Brief Introduction YX soft candy production  line is an advanced equipment for producing various shapes and colors of gelatin/pectin/carrageenan candy. It is an ideal equipment for continuous production of high quality candy (QQ candy), such as single/double-color QQ candy  High-degree automation ensures of stale production and saves time, labor force and occupation to serve purpose of reducing the cost Soft candy making process Stirring gelatin/pectin-- Sugar melting--Storage tank--Depositing and cooling--Drying room--Packing The functions of each machine. 1) 6E3 mixer: Stirring dry gelatin and water for 15 minutes and puttng into warm holding tank for prepare. 2) Sugar melting tank: heating sugar, glocose, water  to 120 degrees. 3) Storage tank: storage the sugar syrup and and filting pure syrup. 4)Deposting and Cooling: depositing the sugar syrup into different candy mouds, and cooling by the AC. 5)Drying room: install dehumidifier and drying machine for soft candy 6) Packing machine: various packing machine available. Technical Parameters Model YX-150 YX-300 YX-450 YX-600 Standard   Output 150kg/h 300kg/h 450kg/h 600kg/h Candy   Wight over 5g Depositing   Speed 40-45n/min Working Requirement Room Temperature: 20~25℃ Humidity: 40-45% Total Power(steam heating) 16kw/380V 26kw/380V 32kw/380V 36kw/380V Total Length 15m 18m 18m 20m Total Weight 3000kg 4050kg 5000kg 6000kg Tips on  the soft candy production line: 1) Adding the gelatin in the storage tank when the syrup is 90 degrees. 2) The whole line equipped the international motor: ABB motor, Danfoss invertor, Mitsubishi PLC control, servo motor, copland AC, SS materials 3) Heating by steam or electric 4) Essence and pigment pump installed with the machine. 5) Various shapes soft candy can be produced by changing  moulds 6) Candy size and weight effects the final output 7) One or two colors soft candy can be made Pictures and final soft candy samples:

Remote Control Hopper Remote Control Hopper is used for loading cargo whose size is different. The hopper is also used for transporting cargo from storage and lading, which leaves out unloading and loading in the yard. The lading efficiency is higher.

Brief Introduction YX Chocolate Bean Production Line, confrms to the food GMP standard,  is an advanced equipment for producing bean/egg/MM shapes chocolate.  High-degree automation ensures of stale production and saves time, labor force and occupation to serve purpose of reducing the cost Chocolate chip making process Sugar grinding--Cocoa butter melting-- Conche --Storage tank --Forming and cooling --Packing The functions of each machine. 1) Sugar grinding machine: Grinding sugar to sugar powder 2) Cocoa  butter melting tank: jacket layers inside warm water, electric or steam heating, melting cocoa butter for 30-60 minutes, temperature is around 55-60 degrees 3) Conche:adding grinded sugar powder, coco powder, lecithin and cocoa syrup and so on into the conche for grinding 14 hours 4) Storage tank: Stirring the conched syrup for 3-4 hours until the bubbles disappear 5)Forming and Cooling: Two moulds rollers squeezing the bean chocolate, cooling and seperate the extra part 6) Packing machine: various packing machine available. Technical Parameters Model YX400 YX600 Roller Length(mm) 400 600 Belt Width(mm) 500 700 Roller Revolution Speed(round/min) 0.3-1.5 0.3-1.5 Output: (kg/h) 100-150 150-225 Dimenstion(mm) 8620*1040*1850 8620*1250*1850 Cooling Tunnel Layers 3 3 Total Power( kw) 20 28 Tips on  the chocolate bean production line: 1) The whole line equipped the international motor: ABB motor, Danfoss invertor, Mitsubishi PLC control, Servo motor, SS materials 2) Heating by steam or electric 3) Egg, bean and MM shapes chocolate can be made 4) accurate depositing, tast better. Pictures and final chocolate bean samples:

