Modified Bitumen Waterproofing Membrane (Bitumen Membrane) is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moistureproof. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon store and does not generate greenhouse gases. The membrane is therefore a sustainable way of storing carbon on the Earth's surface. Composition of Bitumen Membrane Bitumen - Mixed with a filler (limestone or sand) component such as sand. Polymers are added to the bitumen such as APP (atactic polypropylene) a plastic additive that gives rigidity and tear resistance, or SBS (styrene butadiene styrene) a rubber additive that gives more elastic benefits. Base Material (Reinforcement) - Polyester, fiberglass, etc. These products are bought in roll format and are pulled through the bitumen mixes on huge rollers. Advantages of Bitumen Membrane 1.As well as protecting buildings, bituminous roofing products can be in harmony with their environmental surroundings as different mineral finishes can be applied to the top surfaces. 2.The product is not flowing at high temperature and no crack at low temperature, and it has an extremely long life span. 3.The fumes given off during installation are not harmful to human health and there is low noise pollution during application. 4.Bituminous membrane protects insulation and can reflect harmful sun rays. 5.Bitumen is not water soluble, non-biodegradable, not classified as carcinogenic and does not release harmful toxins.

Advantages: Low maintenance cost Easy operation(One person can operate two equipment) Extremely high yield (improved by 60% to 150%) Low break-down rate (servo structure) Product with high precision Characteristics : 1）The high-speed equipment of type 1 uses a multi-shaft balance structure, and therefore the number of rolling is improved by 40% -50% by comparing with that of middle speed. Due to the increase of the continuous feeding and rolling device, the yield is totally increased by at least 60% by comparing with that of the middle-speed shutdown servo equipment. 2）The high-speed equipment of type 2 uses a ‘galaxy’ balance structure, by which the rack can be driven without the connection rod, the inertia force generated in the rolling process can be neutralized further, and the number of rolling and yield can be improved significantly. By taking the type 2 equipment with the high speed of 15 for example, the speed, compared with that of the middle-speed shutdown servo equipment, is improved by 128%, and the yield is totally increased by 148% due to the configuration of the continuous feeding and rolling device. 3）The equipment of type 2 uses the feeding mode of single screw rod, so as to reduce the torque required in the work of the servo motor, and improve the response speed of the carriage. 4）All the high-speed and continuous feeding cold pilgering mills controlled by using 6-7 units of servo motor, and therefore the work of each moving part is more flexible. 5）The equipment is provided with a sliding cover, by which the roller can be replaced quickly, the time consumption is reduced, and the yield is improved. 6）The stroke of the saddles is increased, the long-journey rolling is carried out by annular ring type roller, the rotation angle of the roller is changeable, the groove working section is lengthened, the length of deformation zone is increased, and therefore the uniformity of metal deformation in the rolling process is increased, the feed amount can be increased, and the quality of the finished pipe can be improved. 7）The rotary feed system is controlled with German Rexroth AC servo, wherein the feed amount is accurate, reliable and stepless adjustable, the deviation of feed amount is not more than 2%, the size of the rotation angle can be adjusted, the billet will be rotated and fed for two times in the same rolling process, and therefore the distribution of rolling force is even, the axial force is reduced significantly, the high-precision pipe with small deviation of the outer diameter and wall thickness can be obtained, and the yield is high. 8）Compared with side feeding, the rolling mill, which uses end feeding mode, reduces mandrel-removing device; moreover, the position of the mandrel in the deformation zone is accurate, length of mill is shortened, the mode is suitable for the rolling of long billet, and the working efficiency of the rolling mill is improved. 9）Function of loading, unloading, feeding and other procedures are controlled with PLC program,, and therefore the degree of automation is high. 10）The rolling pressure of machine is reduced by using a curve type core bar, and therefore the deformation of the billet metal is even and reasonable. 11）The main gears are provided with hardened tooth grinding process, by which the transmission is smooth, and the noise is low. 12）The main shaft and important gear are made of high-strength alloy steel. 13）The inner surface of the billet used is lubricated to improve the inner surface quality of the pipe, while prolonging the service life of the core bar. 14）The rolling machine uses annular ring type roller, curve type mandrel, as well as the rolling mode of dual rotation and dual feed, and therefore the correction ability to the billet of which the wall thickness is uneven is relatively strong. 15）The equipment has a mandrel fracture detection device, by which the equipment will be automatically stopped in case of the fracture of mandrel, and therefore the equipment can be protected well. 16）A number of patented technologies are applied to the equipment, such as floating type brake, and hydraulic locking nut of the rack. (The feed of the before dead center shall be determined according to the specific rolling condition)

