Imitation marble decorative sheet extrusion line adopts a special curing technology, to provide a mirror effect on the product surface, with a strong artistic appeal, can create a magical change, bright colors, the magnificent visual effects. Product saturation film surface, similar to ceramic stone transparent glass layer, it can achieve such as stone-like three-dimensional affect, with high hardness, impact resistance, acid-resistance, weathering-resistance, low coefficient of expansion, non-absorbent, good flatness and other advantages, and the exclusion of natural stone harmful substances and radiation elements, is an ideal new generation of green building materials. Specification: Extruder type 1220*2440MM Product thickness 1-4.5MM Max. extrusion capacity 350-450kg/h Main motor power 55KW

PVC vinyl siding exterior / outside wall panel extrusion line  is applied in house, office building, villa, and wall protection. Due to it's top layer covered with PVC, ASA, or PMMA, it can be used in hot, cold dry or wet place, can bear long time sun light, wind, rain and bad weather. This line consists of extruder, co-extruder, embosser, constant temperature oil tank, vacuum calibrator tank, punching machine, haul off, cutter and stacker. We can supply ordinary speed (6-8m/min) and high speed (10-20m/min) production line. Model SJZ65/132-SJZ45/100+YF400 SJP75/28-SJZ45/100+YF400 SJP90/32-SJZ45/110+YF400 Max profile width 400 400 400 Haul off width 100 100 100 Haul off force 2 2 2 Haul off speed 1-8 1-10 1-15 Total power( without extryder) 75 75 110

The production line includes screw feeder, plastic extruder, mould, vacuum forming table, haul off unit, cutting machine, stacker. Auxiliary equipments: mixer, crusher, pulverizer, lamination machine, hot stamping machine, printer and so on. Features: High filing material, even plasticizing, lower percentage of additive material are needed, stable production, and easy operation. Specifications Model SJZ48 SJZ55 Motor power 18.5 22 Screw diameter 48/112/115/118 55/110/120/125 Screw rotation speed 34.7 34.7 Output capacity(PVC) 80-100 100-150

The production line includes screw feeder, plastic extruder, mould, vacuum forming table, haul off unit, cutting machine, stacker. Auxiliary equipments: mixer, crusher, pulverizer, lamination machine, hot stamping machine, printer and so on. Features: High filing material, even plasticizing, lower percentage of additive material are needed, stable production, and easy operation. Specifications Model SJZ48 SJZ55 Motor power 18.5 22 Screw diameter 48/112/115/118 55/110/120/125 Screw rotation speed 34.7 34.7 Output capacity(PVC) 80-100 100-150

YF series PVC profile production line is mainly for producing PVC window profile, according to different profile section and mould to choose different conical or parallel twin-screw extruder and provide relative vacccum sizing tank, haul-off, cutter, stacker and auxiliary equipment. Capacity of main frame can be optionally chosen from 60-700 kgs/hour. The haul-off unit has applied unique lift technique of our co. Its work is stable, its to meet demand of high speed extruding. Movement speed and drawing speed of cutting machine keep synchronous. All movements are controlled by imported PLC, the design is reasonable, the operation is stable, it can conduct automatic cutting with fixed length. Powder & dust suction device can be provided. With different molds, the tilter platform can choose such specifications as 4-meter, 6-meter, 8-meter, 11-meter, etc. With twin parallel screws extruder, it is particularly suitable for high speed extruding of profiled material.reliability is good, its pulling force is large. Vacuum setting has applied special enlarged vortex cooling system which is good for cooling and calibrating so as Model SJZ45/90 SJZ50/105 SJZ55/110 SJZ65/132 SJZ80/156 Motor power 15 18.5 22 30-37 55 Screw diameter 45/90 50/105 55/110 65/132 80/156 Screw rotation speed 34.7 34.7 34.7 34.7 34.7 Output capacity(PVC) 60-80 80-100 120 150-250 250-400 Model YF108 YF180 YF240 YF300 YF400 Max. profile width 108 180 240 300 400 Haul off width 100 100 150 150 150 Haul off force 2 2 2 2 3 Haul off speed 0-6 0-5 0-5 0-5 0-5 Total power (without extruder) 9.9 18.7 27.5 31 35

YF series PVC profile production line is mainly for producing PVC window profile, according to different profile section and mould to choose different conical or parallel twin-screw extruder and provide relative vacccum sizing tank, haul-off, cutter, stacker and auxiliary equipment. Capacity of main frame can be optionally chosen from 60-700 kgs/hour. The haul-off unit has applied unique lift technique of our co. Its work is stable, its reliability is good, its pulling force is large. Vacuum setting has applied special enlarged vortex cooling system which is good for cooling and calibrating so as to meet demand of high speed extruding. Movement speed and drawing speed of cutting machine keep synchronous. All movements are controlled by imported PLC, the design is reasonable, the operation is stable, it can conduct automatic cutting with fixed length. Powder & dust suction device can be provided. With different molds, the tilter platform can choose such specifications as 4-meter, 6-meter, 8-meter, 11-meter, etc. With twin parallel screws extruder, it is particularly suitable for high speed extruding of profiled material. Model SJZ45/90 SJZ50/105 SJZ55/110 SJZ65/132 SJZ80/156 Motor power 15 18.5 22 30-37 55 Screw diameter 45/90 50/105 55/110 65/132 80/156 Screw rotation speed 34.7 34.7 34.7 34.7 34.7 Output capacity(PVC) 60-80 80-100 120 150-250 250-400 Model YF108 YF180 YF240 YF300 YF400 Max. profile width 108 180 240 300 400 Haul off width 100 100 150 150 150 Haul off force 2 2 2 2 3 Haul off speed 0-6 0-5 0-5 0-5 0-5 Total power (without extruder) 9.9 18.7 27.5 31 35