Brief Introduction YX  Hard Candy Production Line, confrms to the food GMP standard, is an advanced equipment for producing various shapes and colors of  hard candy. ideal equipment for continuous production of high quality single and double color hard candy. High-degree automation ensures of stale production and saves time, labor force and occupation to serve purpose of reducing the cost Hard candy making process Sugar melting--Storage tank-- Micro-film cooker --Depositing and cooling--Packing The functions of each machine. 1) Sugar melting tank: heating sugar, glocose, water  to 110 degrees. 2) Storage tank: storage the sugar syrup and and filting pure syrup. 3) Micro-film cooker: cooker the syrup again to 145 degrees for better taste, moisture is lower then 2%, suits for international standard. 4)Deposting and Cooling: depositing the sugar syrup into different candy mouds 5) Packing machine: various packing machine available. Technical Parameters Model YX-150 YX-300 YX-450 YX-600 Standard Output 150kg/h 300kg/h 450kg/h 600kg/h Max.Candy Weight over 4 gram Depositing Speed 40-45/min 40-45/min 40-45/min 40-45/min Steam Requirement 0.2m³/min, 0.4-0.6Mpa 0.2m³/min, 0.4-0.6Mpa 0.2m³/min, 0.4-0.6Mpa 0.2m³/min ,0.4-0.6Mpa Working Requirement Room Temperature: 20~25℃ Humidity: 55% Total Power 18kw/380V 27kw/380V 34kw/380V 38kw/380V Total Length 15m 17m 17m 20m Total Weight 3500kg 4000kg 4500kg 5000kg Tips on the hard candy production line: 1) The whole line equipped the international motor: ABB motor, Danfoss invertor, Mitsubishi PLC control, servo motor, SS materials 2) Heating by steam or electric 3) Essence and pigment pump installed with the machine. 4) Various shapes hard candy can be produced by changing  moulds 5) Candy size and weight effects the final output 6) One/ two colors/center fillied hard candy can be made 7) 260 pieces candy moulds for the 150 type, 520 pieces for the 300 type Pictures and final hard candy samples:

More than 45 years of professional manufacturing experience, WUXI TBS SCIENCE AND TECHNOLOGY CO., LTD have been one of the leading manufacturer in China,mainly specialize in ERW Tube&Pipe Mill Line, Slitting Line, Cut To Length Line, etc. Throughout many decades team efforts for improvement of superior product quality and pursuit of advanced technology, we have widely won high praise from domestic and overseas customer. We always keep strong faith in “Thinking for what customer think”. Our mission: “Customized Technical Support,Most Cost-Effective Commerical Solution,High Performace Machine Supply,Reliable Service After-Sales” TDG Series Directly Forming to Square and Rectangular Tube Mill Only one set of rollers can be continuously produced within a certain range of rectangular steel pipe, using the international advanced multi-radius combination molding process and high-frequency welding, forming by multi-channel symmetrical bending. It can be divided into small side bending, boardside bending, free bending at closed side, high frequency welding, precision straightening, produce the exact size and good quality pipe after cut off. Characteristic： ·One set mold roller can produces a range of rectangular tubes. ·This machine has characteristics such as no replace spindle, no remove roller stand and quick change rollers. ·Save mold, save time. ·Four square corner deformation part which can save extra deformation process then save energy consumption and equipment load. Specification of Directly Forming to Square and Rectangular Tube Mill SPEC TDG120X120 TDG150X150 TDG200X200 - Material to be processed Carbon Steel, strip coils of weld able grade with max. 0.2% carbon Carbon Steel, strip coils of weld able grade with max. 0.2% carbon Carbon Steel, strip coils of weld able grade with max. 0.2% carbon - Type Square & Rectangular tube Square & Rectangular tube Square & Rectangular tube Square 60 x 60 – 120 x 120 mm 70 x 70 – 150 x 150 mm 80 x 80 – 200 x 200 mm Rectangular 60 x 80 –100 x 140 mm 60 x 80 –100 x 200 mm 80 x 100 –150 x 200 mm - Wall thickness 1.5 mm – 5.0 mm 2.0 mm – 6.0 mm 2.0 mm – 8.0 mm - Tube length 6.0 m - 12.0 m 6.0 m - 12.0 m 6.0 m - 12.0 m - Line Speed Max. 45m/min Max. 40 m/min Max. 40 m/min - Welding Method Solid State High Frequency Welding Solid State High Frequency Welding Solid State High Frequency Welding - Forming Method Directly Forming to Square and Rectangular tube Directly Forming to Square and Rectangular tube Directly Forming to Square and Rectangular tube Finished Products