Special rollers design, more precise and solid Shaft diameter: 75 or80mm, according to profile Wall plate 18mm thick Mitsubishi PLC and converter Tool box and technical support

3+3 pressing machine greatly reduces the workers labor intensity, save labor time, and increase production efficiency. This machine requires no foundation work, which results in less site area and reduced capital investment. This device uses a contact heater, can set the pre-heating time and also can automatically disconnect the power supply during the worker's operation, make sure safe and reliability. This equipment adopts left and right alternate pressing. The left mold is in the process of pressing. The worker operates the right mold. When the right mold is used for stamping, the left mold is assembled. The time of one cycle greatly improves the working efficiency. The hydraulic system features self-starting and self-stop technology. The machine is equipped with a 7-inch touch screen, use human-machine interface and easy to operate.

Special rollers design, more precise and solid Solid shaft diameter 75 or 80mm according to design Pillar structure and gear transmission Mitsubishi PLC and converter Tool box and technical support Fly cutting system

Advantages: Low maintenance cost Easy operation(One person can operate two devices) improved yield (improved by 20% to 30%) Low breakdown rate (servo structure) Product with high precision Characteristics : 1）The continuous feeding and rolling device is increased, and therefore the yield is increased by 20% at least. 2）The transmission of the main transmission system is carried out by either mean:1) Using a high-strength nylon-based flat transmission belt, in which the stress is even. 2) Main motor directly connects to driving shaft. The operation is reliable and smooth, and the rolling mill system has the function of overload protection. 3）The stroke of the saddles is increased, the long-journey rolling is carried out by annular ring type roller, the rotation angle of the roller is changeable, the groove working section is lengthened, the length of deformation zone is increased, and therefore the uniformity of metal deformation in the rolling process is increased, the feed amount can be increased, and the quality of the finished pipe can be improved. 4）The rotary feed system is controlled with German Rexroth AC servo, wherein the feed amount is accurate, reliable and stepless adjustable, the deviation of feed amount is not more than 2%, the size of the rotation angle can be adjusted, the billet will be rotated and fed for two times in the same rolling process, and therefore the distribution of rolling force is even, the axial force is reduced significantly, the high-precision pipe with small deviation of the outer diameter and wall thickness can be obtained, and the yield is high. 5）Compared with side feeding, the rolling mill, which uses end feeding mode, reduces mandrel-removing device; moreover, the position of the mandrel in the deformation zone is accurate, length of mill is shortened, the mode is suitable for the rolling of long billet, and the working efficiency of the rolling mill is improved. 6）Function of loading, unloading, feeding and other procedures are controlled with PLC program,, and therefore the degree of automation is high. 7）The rolling pressure of machine is reduced by using a curve type core bar, and therefore the deformation of the billet metal is even and reasonable. 8）The main gears are provided with hardened tooth grinding process, by which the transmission is smooth, and the noise is low. 9）The main shaft and important gear are made of high-strength alloy steel. 10）The inner surface of the billet used is lubricated to improve the inner surface quality of the pipe, while prolonging the service life of the core bar. 11）The rolling machine uses annular ring type roller, curve type mandrel, as well as the rolling mode of dual rotation and dual feed, and therefore the correction ability to the billet of which the wall thickness is uneven is relatively strong. 12）The equipment has a mandrel fracture detection device, by which the equipment will be automatically stopped in case of the fracture of mandrel, and therefore the equipment can be protected well. 13）A number of patented technologies are applied to the equipment, such as floating type brake, and hydraulic locking nut of the rack. (The feed of the before dead center shall be determined according to the specific rolling condition)