Modified Bitumen Waterproofing Membrane (Bitumen Membrane) is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moistureproof. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon store and does not generate greenhouse gases. The membrane is therefore a sustainable way of storing carbon on the Earth's surface. Composition of Bitumen Membrane Bitumen - Mixed with a filler (limestone or sand) component such as sand. Polymers are added to the bitumen such as APP (atactic polypropylene) a plastic additive that gives rigidity and tear resistance, or SBS (styrene butadiene styrene) a rubber additive that gives more elastic benefits. Base Material (Reinforcement) - Polyester, fiberglass, etc. These products are bought in roll format and are pulled through the bitumen mixes on huge rollers. Advantages of Bitumen Membrane 1.As well as protecting buildings, bituminous roofing products can be in harmony with their environmental surroundings as different mineral finishes can be applied to the top surfaces. 2.The product is not flowing at high temperature and no crack at low temperature, and it has an extremely long life span. 3.The fumes given off during installation are not harmful to human health and there is low noise pollution during application. 4.Bituminous membrane protects insulation and can reflect harmful sun rays. 5.Bitumen is not water soluble, non-biodegradable, not classified as carcinogenic and does not release harmful toxins.

Advantages: Low maintenance cost Easy operation Low break-down rate (servo structure) Product with high precision Characteristics: 1)The transmission of the main transmission system is carried out by either mean:1) Using a high-strength nylon-based flat transmission belt, in which the stress is even.2) Main motor directly connects to driving shaft. The operation is reliable and smooth, and the rolling mill system has the function of overload protection. 2）The stroke of the saddles is increased, the long-journey rolling is carried out by annular ring type roller, the rotation angle of the roller is changeable, the groove working section is lengthened, the length of deformation zone is increased, and therefore the uniformity of metal deformation in the rolling process is increased, the feed amount can be increased, and the quality of the finished pipe can be improved. 3）The rotary feed system is controlled with German Rexroth AC servo, wherein the feed amount is accurate, reliable and stepless adjustable, the deviation of feed amount is not more than 2%, the size of the rotation angle can be adjusted, the billet will be rotated and fed for two times in the same rolling process, and therefore the distribution of rolling force is even, the axial force is reduced significantly, the high-precision pipe with small deviation of the outer diameter and wall thickness can be obtained, and the yield is high. 4）Compared with side feeding, the rolling mill, which uses end feeding mode, reduces mandrel-removing device; moreover, the position of the mandrel in the deformation zone is accurate, length of mill is shortened, the mode is suitable for the rolling of long billet, and the working efficiency of the rolling mill is improved. 5）Function of loading, unloading, feeding and other procedures are controlled with PLC program,, and therefore the degree of automation is high. 6）The rolling pressure of machine is reduced by using a curve type core bar, and therefore the deformation of the billet metal is even and reasonable. 7）The main gears are provided with hardened tooth grinding process, by which the transmission is smooth, and the noise is low. 8）The main shaft and important gear are made of high-strength alloy steel. 9）The inner surface of the billet used is lubricated to improve the inner surface quality of the pipe, while prolonging the service life of the core bar. 10）The rolling machine uses annular ring type roller, curve type mandrel, as well as the rolling mode of dual rotation and dual feed, and therefore the correction ability to the billet of which the wall thickness is uneven is relatively strong. 11）The equipment has a mandrel fracture detection device, by which the equipment will be automatically stopped in case of the fracture of mandrel, and therefore the equipment can be protected well. 12）A number of patented technologies are applied to the equipment, such as floating type brake, and hydraulic locking nut of the rack. (The feed of the before dead center shall be determined according to the specific rolling condition)

