Application area Mainly used in color paste and pesticide formulation. It's suit for medical laboratories, biological research, cosmetic and colleges laboratories. Applied in the field of dispersing and dissolving of liquid and liquid or solid and liquid with various viscosity levels. Characterstics • The structure of machine is designed according the principle of the sand mill, the experimental results can be enlarged and can could direct the production. • With frequency inverter,the machine could adjust speed according to the process characteristics of the material, could collect optimum parameters. • Such as temperature and pressure The parameters controlled by PLC ,can make ensure the safety of production and the equipment run fully to meet the technological requirements. • With imported diaphragm pump. • Fineness 100nm. • The whole structure is reasonable, running safety.

The lab sand mill is widely used in laboratory in different industry, such as painting, ink, pesticides, operating simply, using conveniently.

Applicable industry: The two-shaft mixing disperser is applicable to the chemical industry, such as printing ink, paint, coating and pigment, etc. Function: This machine is suitable for product dispersing, mixing, blending and other production processes. Operating principle: The disperser is not only able to disperse the materials with low fineness requirement but also blend them into final products directly. Disperser's sawtooth-shaped dispersing impeller intensely stires the paste in the vessel while rotating at high speed. The material particles become finer particulates during strong impact and shearing force. The mixing impeller blade is fabricated according to the size of material tank in order to fully disperse the materials inside the tank and meet production process requirements. Tips: You can raise processing amount, equipment form, size requirements or the property of the materials you need to process. Sower's sales engineers will provide you with the solutions to your satisfaction.  Characteristics 1. More sufficient processing of the materials 2. Hydraulic lift ensures stability and reliability 3. Large power with stronger processing ability 4. Two-shaft mixing form 5. With CE & ISO 9001:2015 qualifications

Technique ∙The dissolver is a fast, high-capacity disperser with a wide range of speeds and high level of efficiency ∙Push-button speed control ∙Speed indicator and automatic speed reduction ∙The product is accelerated radially by the dispersion disk, deflected to the top and bottom at the tank wall and directed back to the dispersion disk through formation of a vortex ∙Shear forces around the circumference of the toothed disk result in highly efficient dispersion, good wetting and deagglomeration ∙For high-viscosity products, a tank wall scraping device can aid the mixing and dispersing process ∙Hydraulic lifting/lowering device ∙Push-button stroke adjustment ∙Adjustable tank clamping mechanism ∙Stainless steel shaft and dispersion disk; additional product-specific mixing tools available depending on the application ∙Manufactured in accordance with CE guidelines Options ∙Application-specific tank cover designs ∙Vacuum design ∙Scraping device for tank wall ∙Temperature sensor ∙Timer ∙Design for ceiling installation with hinged head ∙Various explosion protection ratings ∙Special tank clamping mechanisms ∙PLC-controlled units Advantage ∙ Easy handling which reduces costs and time ∙ Customized solutions on request ∙ A wide range of variously equipped versions available for highest process safety ∙ Various, easily exchangeable mixing tools to increase the efficiency ∙ Temperature measurement by wand or agitator shaft which increases the reliability of the production process ∙ Optimal positioning of the mixing tool via hydraulic lifting/lowering device ∙ Dissolver only starts When the vessel is correctly positioned ∙ At the lowest possible speed ∙ Two-handed operation for lifting/lowering of the tank cover (optional design) ∙ Automatic switch-off, if the toothed disks are lifted above the level of the tank ∙ Protection against accidental contact with the rotating shaft ∙ Bellows serving as dust protection for the shaft

Characteristics ●This machine has stable structure ,ingenious design design and convenient operation. ●Cleaning、changing colour and replacing mill bead can be much easier. ●Non –vestigital design, it can solve the problem of material discharging better after milling. ●Hard alloy sticks, with proper redistribution, high-efficiency milling result can be obtained. ●Double cooling of inner rotor and outer jacket ensures effect of material cooling. ●Better lining of wear-resistant alloy, without pollution to materials. ●With less abrasion of milling media and cost.