Meiste Mats has heated stairway mats, heated walkway mats, heated door mats and even heated driveway mats from HOTflake.  Yes, these heated mats are strong enough to withstand the heavy weight of cars, SUV’s etc. and can be safely used on driveways. With lowest price in the market and direct sale from the factory, Meiste is meant to explore the north America market. Global Agents Wanted Click for more details Shipping Category Floor Cleaning/ Sapce Heating/ Roof Snow Melting/ Passageway Snow Melting/ Car Windshield Heating Pad

Our production line including up decoiler and down decoiler, each decoiler has coil car, hydraulic station, decoiler body, our company has two type decoilers ,one has assist support device, the other do not has the assist support device. 1)The decoiler has two type. One type with assist support, the other without. 2)Two control type, one is using light switch ,the other is 3)Support design: The structure is more reliable than the hinged type frame, and 5Ton hydraulic can not working stable for a long time without this support design. 4)Coil drum: four pcs nest, provide 508mm and 610mm two size, when the coil inner diameters want to change into 610, can assembling the four arc plate and insure the hydraulic expand lock to insure the expand force. 5)Assistant supporter：during the production of PU continuous line, it needs to reduce the connection of steel coils, so the loading requirement of uncoiler is high. Meanwhile, in order to avoid the drooping of main shaft and off tracking of steel coil, uncoiler adopts assistant supporter to guarantee the loading of 10T coil without the deformation of main shaft. The assistant supporter of uncoiler adopts quick hinge type, operation is very convenient, so that the production line will not stop during the connection of steel coils’ends. 6)The assistant supporter of uncoiler adopts quick hinge type, operation is very convenient, so that the production line will not stop during the connection of steel coils’ends. 7)Above mentioned measures can guarantee the changing time of steel coil within 45 seconds; 8)Drive system：positive and negative rotation carry out the uncoiling and recoiling, the main shaft of uncoiler is driven by motor and reduction box to carry out the active uncoiling,and also used for recycling of unfinished production steel panel. When active uncoiling，the speed can be synchronous with production line, there is ultrasonic wave detecting for tracking the speed of main line, whole process is frequency conversion controlled; 9)Uncoiler has material pressing unit, which is fixed above with the angle 30-40°, avoid collision with up machine machine frame; 10)Lifting table：oil hydraulic motor drives lifting table move along the guide rail, the guide rail is lengthened to avoid collision of steel coil and up machine machine frame.

Advantages: Low maintenance cost Easy operation Low break-down rate (servo structure) Product with high precision Characteristics: 1)The transmission of the main transmission system is carried out by either mean:1) Using a high-strength nylon-based flat transmission belt, in which the stress is even.2) Main motor directly connects to driving shaft. The operation is reliable and smooth, and the rolling mill system has the function of overload protection. 2）The stroke of the saddles is increased, the long-journey rolling is carried out by annular ring type roller, the rotation angle of the roller is changeable, the groove working section is lengthened, the length of deformation zone is increased, and therefore the uniformity of metal deformation in the rolling process is increased, the feed amount can be increased, and the quality of the finished pipe can be improved. 3）The rotary feed system is controlled with German Rexroth AC servo, wherein the feed amount is accurate, reliable and stepless adjustable, the deviation of feed amount is not more than 2%, the size of the rotation angle can be adjusted, the billet will be rotated and fed for two times in the same rolling process, and therefore the distribution of rolling force is even, the axial force is reduced significantly, the high-precision pipe with small deviation of the outer diameter and wall thickness can be obtained, and the yield is high. 4）Compared with side feeding, the rolling mill, which uses end feeding mode, reduces mandrel-removing device; moreover, the position of the mandrel in the deformation zone is accurate, length of mill is shortened, the mode is suitable for the rolling of long billet, and the working efficiency of the rolling mill is improved. 5）Function of loading, unloading, feeding and other procedures are controlled with PLC program,, and therefore the degree of automation is high. 6）The rolling pressure of machine is reduced by using a curve type core bar, and therefore the deformation of the billet metal is even and reasonable. 7）The main gears are provided with hardened tooth grinding process, by which the transmission is smooth, and the noise is low. 8）The main shaft and important gear are made of high-strength alloy steel. 9）The inner surface of the billet used is lubricated to improve the inner surface quality of the pipe, while prolonging the service life of the core bar. 10）The rolling machine uses annular ring type roller, curve type mandrel, as well as the rolling mode of dual rotation and dual feed, and therefore the correction ability to the billet of which the wall thickness is uneven is relatively strong. 11）The equipment has a mandrel fracture detection device, by which the equipment will be automatically stopped in case of the fracture of mandrel, and therefore the equipment can be protected well. 12）A number of patented technologies are applied to the equipment, such as floating type brake, and hydraulic locking nut of the rack. (The feed of the before dead center shall be determined according to the specific rolling condition)