Advantages: Low maintenance cost Easy operation(One person can operate two devices) improved yield (improved by 20% to 30%) Low breakdown rate (servo structure) Product with high precision Characteristics : 1）The continuous feeding and rolling device is increased, and therefore the yield is increased by 20% at least. 2）The transmission of the main transmission system is carried out by either mean:1) Using a high-strength nylon-based flat transmission belt, in which the stress is even. 2) Main motor directly connects to driving shaft. The operation is reliable and smooth, and the rolling mill system has the function of overload protection. 3）The stroke of the saddles is increased, the long-journey rolling is carried out by annular ring type roller, the rotation angle of the roller is changeable, the groove working section is lengthened, the length of deformation zone is increased, and therefore the uniformity of metal deformation in the rolling process is increased, the feed amount can be increased, and the quality of the finished pipe can be improved. 4）The rotary feed system is controlled with German Rexroth AC servo, wherein the feed amount is accurate, reliable and stepless adjustable, the deviation of feed amount is not more than 2%, the size of the rotation angle can be adjusted, the billet will be rotated and fed for two times in the same rolling process, and therefore the distribution of rolling force is even, the axial force is reduced significantly, the high-precision pipe with small deviation of the outer diameter and wall thickness can be obtained, and the yield is high. 5）Compared with side feeding, the rolling mill, which uses end feeding mode, reduces mandrel-removing device; moreover, the position of the mandrel in the deformation zone is accurate, length of mill is shortened, the mode is suitable for the rolling of long billet, and the working efficiency of the rolling mill is improved. 6）Function of loading, unloading, feeding and other procedures are controlled with PLC program,, and therefore the degree of automation is high. 7）The rolling pressure of machine is reduced by using a curve type core bar, and therefore the deformation of the billet metal is even and reasonable. 8）The main gears are provided with hardened tooth grinding process, by which the transmission is smooth, and the noise is low. 9）The main shaft and important gear are made of high-strength alloy steel. 10）The inner surface of the billet used is lubricated to improve the inner surface quality of the pipe, while prolonging the service life of the core bar. 11）The rolling machine uses annular ring type roller, curve type mandrel, as well as the rolling mode of dual rotation and dual feed, and therefore the correction ability to the billet of which the wall thickness is uneven is relatively strong. 12）The equipment has a mandrel fracture detection device, by which the equipment will be automatically stopped in case of the fracture of mandrel, and therefore the equipment can be protected well. 13）A number of patented technologies are applied to the equipment, such as floating type brake, and hydraulic locking nut of the rack. (The feed of the before dead center shall be determined according to the specific rolling condition)

Advantages: Low maintenance cost Easy operation(One person can operate two equipment) Extremely high yield (improved by 60% to 150%) Low break-down rate (servo structure) Product with high precision Characteristics : 1）The high-speed equipment of type 1 uses a multi-shaft balance structure, and therefore the number of rolling is improved by 40% -50% by comparing with that of middle speed. Due to the increase of the continuous feeding and rolling device, the yield is totally increased by at least 60% by comparing with that of the middle-speed shutdown servo equipment. 2）The high-speed equipment of type 2 uses a ‘galaxy’ balance structure, by which the rack can be driven without the connection rod, the inertia force generated in the rolling process can be neutralized further, and the number of rolling and yield can be improved significantly. By taking the type 2 equipment with the high speed of 15 for example, the speed, compared with that of the middle-speed shutdown servo equipment, is improved by 128%, and the yield is totally increased by 148% due to the configuration of the continuous feeding and rolling device. 3）The equipment of type 2 uses the feeding mode of single screw rod, so as to reduce the torque required in the work of the servo motor, and improve the response speed of the carriage. 4）All the high-speed and continuous feeding cold pilgering mills controlled by using 6-7 units of servo motor, and therefore the work of each moving part is more flexible. 5）The equipment is provided with a sliding cover, by which the roller can be replaced quickly, the time consumption is reduced, and the yield is improved. 6）The stroke of the saddles is increased, the long-journey rolling is carried out by annular ring type roller, the rotation angle of the roller is changeable, the groove working section is lengthened, the length of deformation zone is increased, and therefore the uniformity of metal deformation in the rolling process is increased, the feed amount can be increased, and the quality of the finished pipe can be improved. 7）The rotary feed system is controlled with German Rexroth AC servo, wherein the feed amount is accurate, reliable and stepless adjustable, the deviation of feed amount is not more than 2%, the size of the rotation angle can be adjusted, the billet will be rotated and fed for two times in the same rolling process, and therefore the distribution of rolling force is even, the axial force is reduced significantly, the high-precision pipe with small deviation of the outer diameter and wall thickness can be obtained, and the yield is high. 8）Compared with side feeding, the rolling mill, which uses end feeding mode, reduces mandrel-removing device; moreover, the position of the mandrel in the deformation zone is accurate, length of mill is shortened, the mode is suitable for the rolling of long billet, and the working efficiency of the rolling mill is improved. 9）Function of loading, unloading, feeding and other procedures are controlled with PLC program,, and therefore the degree of automation is high. 10）The rolling pressure of machine is reduced by using a curve type core bar, and therefore the deformation of the billet metal is even and reasonable. 11）The main gears are provided with hardened tooth grinding process, by which the transmission is smooth, and the noise is low. 12）The main shaft and important gear are made of high-strength alloy steel. 13）The inner surface of the billet used is lubricated to improve the inner surface quality of the pipe, while prolonging the service life of the core bar. 14）The rolling machine uses annular ring type roller, curve type mandrel, as well as the rolling mode of dual rotation and dual feed, and therefore the correction ability to the billet of which the wall thickness is uneven is relatively strong. 15）The equipment has a mandrel fracture detection device, by which the equipment will be automatically stopped in case of the fracture of mandrel, and therefore the equipment can be protected well. 16）A number of patented technologies are applied to the equipment, such as floating type brake, and hydraulic locking nut of the rack. (The feed of the before dead center shall be determined according to the specific rolling condition)