Brief Introduction For getting larger capacity and effective operation, adopting the latest abroad advanced technology, we developed this full automatic cake production line. Making cake process: Mixing--Oil sprayer --Forming--Baking--Demolding --Empty trays reuse-cooling--Filling--Sterilization--Packing. Each machine function: 1) Inflatable continous mixer: putting powder, eggs and so on into the tank, stirring enough dough for the whole line 2) Oil spray machine: spray oil before depositing for better taste and easier demolding 3) Cake forming machine: air cylinder, photoelectric tracking, PLC control, depositing dough accurately. 4)Tunnel baking oven: gas/electric tunnel oven available. 5)Demolding: sucking the cake from the trays to the cooling line. 6) Empty trays reuse: after demolding, the empty trays clean and recycle use. 7) Cooling line: natural cooling. 8) Cake filling machine: injecting chocolate syrup/cream/jam into the cake. 9) Sterilization: kill bacteria and microorganisms after filling for better cake quality. 10)Packing machine: various packing type available. 11) Nitrogen making machine and oil free compressor: inflate the nitrogen air into the packing bag for keeping the cake shelf life at least 6 months Tips on the whole line: Machines takes area: 100*10m Output: 500kg/h    cake size:15-80g Tray size: 600*800mm Cake shapes depends on the cake trays Machine pictures and cake samples:

Brief Introduction YX Jam Biscuit Production Line: Adpoting the latest advaced Genmany and Janpanese technology, With the effort of our company R&D engineers and 30 years manufacturing experience, we created this compact structure, high automatic biscuit machine. Making Jam biscuit process: Mixing---Forming--Jam depositing--Baking--Cooling ---Packing. Each machine function: 1) Mixer: Stirring flour, water and other materials together. "S" blade inside one 2) Biscuit forming machine: forming different shapes  biscuit 3) Jam depositing machine: depositing jam on biscuit surface 4) Tunnel Baking oven: gas/electric oven, baking soft/hard biscuit, cookies, cake,bread and so on. 5) Cooling line: natural cooling 6) Stacking biscuit: make the cooled biscuit stack in a row and easy for putting them into the packing hopper 7) Packing machine: various packing type available. Tips on the whole line: Jam biscuit machine type: YX250/300/400/480/600/800/1000/1200   customized machine available. Capacity range: 50-800kg/h 90/180 swerve machine for your choice according to the facotry size. Basic formula, training, installation services Machine pictures and cookies samples:

More than 45 years of professional manufacturing experience, WUXI TBS SCIENCE AND TECHNOLOGY CO., LTD have been one of the leading manufacturer in China,mainly specialize in ERW Tube&Pipe Mill Line, Slitting Line, Cut To Length Line, etc. Throughout many decades team efforts for improvement of superior product quality and pursuit of advanced technology, we have widely won high praise from domestic and overseas customer. We always keep strong faith in “Thinking for what customer think”. Our mission: “Customized Technical Support,Most Cost-Effective Commerical Solution,High Performace Machine Supply,Reliable Service After-Sales” This line is used for coil with different specifications, through uncoiling-slitting-recoiling to needed width coil for the application of all kinds of stamping line. This line is reasonable in layout, easy operation, high level of automation, high productivity which could processing all kinds of CR and HR coil, silicon coil, stainless steel coil, colored coil, aluminum coil, galvanize coil or painted coil. This line is broadly applying in metal plate processing industry, like car, container, household appliance, packing, construction material, etc. This line is composed of coil car, uncoiler, slitter, scrap winder, shearer cutting coil head or tail, tension pad and recoiler, etc. as well as pendulum middle bridge, pinch device, steering device. This line is an auto coil processing equipment which integrate mechanical, electrical, hydraulic, pneumatic all together. The machine performance has reached the international standard. This slitting line series coil thickness range can be from 0.3mm to 3.0mm and coil width can be from 600mm to 1600mm,all these size steel coils are produced with large output, best quality and high precision.Our customized machines are also can be used for different processed material and meet nearly all applications. Specification of Steel Slitting Line Model THS2X1300 THS2X1600 THS3X1300 THS3X1600 Coil Thickness(mm) 0.3-2.0 0.3-2.0 0.5-3.0 0.5-3.0 Coil Width(mm) 600-1300 600-1600 600-1300 600-1600 No. of Strips 2-20 2-20 2-15 2-15 Strip Width precision(mm) ±0.1 ±0.1 ±0.15 ±0.15 Line Speed(m/min) 10-120 10-120 10-120 10-120 Coil Weight(T) 10 15 20 30 Coil I.D(mm) φ508 φ508 φ508,φ610 φ508,φ610 Recoiling I.D(mm) φ508 φ508 φ508 φ610 Main Shaft Dia(mm) φ220 φ240 φ240 φ240