Application area Suilable for printing ink, solvent ink, water-based ink, automobile paint, industrial coating, pigments, color paste, and nanometer materials. Characteristics • New design of pin-type grinding components, high grinding efficiency high output, and low energy consumption. • With smaller length/diameter ratio and higher energy density. • Using high flux static centrifugal separation sieve, large discharging area, grinding medium no contact with the sieve, no abrasion, with longer service life. • Grinding Barrel and grinding rotor adopt forced cooling system, with lower discharging temperature and no influence on sensitive materials. • Using top high quality wear-resisting alloy steel, reduce pollution to products. different materials are optional as per different products, such as stainless steel, high polymer materials, ceramics, etc. Product Advantages： •Novel structure, high stability •Strengthened frame with reasonable structure, steady operation and easy maintenance. Besides, nicer appearance with full of modern sense. •The main parts an out-sourced parts areinternationall renowned brands with higher stability and longer service life.Easy to clean, strong durability •Unique tri-pole mechanism design makes it easy to open for cleaning and replacing grinding chambers. •The grinding chamber, made of high wear-resistance alloy steel, is treated specially torealize higher wear resistance and longer service life. In addition, Burgmann Dual-end Mechanical Seal with self-lubricating system contributes directly to higher reliability and durability.Safe monitor, stable product •The machine is with triple cooling: internal, external, and end face, which ensures   the grinding heat exchanged out in time. •The water temperature, material temperature, material pressure,water pressure, air pressure and other real-time monitoring and protection system ensure proper operation of the machine.Full specification, can be      customized •Specifications ranges from 5L to 50L, which can be customized to be Exproof type.  Working Principle The delivery pump circulates the materials in the tank and the materials in the grinding chamber. The main shaft in the grinding chamber is equipped with many pins with high anti-abrasiveness and hardness. The pins drive the grinding medium inside the grinding chamber to do irregular movements in all direction to put the materials underthe action of constant collision and friction. At same time, the materíals are separated from the grinding medium by the sieve and keep circulating from the tank to the grinding chamber to obtain smaller particle size, narrower particle size range.

Principle It's a wet process milling equipment which can produce continuously, its working principle is the power delivered from high-speed rotor to milling medium and liquid product, through mutual colliding and laminating, ultrafine size can be achieved. Characteristics • High flux―technology imported from Germany: static centrifugal discharging devices, large discharge area with high output. • Double mechanical seal, lubricating liquid dissolves with material, safe and reliable. • Grinding area is made of special anti-wearing alloy ensuring long service life. • Cooling efficiency: segmented double helix waterway which is more advantageous to the energy exchange. Cooling efficiency is 2 times better than ordinary types. • Intelligent double mechanical seals: German mechanical seal technology, imported- fluorine sealing rings can resist different solvents. • Grinding efficiency: increased to more than 30% compared with regular models, the combination of the disperser can rapidly improve dispersion efficiency. The grinding medium can be superfine size to be more efficient. Product Advantages • Low energy consumption ratio, High cost-effective • With large and small belts to conveyor driving force from the motor the main shaft, it is easy to start. The grinding discs are specially designed to have higher effiency and lower electricconsumption. It is machine with higher performance-cost ratio among the grinding machines.Easy to clean and operate • The machine is with integrated on-spot control panel, easy to do operation. Following structures to make it is easy to clean the grinding chamber and the beads to produce materials with different color and varieties with beads collection hopper, the pulley gear device to make it easy for assemble and disassemble the grinding chamber and frame.Safe monitor, stable finished product • Grinding chamber is with cooling jackets. Input cooling water into the jacket when running to have good cooling result, normally the temperature increase will be within 10C. • The machine is with temperature and monitor control. With settable protection value to ensure the quality of the finished products. • Full specification, can be customized • Specifications ranges from 30L to 100L, which can be customized to be Exproof type. Grinding chambers made of Polyurethane or Zirconium are in option to ensure its     anti-abrasiveness and alsoto prevent materials from metal pollution. Working Principle  The delivery pump circulates the materials in the tank and the materials in the grinding chamber. The discs drive the grinding medium inside the grinding chamber to do irregular movements in all direction to put the materials under the. action of constant collision and friction. At same time, the materials are separated from the grinding medium by the sieve and keep circulating from the tank to the grinding chamber to obtain smaller particle size, narrower particle size range.