Improved efficiency and throughput Cascading material combines with material from the rotor to form a denser particle population, which optimises reduction by increasing the chance of a good rock-on-rock collision. This most efficient use of the rock on-rock crushing action leads to improved crusher efficiency and increased throughput, giving the operator more value for money by providing more inter-particle action where it is needed most in the crushing chamber. The unmatched producer of superior concrete and asphalt aggregate Less cement can be used and stronger concrete created by using Barmac S-Series VSI product. The Barmac S-Series VSI combines high velocity impact crushing with high pressure attrition grinding to produce high volumes of cubically shaped product. Continuous control of the product shape and gradation provides a product which meets the size distribution required. A proven producer of quality manufactured sand Superior particle shape and consistent gradation are a direct result of the rock-on rock principle of the S-Series VSI crusher. Impact, grinding and abrading within the crusher simulates the action of nature, eroding the particles to a cubical shape. The only viable crusher for extremely abrasive fine material The rock-on-rock crushing principle of the Barmac S-Series VSI minimises metallic wear resulting in low maintenance and wear costs. The low wear of internal components ensures extremely low contamination of fi ne products by wearing metal parts. The User-Friendly VSI crusher The roof lifter has been developed to provide quick and easy access to the internal workings of the Barmac S-Series VSI. This allows for rapid rotor and wear part changes and minimises down time while maximising availability. The simple and reliable design of the roof lifter means only one person is required for operation and can eliminate the requirement for an external crane. The cascade feed system The Barmac S-Series VSI uses the cascade feed system to introduce a second stream of material, in a controlled quantity, into the crushing chamber turbulence. This causes a supercharging of the particle population within the chamber, thereby improving the energy transfer between the particles. The cascade feature enables the operator to make optimal use of the power available and to manipulate the product grading and shape to best suit their requirements. The cascade feed system provides: • Higher crusher throughputs for the same power consumption. • Maximum use of available power without fear of motor overload. • Gradation control to optimise product fractions. • ‘Free’ crushing at no extra expense to the operator. • Shape control. Applications: Mining, metallurgy, construction, highway, railroad, and water conservancy, etc. The S Series Vertical Shaft Impact(VSI) crusher was improved on basis of the technology of Barmac,it has had a huge impact on the global quarrying and minerals processing industries. The Barmac S-Series VSI is unique due to its crushing process. Whereas most other types of crusher use metallic parts to crush rock, the Barmac VSI uses the rock fed into the machine to crush itself. This autogenous crushing process produces the best-shaped aggregate on the market today. The high velocity impact crushing achieved in a Barmac S-Series VSI improves the soundness and shape of stone, reducing product moisture and easing the screening task while producing superior products at a minimum cost.

Rock wool storing and lifting is used for meeting the requirement of feeding the rock wool continuously. Use forklift truck to carry the pile rock wool onto the transmission roller and then start the motor. Photo-electricity switch is used to control the lifting position. We adopt continuous scraper system to feed the rock wool into the slitting machine. This machine has the function of auto storing and conveying.

Special rollers design, more precise and solid Shaft diameter: 55mm or more, according to profile Wall plate 18mm thick Mitsubishi PLC and converter Tool box and technical support