62°	46.5°
2nd cooling	7.5min	28°	46.5°	31.5°

No.	Name	Brand
1	Press-button	Schneider
2	Magnetic Contactor	Schneider
3	Relay	Omron
4	Frequency transformer	Siemens
5	Motor	JSCC made in Germany
6	Air cylinder	Airtac
7	Solenoid valve	Airtac
8	A level sensor	Panasonic
9	Temperature sensor	Panasonic
10	Bearing	NSK
11	PLC	Siemens
12	Touch screen	Siemens
13	Electrical Control	Siemens
14	Pumps to protection	Nafang
15	Main belt of pasteurize is plastic	Teflon
16	Step motor	SNAYO made in Japan
17	Sprinkle nozzle	MIC
18	Steam Valve	MIC