Application area Dispersing and milling in the field of coating, paint, printing ink, agricultural chemical, etc. Characteristics • Adopts double mechanical seal, lubricating liquid dissolves with product, safety and reliability. • Multiple material can be chosen for dispersing disc, catering to customer requirements for product color difference. • Body is convenient to be disassembled, easy to clean and for different color products. •The machine is easy to do operation, good reliability and full specification. It is a most widely used liquid grinding machine in the market with mature performance and structure. The machine uses dual-end mechanical seal with closed self-lubricate system with good reliability and durability. The machine is also with temperature, pressure monitor and protection to ensurethe quality of the finished product. It is with the advantages such as high grinding efficiency, good grinding fineness, wide. application and good anti-abrasiveness etc. •Materials Viscosity :  ≤20000 cps •Production Capacity:  20-1000L •Application Industry :  Suitable for dispersing, grinding materials in a variety of     applications such as  biology, pharmacy, cosmetic, food, paint, ink, color paste, dyestuff, fertilizer etc. Product Advantages •Low energy consumption ratio, High cost-effective •With large and small belts to conveyor driving force from the motor the main shaft,  it is easy to start. The grinding discs are specially designed to have higher effiency and lower electricconsumption. It is machine with higher performance-cost ratio among the grinding machines.Easy to clean and operate •The machine is with integrated on-spot control panel, easy to do operation.        Following structures to make it is easy to clean the grinding chamber and the beads  to produce materials with different color and varieties With beads collection hopper, the pulley gear device to make it easy for assemble and disassemble the grinding chamber and frame. Safe   monitor, stable finished product •Grinding chamber is with cooling jackets. Input cooling water into the jacket when running to have good cooling result, normally the temperature increase will be within 10C. •The machine is with temperature and monitor control. With settable protection value to ensure the quality of the finished products. •Full specification, can be customized •Specifications ranges from 5L to 100L, which can be customized to be Exproof type. Grinding chambers made of Polyurethane or Zirconium are in option to ensure its     anti-abrasiveness and alsoto prevent materials from metal pollution. Working Principle The delivery pump circulates the materials in the tank and the materials in the grinding chamber. The discs drive the grinding medium inside the grinding chamber to do irregular movements in all direction to put the materials under the. action of constant collision and friction. At same time, the materials are separated from the grinding medium by the sieve and keep circulating from the tank to the grinding chamber to obtain smaller particle size, narrower particle size range.

Principle The milling basket, containing thegrinding bead is lowered into the millbase, the fast circulation of the millbase within the milling basket is generated by the dissolver disc and integrated pump wheel, a very narrow particle size distribution can be achieved very quickly. Characteristics： ● Suita for producing small batch product and middle test. Dispersing and grinding are finished in one machine and one container, no need extra pumps, piping, valves etc . ● Easy cleaning, no residues, convenient product replacement. ● Little grinding media required.Excellent grinding efficience and effect. ● Double-walled container for cooling and heating. ● Modular design of parts make it much more convenient to disassemble, maintain and overhaul, almost no need of professional maintainer. Materials Viscosity:  ≤ 5000 cps Production Capacity:  50-3000L Application Industry: Suitable for dispersing, grinding materials in industries such as biology.pharmacy, cosmetic, food, paint, ink, color paste, dyestuff, fertilizer etc. Applicable Materials:  Materials shall be with viscosity less than 5000cps, with comparatively high  requirements of final grinding result or with many varieties such as   emulsion paint, industrial paint, color paste, water-borne ink, fertilizer suspension, etc Product Advantages ● High grinding efficiency and excellent grinding result Driven by the strong kinetic energy, the zirconium pins drive the grinding medium inside the basket to carry out irregular movement. The mediums crush, friction with each other to grind the powder into smaller particle size within a short period. For general materials, it can be down to approx. 5um, some even can be down to submicron or even nano level. ● Convenient and safe operation Adopt hydraulic tank as liting actuator. Control the hydraulic up, stop, down through the oil pump, easy operation and stable.With different clamping types to fix the tanks properly to prevent from accident due to the tank displacement during operation.Little temperature increase, stable finished product. The tank working with the machine is with cooling jacket. Excellent cooling result can be achieved by inputting cooling water into the jacket when the machine is running . Normally thetemperature increase will be less than 10. Basket part with jacket can be customized.Customized options ● The machine can be Exproof type. ● Grinding chamber can be made of Zirconium. ● The machine can be vacuum type. ● The materials for the machine can be SS316L Working Principle The rotating motor drives the pins and dispersing disc to rotate at high speed, which makes the upper part of dispersing disc and inner grinding chamber become vacuum. The slurry is inhaled into grinding  chamber. The grinding medium driven by the driving pin inside the chamber produces force in all directions,which put materialsunder the action of constant collision and friction to smaller the particle size andnarrow the particle size range. The vortex flow generated by high speed rotation dispersing disc   absorbs materials out from the basket (grinding chamber), and the milled materials are absorbed again, excellent dispersing and grind result will be achieved. Lift the hydraulic piston by running the hydraulic pump to have the driving mechanism and grinding chamber lift up and down.