Equipment profile: It is widely used in packing filling of sweetened bean paste, filling of lotus meat, fruit jam, Chinese watermelon jam, cheese jam, sauce, salad, lotion, liquid, semi liquid. Equipped with input pump, the machine could automatically pack the products in high temperature that will improve the productivity, decrease the cost, and avoid making the twice packing.

Brief Introduction: The semi automatic cake production line suits for small space and lower budget factory. it baked by the hot wind rotary oven machine. Making cake process: Mixing --Forming--Baking--Cooling--Filling--Sterilization--Packing. Each machine function: 1) 60L Mixer: putting powder, eggs and so on into the tank, 2) Cake forming machine: air cylinder, photoelectric tracking, depositing dough accurately. single/double rows forming machine available. 3)Hot wind rotary oven: gas/electric/diesel rotary oven for baking.   12*/32/64/128 trays suits for your requirement. 4) Cooling line: natural cooling by the PU conveyor or cooling cake on the trolleys. 5) Cake filling machine: injecting chocolate syrup/cream/jam into the cake. 6) Sterilization: kill bacteria and microorganisms after filling for better cake quality. 7)Packing machine: various packing type available. 8) Nitrogen making machine and oil free compressor: inflate the nitrogen air into the packing bag for keeping the cake shelf life at least 6 months Tips on the whole line: Machines takes area: 15*6m Output: 100-300kg/h    cake size:15-80g Tray size: 400*600mm Cake shapes depends on the cake trays Machine pictures and cake samples:

The 4-rope scissors grab is a newly bulk grab, which is suitable to crane with two drum for loading and unloading iron ore, and, coal, bulk fertilizer, and so on. The characteristic of scissor grab is newly structure, convenient operation, and light dead weight, high loading ratio. When the grab loads the iron ore, its ratio is up to 1:2.5. The grab has short opening and closing stroke, it just need a half time for withdrawing out the closing rope, comparing with the grab with long pressing rod, which could improve the loading and unloading efficiency, and decrease abrasion of grab. Type and Size (t) SWL (m3) Volume (t) Dead Weight (mm) Dimensions (mm) Sheave Dia. （m） Use Height (mm) Steel Rope Dia. A B C D E CS16[4]5.5J 16 4 5.5 4325 4475 2675 4590 2000 Ø560 10 Ø26 CS20[5]6.6J 20 5 6.6 4845 5000 2885 5110 2200 Ø650 11.5 Ø28 CS25[6.5]8.3J 25 6.5 8.3 5450 5600 3200 5730 2350 Ø720 12.5 Ø32 CS32[8]11J 32 8 11 6140 6290 3400 6400 2600 Ø800 14.5 Ø36 CS40[10.2]13.5J 40 10.2 13.5 6920 7070 3660 7200 2750 Ø880 16 Ø40 CS52[13]17J 52 13 17 7785 7935 3965 8065 3000 Ø920 18 Ø44 CS63[16.5]21J 63 16.5 21 8600 8815 4300 8930 3300 Ø1120 20 Ø48 Note: 1.As the products have been improved, we will not advice another. 2.We can design and produce the grab according to user’s demand.