Standard Configuration : CNC sheetmetal pressbrake with streamlined desigh,hight speed ,hight precision,hight rigidity. Electro hydraulic servo system,full loop comtrolling the synchronizatio of the upperbeam. Equip with hydraulic crowning compensation on worktable and deformation compensation device on throat to make sure bending depth and precision. Backgauge is driven bu digital servo motor,moved by ball screw guided by linear guide. What should we know for choosing a press brake ? What’s your material of sheet ? What’s the minimum and maximum thickness of your sheet ? What’s the minimum and maximum width of your sheet ? What kind of product you make ? What’s the precision do you require for making products ? Machine Details: V-axis Table Compensation : V-axis is the CNC axis to control the adding convex amount of workbench, it can obtain accurate deflection compensation from the workbench. The adding convex workbench is made up of a group of beveled convex wedge, each wedge slope is designed by the deflection curve of finite element analysis of the slider and workbench vertical plate. CNC controller will calculate the required deflection amount according to the load when the work piece is working (The load will lead to the deflection and deformation), automatically control the relative motion of the convex wedge, and finally get an ideal work piece.

Main Structure Features The compacting press is a mechanical crank connecting rod type of hydraulic pressure assisted powder forming machine; It is a high strength steel plate welding structure with stable mechanical structure toughness, good rigidity and high precision as well as stable production quality; The compacting press has the ability of mold and mandrel step forming; Using the touch screen control, improving the operation. With a various fault description and easy trouble shooting, the compacting is easy to maintain; It has the modular floating frame, which can be disassembled independently; Combined pneumatic clutch and brake make the compacting power press machine has fast response speed with high safety.

Purpose of Machine Tool: SIO-CM300L CNC Cam Milling Machine (Linear Guide Rail) is a modern machine with high efficiency, high precision and high rigidity. It was developed by SIO company and has patents issued by the SIPO. It is mainly used for half finishing or finishing camshafts like S type brake camshafts. Machining cams become very fast and easy. The machine can improve the production efficiency, machining accuracy and saving the cost of human resources. It is the ideal processing machine for automobile, mechanic and other manufacturing industries. General Description & Main Features: Machine Bed The machine bed made by high-grade cast is implemented in stable horizontal framework in order to provide high accuracy and consistent repeatability. The outstanding sturdy machine body is heat treated to relieve stresses. In line with the torsion resisting and sturdy construction, the linear guide rail slider is equipped with ball screws which have high stiffness, accuracy and excellent dynamic performance. Each of these units is driven via high precision servo motor, complete with position feedback system. The work pieces are processing on the precision index head. Patents technology ensures the work piece has high degree of symmetry and rapid positioning. Milling Heads The milling heads mounted on the slides located. Adopt independent unit to ensure good movement precision, stiffness and stability. The drive of the milling heads is conducted via an AC vector motor and via a belt drive to the headstock input pulley. Hydraulic Unit The hydraulic unit is a unit connected to the chuck via generously dimensioned hydraulic piping. The hydraulic oil is cooled using an oil heat exchanger. Dual hydraulic chuck makes automatic clamping. The chuck has internal blowing clearance system. Horizontal positioning with hydraulic lifting. Rapid back after installation. Electrical control Relevant parts of the electrical control system of the machine are contained in a switch gear cabinet. Operating Panel The machine is equipped with a computer numerical control system Siemens 808D with USB port. Mobile manual pulse generator is equipped to easy operate. Accessory Integrated automatic lubrication system makes the maintenance more reliable. Configuration cooling pump and enclosed shield. Equipped automatic chip removal device. Optional Accessories (Extra Price): NC system such as FANUC，Siemens,GSK or KND is available for your selection.